Audio-Technica

AUDIO-TECHNICA ATH-PRO5 ATH PRO5 ATHPRO5 MS HEADPHONES

The Audio-Technica ATHPRO5 MS headphones are used by many Professionals and DJs. These distinctive headphones offer musical excellence that made Audio-Technica professional gear the choice of major recording artists and audio professionals worldwide. Please note that these headphones require about 80-100 hours of use before they will reveal their high performance status.

The Audio-Technica ATHPRO5 MS headphones offer five compelling advantages over other products:

- Musicality and accuracy with rich bass response and extended high end - the competency that has made Audio-Technica the choice of major recording artists and audio professionals worldwide
- Rotating earpieces with camouflage housing for easy one-ear monitoring
- Ultra-flexible coiled cable with left-side entry
- Legendary quality, consistency, durability and value
- Over the ear closed-back design

The Audio-Technica ATHPRO5 MS headphones can be used with all audio sources with professional quality results.

Audio-Technica ATHPRO5 MS Headphones Specifications
-Type: Closed-back dynamic
-Driver diameter: 40 mm
-Magnet: Neodymium
-Frequency response: 15Hz-28kHz
-Voice coil: Copper clad aluminum wire
-Maximum input power: 1,300 mW
-Sensitivity: 103 dB/mW
-Impedance: 40 ohms
-Weight: 200 g
-Cable: 1.5 m (single) OFC stereo mini gold-plated plugs; Detachable 1/4" (6.3 mm) adapter
-Warranty: Two-year limited warranty

Audio-Technica ATHPRO5V AT-HPRO5V AT HPRO5V headphones are used by many Professionals and DJs. We're not suprised. The Audio-Technica ATHPRO5V AT-HPRO5V AT HPRO5V headphones offer musical excellence that made Audio-Technica professional gear the choice of major recording artists and audio professionals worldwide. Please note that these headphones require about 80-100 hours of use before they will reveal their high performance status.

The Audio-Technica ATHPRO5V AT-HPRO5V AT HPRO5V headphones offer five compelling advantages over other products:

• Musicality and accuracy with rich bass response and extended high end the competency that has made Audio-Technica the choice of major recording artists and audio professionals worldwide
• Rotating earpieces with comouflage housing for easy one-ear monitoring
• Ultra-flexible coiled cable with left-side entry
• Legendary quality, consistency, durability and value
• Over the ear closed-back design

The Audio-Technica ATH-PRO5 V headphones can be used with all audio sources with professional quality results.

More info is provided below.

Audio-Technica ATH-PRO5 V
Type	Closed-back Dynamic
Driver Diamter	40 mm
Magnet	Neodymium
Frequency response	15-28,000 Hz
Voice coil	Copper clad aluminum wire
Maximum input power	1,300 mW
Sensitivity	103 dB/mW @ 1kHz
Impedence	40 ohms
Weight	200 g
Cable	1.5 m (single) OFC stereo mini gold-plated plugs; Detachable 1/4" (6.3 mm) adapter
Warranty	Two-year limited warranty
Retail Price	$119.00

This document is protected by copyright.
Copyright 2007 LP Tunes . All rights reserved.

AUDIO-TECHNICA ATN-103 ATN 103 ATN103 NEEDLE STYLUS

The Audio-Technica ATN-103 ATN103 needle stylus is masterfully crafted by Audio-Technica and is designed for use in Mister Disc and Sound Burger portable turntables. The stylus is made in Japan by Audio-Technica.

AUDIO-TECHNICA REPLACEMENT ATN-120E STYLUS

The Audio-Technica replacement ATN-120E stylus has enhanced accurate tracing and tracking of record grooves with its 0.3 x 0.7 mil elliptical diamond all while providing the user an outstanding listening experience.

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus please contact us here

Stylus Upgrade Options
Premium Upgrade: ATN440MLb
Superior Upgrade: ATN150Sa
Ultimate Upgrade: ATN150MLX

For enhancements to sound quality and fidelity please refer to the Related Products below.

AUDIO-TECHNICA ATN-125LC ATN 125LC ATN125LC NEEDLE STYLUS
- Discontinued, see Related Products for replacements.

The Audio-Technica ATN-125LC ATN125LC needle stylus was discontinued decades ago and is no longer available. The stylus featured a highly polished linear contact diamond for superior tracing of record grooves and very high resolution and reproduction clarity. The stylus was made in Japan by Audio-Technica.

AUDIO-TECHNICA ATN-13EaX ATN 13EaX ATN13EaX NEEDLE STYLUS
-Out of stock, discontinued. For alternative stylus replacement, refer to Related Products below.

The Audio-Technica ATN-13EaX ATN13EaX needle stylus is the best performance replacement stylus, within the ATN-13Ea, ATN-13EaV, ATN-13EaX styli series for use with the Audio-Technica AT-13Ea, AT-13EaV, AT-13EaX cartridge series. The stylus features a nude elliptical diamond with a .0002 x .0007 inch scanning radii. It offers excellent tracing of record grooves, long playing life and accurate reproduction of voice, music and harmonics. The stylus is made in Japan by Audio-Technica.

