7/21/2026: LP Tunes unleashes new platform—Unified Solutions Platform (USP)™. It unifies upgrade options on a single page, simplifying customers' search for high-fidelity turntable componentss—such as turntable styli, cartridges, and belts.

ADC R-15E Stylus, Original
Vendor:ADC

ADC R-15E Stylus, Original

$64.90

ADC R-15E ORIGINAL STYLUS

The R-15E stylus is the specified stylus replacement for the ADC 10E Mark IV Cartridge. It feature a .3 x 0.7 mil. Elliptical stylus with a tracking force range of 0.5- 0.7 grams. The stylus can also be used to replace the following ADC Styli: R-26, R-27, R-251, R-252 & R-253.

ADC RK-8 RK8 stylus
Vendor:ADC

ADC RK-8 RK8 Stylus

$34.95

ADC RK-8 RK 8 RK8 STYLUS

The ADC RK-8 RK8 stylus features a conical diamond for long playing life and good rendition of voice and music.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products near the bottom of the page.

ADC RK-8E RK8E stylus
Vendor:ADC

ADC RK-8E RK8E Stylus

$53.00

ADC RK-8E RK8E STYLUS

The ADC RK-8E RK8E needle stylus for the ADC K-8E K8E phono cartridge features a highly polished elliptical diamond designed for more effective tracing of record grooves. It results in very high musical accuracy, better tonal balance and harmonically complete sound quality.

Upgrade Options
- For an upgrade stylus and accessories that enhance sound quality and fidelity, refer to Related Products section near the bottom of this page. As the prices go up on replacement needles, the tip types usally get finer, or an OEM stylus could be offered. Finer cut tips allow for better fidelity and reduced record wear.

ADC RLMA-1 RLMA1 Accutrac stylus
Vendor:ADC
ADC RLMA-1 RLMA 1 RLMA1 ACCUTRAC STYLUS

The ADC RLMA-1 RLMA1 Accutrac stylus is used with the ADC LMA-1 LMA1 and LMA-3 LMA3 phono cartridges.

ADC RLMA-3 RLMA3 Accutrac stylus
Vendor:ADC
ADC RLMA-3 RLMA 3 RLMA3 ACCUTRAC STYLUS

The ADC RLMA-3 RLMA3 Accutrac stylus is used with the ADC LMA-3 LMA3 and ADC LMA-1 LMA1 phono cartridges.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products.

ADC RPSX-10 RPSX10 stylus - original
Vendor:ADC
ADC RPSX-10 RPSX 10 RPSX30 STYLUS-ORIGINAL

The ADC RPSX-10 RPSX10 stylus features a highly polished special 0.65 bonded conical diamondfor long playing life, precision tracing of record grooves and accurate rendition of voice and music.

ADC RPSX-30 RPSX30 stylus
Vendor:ADC

ADC RPSX-30 RPSX30 stylus

$83.00
ADC RPSX-30 RPSX 30 RPSX30 STYLUS

The ADC RPSX-30 RPSX30 stylus features a highly polished special elliptical diamond with a .0003 x .0007 inch tracing radii for long playing life, precision tracing of record grooves and accurate rendition of voice and music.

ADC RPSX-40 stylus - <font color=#339900>Sold Out</font>
Vendor:ADC

ADC RPSX-40 stylus

$0.00
ADC RPSX-40 STYLUS

We apologize, but this item is currently unavailable and we're not sure if and when we will receive more.

The ADC RPSX-40 stylus features a highly polished special elliptical diamond with a .0003 x .0007 inch tracing radii for long playing life, precision tracing of record grooves and accurate rendition of voice and music. The ADC RPSX-40 stylus is used with the ADC PSX-40 cartridge and its series.

