The new LP TUNES is live as a pre-release. Product options are presented on a single page so you can make the best purchase decision.

Cartridge mounting service - special order
Vendor:LP Tunes
CARTRIDGE INSTALLATION SERVICE

A special order to mount and install a cartridge on a headshell from our inventory. As a special order, once initiated the combined work and associated parts are non-cancellable and non-returnable, except for subsequent warranty-related work.

4.7
ADC K8C Cartridge with half-inch mount black headshell
Vendor:ADC
ADC K8C CARTRIDGE WITH HALF-INCH MOUNT BLACK HEADSHELL RC398-DP

ADC K8 Cartridge Specification
- Frequency Response: 15hz-20khz
- Channel Separation: 24 (dB at 1 kHz/10 jHz)
- Vertical tracking force (grams): 1.0-2.0
- Recommended load impedance (ohms): 47k
- Output: 5 mv

ADC K8C Cartridge with half-inch mount Silver headshell
Vendor:ADC
ADC K8C CARTRIDGE WITH HALF-INCH MOUNT SILVER HEADSHELL RC398-DP

ADC K8 Cartridge Specification
- Frequency Response: 15hz-20khz
- Channel Separation: 24 (dB at 1 kHz/10 jHz)
- Vertical tracking force (grams): 1.0-2.0
- Recommended load impedance (ohms): 47k
- Output: 5 mv

5.0
LP Tunes AT95E Pre-mount
Vendor:LP Tunes

LP Tunes AT95E Pre-mount

$109.93

LP Tunes AT95E Pre-mount

The LP Tunes AT95E Pre-mount is an AT95E cartridge mounted onto a world-class HD headshell for your convenience.

  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted AT95E cartridge

Audio-Technica AT95E Phono Cartridge Specifications
- Output voltage @ 1kHz,5cm/sec.: 3.5mV
- Channel balance: 2dB
- Channel separation @ 1kHz: 20dB
- Frequency response: 20Hz-20kHz
- Dynamic compliance (x10-6 cm/dyne): 6.5
- Static compliance (x10-6 cm/dyne): 20
- Load resistance: 47k ohms
- Load capacitance: 100 - 200 pF
- Stylus type: 0.4 x 0.7 mil elliptical diamond
- Tracking force range: 1.5 - 2.5 g
- Tracking force recommended: 2 g (20 mN)
- Vertical tracking angle: 20
- Coil impedance at 1kHz: 2.8k ohms
- Coil inductance at 1kHz: 400 mH
- Recommended load resistance: 47k ohms
- Color: Black/Green
- Weight: 6.5 g
- Dimensions: 30.5l x 17w x 17.20h
- Stylus replacement: Audio-Technica ATN95E

LP Tunes AT95SA Pre-mount
Vendor:LP Tunes

LP Tunes AT95SA Pre-mount

$236.98
LP Tunes AT95SA Pre-mount

This LP Tunes Pre-mount consists of an AT95SA cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted AT95SA cartridge
5.0
LP Tunes AT95VL Pre-mount
Vendor:LP Tunes

LP GEAR AT95VL Pre-mount

$192.98
LP GEAR AT95VL Pre-mount

This LP Gear Pre-mount consists of an AT95VL cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition half-inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted AT95VL cartridge
LP Tunes Audio-Technica AT120E Pre-mount
Vendor:LP Tunes
LP Tunes Audio-Technica AT120E Pre-mount

This LP Tunes Pre-mount consists of an Audio-Technica AT120E cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted Audio-Technica AT120E cartridge
3.0
LP Tunes Grado Blue 1 Pre-mount
Vendor:LP Tunes
LP Tunes Grado Blue 1 Pre-mount

This LP Tunes Pre-mount consists of an Grado Blue 1 cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted Grado Blue 1 cartridge
LP Tunes Grado Red 1 Pre-mount
Vendor:LP Tunes

LP Tunes Grado Red 1 Pre-mount

$204.95
LP Tunes Grado Red 1 Pre-mount

This LP Tunes Pre-mount consists of an Grado Red 1 cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted Grado Red1 cartridge
LP Tunes Grado Silver 1 Pre-mount
Vendor:LP Tunes
LP Tunes Grado Silver 1 Pre-mount

This LP Tunes Pre-mount consists of an Grado Silver 1 cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted Grado Silver 1 cartridge
LP Tunes M97xVL Pre-mount
Vendor:LP Tunes

LP Tunes M97xVL Pre-mount

$599.00
LP Tunes M97xVL Pre-mount

This LP Tunes Pre-mount consists of an M97xVL cartridge mounted on a world-class Ultimate headshell for your convenience.
  • LP Tunes Ultimate inch mount headshell
  • Finely processed Duralumin alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted M97xVL cartridge
5.0
LP Tunes Nagaoka MP110 Pre-mount
Vendor:LP Tunes
LP Tunes Nagaoka MP110 Pre-mount

This LP Tunes Pre-mount consists of an Nagaoka MP110 cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted Nagaoka MP110 cartridge
Vendor:LP Tunes
LP Tunes Nagaoka MP300 Pre-mount

This LP Tunes Pre-mount consists of an Nagaoka MP300 cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted Nagaoka MP300 cartridge
4.5
LP Tunes Nagaoka MP500 (MP-500) Pre-mount
Vendor:LP Tunes

LP Tunes Nagaoka MP500 (MP-500) Pre-mount

This LP Tunes Pre-mount consists of an Nagaoka MP500 cartridge mounted onto a world-class HD headshell for your convenience.

  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • Gold-plated headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted Nagaoka MP500 cartridge
LP Tunes Ortofon 2M Black Pre-mount
Vendor:LP Tunes
LP Tunes Ortofon 2M Black Pre-mount

This LP Tunes Pre-mount consists of an Ortofon 2M Black cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted Ortofon 2M Black cartridge