Products

1BY ONE 471NA-0010 BLUETOOTH TURNTABLE BELT REPLACEMENT

1BYONE H004 TURNTABLE BELT REPLACEMENT

45 RPM RECORD INSERTS

Enjoy your 45 RPM records again with this set of 10 record inserts! These delightfully yellow inserts allow a 45 RPM record to be played on any phonograph or record changer with a standard center post spindle. The insert is designed to quickly lock into place, hold securely, and snap out easily for removal.

JVC 4DT-20X SHIBATA STYLUS FOR JVC 4MD-20X CARTRIDGE

The JVC 4DT-20X stylus is the original Shibata stylus for the 4DT-M20X cartridge. It features a special Shibata diamond for superlative tracing of record grooves and reduced distortion and record wear. It results in excellent musical accuracy, naturally sweet tone and complete harmonic integrity. The stylus is made in Japan by Audio-Technica.

LP TUNES 78 RPM REPLACEMENT FOR AUDIO-TECHNICA ATP-N2 (ATPN2) NEEDLE STYLUS

The 78 RPM replacement for the Audio-Technica ATP-N2 ATP N2 needle stylus is used with the Audio-Technica ATP-1, ATP-2, ATP-3 Professional Series cartridges and the Audio-Technica Compass ATX1, ATX3E, ATX5E cartridge series. The stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate reproduction of voice and music.

One common end-user mistake is that an standard LP stylus can be correctlly used for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records. Otherwise with just a single playing, you could ruin the fidelity of the record grooves. Also, the LP stylus is much narrower than the 78 RPM record groove thus the tip slides to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

For LP capable needles in this series, and other phono essentials, see the Related Items section near the bottom of this page

LP TUNES 78 RPM REPLACEMENT FOR CEC CZ-800 CZ 800 CZ800 NEEDLE STYLUS

The LP TUNES 78 RPM version of the CEC CZ-800 CZ800 needle stylus is specifically designed for replaying 78 RPM records. It features a spherical 3.0 mil diamond tip for long playing life, more effective tracing of 78 RPM record grooves and good rendition of voice and music.

A very common end-user mistake is that you can use a standard LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record you really need to use a stylus designed for the wider-grooved 78 RPM records. Otherwise, with just a single playing, you risk damaging the fidelity of the record grooves. Also the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

78 RPM STYLUS FOR CROSLEY CR-8016A CR 8016A CR8016A MESSENGER TURNTABLE

The Crosley CR-8016A CR 8016A CR8016A Messenger turntable was fitted with a phono cartridge and a needle stylus. A photo of the stylus replacement is supplied above. The stylus features a 3.0 mil diamond for correctly playing 78 RPM records. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

To maintain the playback fidelity of your 78 record you really need to use a stylus designed for 78 RPM records. A very common misconception is that you can use a LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 record grooves. Moreover, the LP stylus is much narrower than the 78 record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high surface noise.

If the stylus above differs from what you have,
then it means you no longer have the fitted
cartridge. For us to assist you further, we
need the cartridge brand and model number. This
info is usually inscribed on the cartridge and
stylus.

78 RPM REPLACEMENT FOR CROSLEY NP-3 NP 3 NP3 NEEDLE STYLUS

The 78 RPM replacement for the Crosley NP-3 NP3 needle stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

For LP capable needles in this series, and other phono essentials, see the Related Items section near the bottom of this page

78 RPM REPLACEMENT CROSLEY NP-4 NP 4 NP4 NEEDLE STYLUS

The 78 RPM replacement for the Crosley NP-4 NP4 needle stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. The stylus is made in Japan by a world-class manufacturer with a reputation for crafting musically excellent and high-quality replacement styli.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

78 RPM REPLACEMENT FOR CROSLEY NP-5 NP5 NEEDLE STYLUS

The 78 RPM replacement for the Crosley NP-5 NP5 needle stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

For the 33.3 and 45 RPM stylus replacements refer to Related Products.

78 RPM REPLACEMENT FOR CROSLEY NS-1 NS 1 NS1 NEEDLE STYLUS

The 78 RPM replacement for the Crosley NS-1 NS1 needle stylus is used with the Crosley Stack-O-Matic turntables and record changers. This specially crafted stylus features a built-in needle cover/protector and a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

78 RPM REPLACEMENT FOR CURTIS MATHES 402-M208-165 402 M208 165 402M208165 STYLUS

The 78 RPM replacement for the Curtis Mathes 402-M208-165 402M208165 stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. The stylus is made in Japan by a world-class manufacturer with a reputation for crafting musically excellent and high-quality replacement styli.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

78 RPM REPLACEMENT FOR ION CZ-800-10 CZ 800-10 CZ800-10 STYLUS

The 78 RPM replacement for the Ion CZ-800-10 CZ800-10 needle stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. The stylus is made in Japan by a world-class manufacturer with a reputation for crafting musically excellent and high-quality replacement styli.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

78 RPM REPLACEMENT FOR ION iCT04RS STYLUS

The 78 RPM replacement for the Ion iCT04RS stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

78 RPM REPLACEMENT FOR ION iCT04RS STYLUS

The 78 RPM replacement for the Ion iCT05RS stylus is used with the Ion iCT05 phono cartridge. The stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.