Cartridges

LP TUNES T4P REFERENCE SERIES VML PHONO CARTRIDGE

For those seeking the ultimate reference quality P-mount phono cartridge, the VML is the long-awaited cartridge that has been missing in P-mount cartridges.

● Ultimate reference quality Microline-diamond-based P-mount T4P cartridge
● Made in Japan to reproduce with peerless fidelity and sound quality
● Made by Japanese shokunin seeking to create perfection with each stylus
● Nude Super MicroLine diamond tip radius: .000079 x .0031 inch
● Low-mass aluminum alloy cantilever for tracing accuracy and fidelity
● LP TUNES® stylus - Above and beyond copies and generics

By conviction, the LP Tunes T4P Series of cartridges offer world-class craftsmanship, excellent performance, exemplary value, natural and clean tone and musicality in a simple functional package. They are fitted for P-mount or T4P tonearms. Each is crafted with tolerances held to mere thousandths of an inch. Stringent quality control assures that tolerances and performance criteria are maintained for each product. As in other series within the LP Tunes magnetic phono cartridge range, your investment in a cartridge does not become obsolete. When your appreciation of music and critical listening develop and your demands for sophisticated electronics grow, you can easily and sensibly upgrade performance by installing a better stylus within the series. Or vice versa, if you determine that you do not need the performance of your existing cartridge, then you can choose a less capable stylus to lower performance. With LP TUNES cartridges, you decide how far you want to go with your music.

The LP TUNES T4P Reference Series VML offers pinnacle performance, musicality and fidelity. It features a nude Microline diamond tip, each exquisitely polished to perfection and then precision nude mounted on a thin alloy tubular cantilever for long playing life and exceptional tracing of record grooves. Due to the Microline's exceptional extractive prowess, it is featured only in the top cartridge models where detail and clarity are paramount performance objectives.

The result - excellence in musical accuracy and faithfulness to the artist's original ambitions.

Application Note:
The LP TUNES SERIES VML phono cartridge may be used as direct replacement for the following cartridges: Audio-Technica I-LT, IILT (Tan), 20E/U, 30E/U, AT97E/U, AT98E/U, AT111E/U, AT112E/U, AT113LC/U, AT250, AT250G, AT420E/U, AT440E/U, AT450, AT460LC/U, AT733, AT2000XE, ATU4000, ATU4020EP, ATU4030 (TAN), ATUPM, DB74E, DB83E, DR200E, DR300E, DR350, DR400E, HR101E/U, HR201E/U, HR301E/U, HR401LC/U, PK29P, PK29PC, SERIES I, SERIES III, SERIES V, SERIES VII, SERIES VIII, SS331E/U, SS441E/U, SS551LC/U, TC216EP, TC226EP, TC236EP, TC246LP, TM1, TM3, TM5, TM7, TM8, TR421U, TR431U, TR441U, TR451U, USA5. USA7, USA9, 30E/U, 40 LC/U, 1001, 2002, 3003, 6006, 8008, DC10, DC20, DC30, DR150, DR250, DR350, Dr750, DR950, PT200, PT300, PT600, PT800, SR2, SR4, SR6, VRM1, VRM3, VRM5, Z100X, Z500X, CFT4PSE cartridge. If unsure or need assistance, please contact us.

HANA EL Elliptical MC CARTRIDGE 0.5mV OUTPUT
- Sterephile Recommended Component Class B: same as Koetsu Rosewood Standard ($3495), Soundsmith Zephyr MIMC Star ($1999), Triangle ART Apollo MC ($8000)

The Hana EL is a pleasure to own. It sounds great without being fastidious. It sounds melodious, musical, sweet and warm and slightly on the opposite side of the Denon DL-103. It deoes not deliver a myriad of detailed minutiae which could be a complaint by some who are into the trees than the forest but in term of fervor and emotion that are sometimes sacrificed in the altar of detail, it is worth the miss. Very good indeed- this HANA EL.

Accolades
The Absolute Sound 2017 Editors Choice

Stereophile Recommended Component Class B: 2016, 2017

HANA EL Elliptical MC Specifications
- Stylus Profile: Elliptical
- Cantilever: Aluminum
- Output Level @ 1kHz: 0.5mV
- Output Balance @ 1kHz: Less Than 2dB
- Vertical Tracking Force: 2 grams
- Trackability: 70 um/2 grams
- Separation @ 1kHz: 25 dB
- Frequency Response: 15-30,000 Hz
- Impedance @ 1 kHz: 130 Ohms
- Suggested Load: 400 Ohms
- Cartridge Weight: 5 Grams
- Body Color: Moss Green

For those seeking further musical elation, the A3SV is ready to bring you there. With a Super Vivid Line diamond ensconced on a special type aluminum cantilever, it offers a higher elevation in clarity and spatial detail while preserving its naturally organic sound. More information comes through, more air and focus and a clearer view into the soundstage.