Audio-Technica ATN13EaX Stylus Specifications
- Frequency response: 10Hz-30kHz
- Output voltage @ 1kHz, 5cm/sec.: 4.0mV
- Channel balance: 1dB
- Channel separation @ 1kHz: 27dB
- Stylus type: .0002 x .0007 inch nude elliptical
- Cantilever: Tapered
- Tracking force range: 0.75-1.75 g
- Color: Orange

AUDIO-TECHNICA ATN-14 ATN 14 ATN14 NEEDLE STYLUS

The Audio-Technica ATN-14 ATN14 needle stylus is no longer available from Audio-Technica but we have a few original units available for those committed to the exquisite sound of the Audio-Technica AT-14Sa AT-14Sa phono cartridge, its variants and as an upgrade for the Audio-Technica AT-13Ea AT13Ea phono cartridge. The stylus featured a nude Shibata diamond mounted on a tapered aluminum alloy cantilever for superlative tracing of record grooves and reduced distortion and record wear. It resulted in excellent musical accuracy, naturally sweet tone and complete harmonic integrity. The stylus was made in Japan by Audio-Technica.

AUDIO-TECHNICA ATN-15 ATN 15 ATN15 NEEDLE STYLUS
- Currently unavailable. We don't know if this item will again be back in stock. For alternative stylus replacements, refer to Related Products below.

The Audio-Technica ATN-15 ATN15 needle stylus features a nude Shibata diamond mounted on a tapered aluminum alloy cantilever. The Audio-Technica ATN-15 ATN15 needle stylus is no longer available from Audio-Technica, but we have a few units available for those committed to the exquisite sound of the Audio-Technica AT15S, AT15SS and AT15Sa phono cartridges. The stylus is made in Japan by Audio-Technica.

Audio-Technica Stylus Specifications
- Generating element: Dual moving magnet
- Frequency response: 5Hz-45kHz
- Output voltage @ 1kHz,5cm/sec: 2.7mV
- Channel separation @ 1kHz/10kHz: 30/23dB
- Channel balance: 0.75dB
- Stylus shape: Shibata
- Stylus construction: Nude
- Cantilever: Tapered
- Tracking force: 0.75-1.75 g

AUDIO-TECHNICA ATN-152MLP ATN 152MLP ATN152MLP NEEDLE STYLUS

The Audio-Technica ATN-152MLP ATN152MLP needle stylus is discontinued and is no longer available. The stylus featured a MicroLine diamond for superior extraction of music from record grooves. It resulted in finer harmonic detail, dynamic contrast and clarity. It offered superlative performance with less wear and distortion than elliptical or conventional linear contact styli. The small curving rate of the stylus enabled it track and playback the inner part of the record groove that other styli can hardly maintain. Also, the curving rate of the stylus did not change until the stylus was almost worn unlike that of conventional styli which increased as they were used. Accordingly, the stylus has a much longer average playing life. The stylus was made in Japan by Audio-Technica.

For an alternative stylus replacement, refer to the Related Products.

AUDIO-TECHNICA ATN-15Sa ATN 15Sa ATN15Sa NEEDLE STYLUS
- Currently unavailable. We don't know if this item will again be back in stock. For alternative stylus replacements, refer to Related Products below.

The Audio-Technica ATN-15Sa ATN15Sa needle stylus is no longer available from Audio-Technica, but we have a few units available for those committed to the exquisite sound of the Audio-Technica AT15S, AT15SS and AT15Sa phono cartridges. The stylus is made in Japan by Audio-Technica.

AUDIO-TECHNICA ATN-15SS ATN 15SS ATN15SS NEEDLE STYLUS

We apologize, but this item is currently unavailable and we're not sure if and when we will receive more.

The Audio-Technica ATN-15SS ATN15SS needle stylus for the Audio-Technica AT15SS and other AT15 phono cartridges features a Super Shibata diamond for superior tracking and tracing of record grooves. It offers excellent rendition of voice and music with harmonically complete sound quality. The stylus is made in Japan by Audio-Technica.

 

For an alternative stylus replacement, refer to the Related Products.

AUDIO-TECHNICA ATN-20SS ATN 20SS ATN20SS NEEDLE STYLUS
- Currently unavailable. We don't know if this item will again be back in stock. For alternative stylus replacements, refer to Related Products below.

Discontinued, see the 100% compatible LP Tunes ATN20SS Shibata Replacement

The Audio-Technica ATN-20SS ATN20SS needle stylus features a nude Super Shibata diamond mounted on a thin-wall Beryllium cantilever. This is no longer available from Audio-Technica, but we have a few units available for those committed to the exquisite sound of the Audio-Technica AT-20SS AT20SS phono cartridge. The stylus is made in Japan by Audio-Technica.

AUDIO-TECHNICA ATN-216EP ATN 216EP ATN216EP STYLUS EQUIVALENT

The Audio-Technica ATN216EP stylus equivalent features a highly polished elliptical diamond with a .0003 x .0007 inch radii. It offers precision tracing and tracking of record grooves and superior rendition of voice, music and harmonics. The color of the stylus varies. The stylus is made in Japan by Audio-Technica.