LP Tunes Elliptical Replacement for Shure N91ED Stylus

N91E JICO STYLUS REPLACEMENT FOR SHURE N91E STYLUS

The N91E JICO replacement stylus features a highly polishec special elliptical diamond tip bonded to a thin-wall aluminum alloy cantilever for super tracing of record grooves and outstanding sound quality.

NSS/E LP TUNES UPGRADE STYLUS FOR SHURE N91ED STYLUS

● Special limited-run N91ED stylus replacement for Shure M91E, ED cartridge
● Crafted for precision, quality, and performance
● Sound quality (SQ) and performance beyond current production substitutes
● Nude 0.3 x 0.7 mil elliptical diamond tip titanium bonded to custom alloy cantilever
● Low-mass alloy cantilever for groove tracing accuracy and fidelity
● Tracking force range: 0.75 - 1.5 grams
● LP TUNES® stylus - Above and beyond copies and generics

The Nude Schwarz stylus (NSS) raises the bar in stylus performance. For over half a century, the traditional way to craft a stylus, which carries on still today, is to bond the stylus tip to a crown (metal shank) that in turn is bonded to the cantilever. The additional mass, and a different material element in between the diamond tip and cantilever, cause some loss of nuance in transmitting groove modulation from the tip to the cantilever. With the Schwarz edition, a nude diamond stylus (a whole diamond) is inserted, fastened and/or glued directly to the cantilever - banishing the need for the crown (metal shank).

Thus, you can hear higher fidelity and exhilarating sound quality in every NSS stylus that you install in your cartridge! The unencumbered polycrystalline diamond tip (for toughness and longer-playing life) directly traces the grooves for optimal retrieval of record groove modulation.

NOTE: The color of the stylus knob varies depending on supply chain availability.

Upgrade Options
- For upgrade stylus and accessories that enhance sound quality and fidelity, refer to Related Products section. As the price goes up, the tip types get finer, allowing for better fidelity and reduced record wear over time. 

LP TUNES N91VL UPGRADE FOR SHURE N91E N91ED N93E STYLUS
- Sound quality ViVid Line upgrade stylus by LP TUNES

For critical and discerning listening and recording to digital, we recommend the LP Tunes VIVid Line Upgrade replacement for use with the Shure N91ED stylus, all Shure M91, M93E series cartridges and other Shure model cartridges that use the N91 series styli. With the special profile of the Vivid Line diamond, it is able to trace angular groove modulations missed by elliptical and lesser capable diamond tips. For further groove sensitivity and precision, the ViVid Line diamond is bonded to a thin-wall aluminum alloy cantilever. This confluence results in very high fidelity and musicality.

● Acclaimed ViVid Line Contact diamond for excellent tracing accuracy
● Traces the subtlest contours of the grooves with vivid accuracy
● Sound quality and performance exceed current production substitutes
● Diamond tip r/R radii: 6/75 µm (.0002 x .0030 inch)
● Low-mass aluminum cantilever for firm and sensitive response to grooves
● Made by Japanese shokunin seeking to create perfection with each stylus
● Tracking force: 1.0-1.25 grams
● LP TUNES® stylus - Above and beyond copies and generics

Stylus Alternatives
P;ease refer to Product Options below. 

LP TUNES REPLACEMENT FOR SHURE N91-3 NEEDLE STYLUS (78 RPM STYLUS)

Excellent made in Japan 3.0 mil LP Tunes replacement for the Shure N91-3 needle stylus is used with the Shure M91 series and equivalent phono cartridges. The stylus features a highly polished 3.0 mil diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records, especially used records. It results in minimal groove wear and accurate rendition of voice and music.

● 3.0 mil diamond for correct tracing 78 RPM record grooves
● Accurate sound reproduction of 78RPM recorded material
● Precision engineered and exquisitely crafted in Japan
● Genuine, unsurpassed 100% original LP TUNES® stylus

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

Upgrade Stylus Replacements
- Standard 33/45 RPM stylus: LP Tunes N91ED stylus
- Upgrade stylus: LP Tunes N91VL stylus

JICO (NEO) SUPER ANALOGUE STYLUS/SAPPHIRE REPLACEMENT FOR SHURE N91ED N91E NEEDLE STYLUS

The Super Analogue Stylus/Sapphire replacement for the Shure N91E N91ED needle stylus is used with the Shure M91E phono cartridge and its series. The stylus elevates the above cartridge to its pinnacle performance and sound quality. The S.A.S. tips are produced using a natural octahedral single-crystal diamond with the most advanced electronic engineering technology. The cantilever is made of special aluminum alloy tube and boron for extremely efficient transmission of vibrations. Rare earth metals with excellent electromagnetic conductivity compose the magnet for the stylus.

SAS stylus	Line Contact stylus	Elliptical stylus	Conical stylus

1. Compatible with wider and deeper grooves (Micro Groove).
   The diamond tip consists of a meticulously selected natural single-crystal octahedron. Precision work on the crystal allows for a wide range of grooves. The Super Analogue Stylus can safely be used on recent records which tend to have deeper grooves and with 30-280 micron grooves opposed to the simple conventional 30-80 micron.
2. Ultra precision thinness and configuration results in supreme sound reproduction.
   The stylus tip is of optimum height and a uniformly ultra-precision finish. The Super Analogue Stylus has a curvature with a smaller radius that was impossible with the Micro Ridge Stylus. As thin as a razor blade and machined with ultra precision, the stylus tip ensures unsurpassed fidelity.
3. Reduced distortion caused by needle abrasion.
   The Super Analogue Stylus tip eliminates lateral and frontal abrasion. Since the curvature radius does not change, the stylus accurately traces without missing any delicate signals. This makes it perfect for reproducing high frequencies and wide dynamic range which require a highly precise radius for tracking the inner record grooves!
4. Polished finish that virtually preserves your record's grooves.
   World-class polishing technique is used on each stylus. This is designed to preserve the details of the record groove structure for a very long time — virtually for the life of the vinyl.
5. Extreme quality testing with emphasis on performance.
   Stringent quality inspections and tests using unique and high level technology are performed on all materials and at every level — from the manufacture of parts that transmit vibrations to the cartridge (the cantilever, magnet and wire) to the final assembly by skilled artisans.