The Vessel A3SV Cartridge Specifications
- Type: Moving Magnet
- Frequency range: 20-28,000 Hz
- Output voltage @ 1kHz: 2.5 mV
- Channel balance @ 1kHz: <1.5dB
- Channel separation @ 1kHz: 22dB
- Dynamic compliance (100Hz): 10 10-6 cm/dyne
- Tracking ability at 2.0 g : 70 m
- Cantilever: Special type aluminum pipe
- Stylus type: Nude Super Vivid Line Contact
- Stylus tip radius: .0002 x .00078 inch
- Tracking force: 2.0 g
- Internal impedance @ 1kHz: 670 ohms
- Internal inductance: 285 mH
- Recommended load resistance: 47 kOhm
- Cartridge color, body/stylus: Black/Gold/Red
- Weight: 6.0 g
- Mounting hardware included: 2 Screws, 2 Nuts
- Stylus replacement: A3SV stylus

The much improved Shure V15VxMR requires only one gram of tracking force to extract groove information from your LP. Shure engineers worked their magic to make this latest incarnation truly the best sounding V15V ever.

A recipient of numerous favorable reviews from both the press and users, the Shure V15VxMR was recently chosen by The Absolute Sound (Issue 137 & 144 October/November 2003) as an Editors Choice Best Buy Phono Cartridge.

Shure V15VxMR Phono Cartridge Specifications
- Tonearm mount: 1/2 inch
- Type: Moving magnet
- Features: Dynamic stabilizer damper, de-staticizer, die-cast aluminum mounting block, side guard stylus protection
- Output voltage @ 1kHz,5cm/sec.: 3mV
- Frequency response: 20Hz-22kHz +/-2dB
- Load impedance: 47k ohms
- Channel separation @ 1kHz: >30dB
- Stylus type: MASAR polished nude micro-ridge 0.15 mil x 3 mil
- Stylus replacement: Shure VN5xMR
- Cantilever: MICROWALL/Be - ultra low mass, beryllium/tubular, 0.5 mil wall thickness, 18 mil diameter
- Tracking force: 0.75 - 1.5 g
- Weight: 6.6 g
- Accessories included: Headshell, user guide, mounting hardware, stylus cleaning brush, stylus guard, cartridge alignment protractor
- Warranty: 1 year

The Shure M35S combines high sonic accuracy and incredible skip resistance, all while keeping record wear to a minimum. It captures every nuance of a recording from deep drop bass to exceptionally clear mid and high frequencies. Designed specifically for use with House/Techno mixing environments, the cartridge's low record wear helps DJs preserve hard-to-replace vinyl, while its high skip resistance serves as a safeguard against the hazards of back-cueing.

The Shure M35S's versatile Type I medium-diameter cantilever can stand up to continuous, demanding use, yet it is sensitive enough to trace signal modulations as small as a millionth of an inch. With a tracking force range of 1.5 - 3 grams, the Shure M35S provides excellent skip resistance.

The Shure M35S comes with an extra set of 4 headshell wires, a stylus cleaning brush, headshell weight, a user guide, mounting hardware and a stylus guard.

Shure M35S Phono Cartridge Specifications
- Mounting: 1/2 inch
- Type: Moving magnet
- Output voltage @ 1kHz,5cm/sec: 6mV RMS
- Recommended load: 47k ohms in parallel with 250 pf
- Tracking force: 1.5 - 3 g
- Stylus cantilever: Shure type I - low mass, heat-treated aluminum alloy / tubular, 1 mil wall thickness/30 mil diameter
- Stylus tip: Spherical
- Frequency response: 20Hz-20kHz
- Channel balance: Within 2dB
- Channel separation @ 1kHz: 20dB
- Weight: 6.2 g
- Height: 15.9 mm
- Warranty: 1 year
- Stylus replacement: Single with box and user guide Shure N35S, 4-pack mounted on a card N35SQ, 12-pack mounted on a card N35SZ
- Stylus accessory: Shure N78S for wide groove/78 RPM recordings

The Nagaoka MP-300 phono cartridge offers sophistication, refinement and high-definition at all audible frequencies thus making it one of our favorite phono cartridges. It is nimble on the grooves and easy on the ears so you keep on wanting to listen more. The Nagaoka MP-300 is an advanced technology cartridge that is destined to become a classic out of the box.

- Type: Moving magnet
- Cantilever: High-strength boron
- Stylus type: Superfine polished elliptical bonded diamond
- Weight: 8 g
- Output voltage @ 1kHz,5cm/sec: 5mV
- Frequency response: 20Hz-25kHz
- Channel balance @ 1kHz: > 1dB
- Channel separation @ 1kHz: > 25dB
- Recommended loading: 47k ohms
- Dynamic compliance: 7.2 x 10-6 cm/dyne
- Static compliance: 20 x 10-6 cm/dyne
- Tracking force range: 1.3 - 1.8 g
- Break-in period: 30 hours
- Stylus replacement: Nagaoka JN-P300

The Nagaoka MP-10 phono cartridge offers Nagaoka quality, high track ability, and musical competence at an attractive price. This is a cartridge that will soothe your ears and your wallet.