ADC RS-IV RSIV stylus
Vendor:ADC

ADC RS-IV RSIV stylus

$79.99
ADC RS-IV RS IV RSIV STYLUS

Genuine ADC RS IV stylus for Digital Series IV and to upgrade lower model Digital series cartridges. The ADC RS IV stylus features a highly polished .0002 x .0007 inch Nude Micro Ellipse diamond tip designed for highly precise tracing of record grooves. It results in excellent musical accuracy, improved tonal balance and higher sound quality. The stylus is made in USA by Audio Dynamics Corp (ADC).

ADC Series IV cartridge | ADC RS IV stylus Details
- Diamond tip: Nude Micro Ellipse
- Diamond tip dimensions: .0002 x .0007 inch
- Tracking force: 1.2 g +/- .02 g
- Frequency response: 15 Hz - 25 kHz +/- 2dB
- Output @ 5 cm/S: 4 mV
- Channel balance: 1 db maximum
- Channel separation @ 1k | 10kHz: 26 dB | 15 dB
- Inductance: 589 mH
- Resistance: 820 Ohms
- Load Resistance: 47 k Ohms
- Load capacitance: 275 pf
- Cartridge weight: 5.75 g

ADC RSQ-36 RSQ36 stylus
Vendor:ADC

ADC RSQ-36 RSQ36 stylus

$69.95

ADC RSQ-36 RSQ 36 RSQ36 STYLUS

The ADC RSQ-36 RSQ36 needle stylus features a highly polished .0003 x .0007 inch special elliptical diamond for excellent tracing of record grooves. It results in very accurate playback of recorded voice, music and harmonics.

For an alternative stylus replacement, refer to the Related Products.

ADC RXM-II RXMII stylus - <font color=#339900>Sold Out</font>
Vendor:ADC

ADC RXM-II RXMII stylus

$114.95
ADC RXM-II RXM II RXM II RXMII STYLUS

We apologize, but this item is currently unavailable and we're not sure if and when we will receive more.

The genuine ADC RXM-II RXMII stylus is designed to meet original manufacturer specifications and performance. The stylus features a highly polished and precision profiled nude special elliptical diamond for excellent tracing of record grooves thus resulting in very fine detail, clarity and harmonically rich sound quality.

For an alternative stylus replacement, refer to the Related Products.

ADC stylus for ADC 26 cartridge - <font color=#339900>Sold Out</font>
Vendor:ADC
ADC STYLUS FOR ADC 26 CARTRIDGE

We apologize, but this item is currently unavailable and we're not sure if and when we will receive more.

The ADC stylus for the ADC 26 cartridge features a highly polished special elliptical diamond with a .0003 x .0007 inch contact and lateral radii. It offers superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality.

ADC stylus for ADC Integra ST XLM II cartridge - <font color=#339900>Sold Out</font>
Vendor:ADC
ADC STYLUS FOR ADC INTEGRA ST XLM II CARTRIDGE

We apologize, but this item is currently unavailable and we're not sure if and when we will receive more.

The ADC RXM-II RXMII stylus for the ADC Integra ST XLM II cartridge features a highly polished elliptical diamond for superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality. The stylus is designed to bring the cartridge back to its original performance and specifications.

For an alternative stylus replacement refer to Related Products.

ADC stylus for ADC PSX-40 cartridge - <font color=#339900>Sold Out</font>
Vendor:ADC
ADC STYLUS FOR ADC PSX-40 CARTRIDGE

We apologize, but this item is currently unavailable and we're not sure if and when we will receive more.

The ADC RPSX-40 stylus for the ADC PSX-40 cartridge features a highly polished nude special elliptical diamond for superior accuracy and harmonically opulent rendition of voice and music.

ADC stylus for ADC SER-III SERIII cartridge
Vendor:ADC
ADC STYLUS FOR ADC SER-III SERIII CARTRIDGE

The ADC RPSX-30 RPSX30 stylus for the ADC SER-III SERIII cartridge features a highly polished special elliptical diamond with a .0003 x .0007 inch tracing radii for long playing life, precision tracing of record grooves and accurate rendition of voice and music.

For an original ADC stylus replacement that offers higher fidelity and sound quality, refer to the Related Products.