- Type: Moving magnet
- Cantilever: Aluminum alloy
- Stylus type: Conical diamond with .0006 inch radius
- Weight: 6.8 g
- Output voltage @ 1kHz,5cm/sec: 5mV
- Frequency response: 20Hz-20kHz
- Channel balance @ 1kHz: > 2dB
- Channel separation @ 1kHz: > 22dB
- Recommended loading: 47k ohms
- Dynamic compliance: 5.5 x 10-6 cm/dyne
- Static compliance: 18 x 10-6 cm/dyne
- Tracking force range: 1.5 - 2.5 g
- Break-in period: 30 hours

• LP Tunes High-Definition inch mount headshell
• Aerospace alloy for tensile strength and low resonance
• SOAR HD5 headshell wires for exceptional sound quality
• Aligned length ~52 mm for use with many tonearms
• Alignment adjustable for extra precision and compatibility
• Free alignment protractor
• 16.7g weight with mounted Grado Red1 cartridge

• LP Tunes High-Definition half-inch mount headshell
• Aerospace alloy for tensile strength and low resonance
• SOAR HD5 headshell wires for exceptional sound quality
• Aligned length ~52 mm for use with many tonearms
• Alignment adjustable for extra precision and compatibility
• Free alignment protractor
• 16.7g weight with mounted AT95VL cartridge

• LP Tunes High-Definition inch mount headshell
• Aerospace alloy for tensile strength and low resonance
• SOAR HD5 headshell wires for exceptional sound quality
• Aligned length ~52 mm for use with many tonearms
• Alignment adjustable for extra precision and compatibility
• Free alignment protractor
• 16.7g weight with mounted AT95SA cartridge

The Koetsu Bloodstone Platinum cartridge is a work of art technically and artistically. Each is handmade. Each coil is likewise hand wound. It is designed to visually and sonically deliver music as artfully, technically and artistically as the record artist meant it to be.

Koetsu Bloodstone Platinum Phono Cartridge Specifications
- Body: Bloodstone
- Type: Moving coil
- Coil wiring: Silver-plated copper
- Magnet: Platinum
- Stylus type: Proprietary
- Cantilever: Diamond
- Output voltage: 0.3mV
- Frequency response: 20Hz-100kHz
- Channel balance @ 1kHz: >0.5dB
- Channel separation @ 1kHz: >25dB
- Inner impedance: 5 ohms
- Recommended impedance: 30 ohms
- Weight: 12.5 g
- Compliance: 5 x 10-6 cm/dyne @ 100 Hz

The newly redesigned Statement Platinum1 has had its coil design reconfigured, and the effective moving mass of its generating system has been reduced by 17%. All this is hand-assembled within a machined, new processed, Australian Jarrah wood housing. The Statement Platinum1 model uses a modified four piece OTL cantilever technology achieving a 10% tip mass reduction over the Prestige series and ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Statement Platinum 1 model uses Grado's specially designed elliptical diamond mounted on a brass bushing.

Grado Statement Platinum1 Cartridge Specifications
- Type: MI
- Output voltage: 0.5mV
- Frequency response: 10Hz-60kHz
- Load impedance: 47k ohms
- Channel separation: 40dB
- Stylus type: Grado specially designed elliptical diamond
- Stylus replacement: Factory replaceable
- Inductance: 2mH
- Resistance: 2
- Mounting: 1/2 inch
- Compliance: 20mm/N
- Recommended tracking force: 1.5 g
- Weight: 6.5g

GRADO SILVER 1 SILVER1 PHONO CARTRIDGE

Ships to US only

Grado cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of cartridges are designed for high output and excellent stability under the most demanding conditions. All of the the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height, width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance. Grado Silver uses a four piece OTL cantilever system, ultra-high purity long crystal oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing.

Grado Silver 1 Phono Cartridge Specifications
- Type: Moving magnet
- Output voltage: 5mV
- Frequency response: 10Hz-60kHz
- Load impedance: 47k ohms
- Channel separation: 35dB
- Stylus type: Elliptical
- Stylus replacement: User replaceable
- Compliance: 20mm/N
- Tracking force: 1.0 - 2.0 g
- Recommended tracking force: 1.5 g
- Weight: 5.5 g

For stylus replacements, refer to Related Products:
- Standard stylus: Grado Silver Stylus
- Upgrade stylus: Grado Gold Stylus

The Goldring 2300 phono cartridge with its use of the acclaimed Gyger II fine line diamond offers high clarity and excellent tracking ability. This cartridge will upgrade many mid-range turntables, allowing them to produce an even finer sound.

Goldring 2300 Phono Cartridge Specifications
- Mounting: 1/2 inch (12.7 mm)
- Channel balance: 2dB @ 1kHz
- Channel separation: >20dB @ 1kHz
- Output voltage: 6.5mV±1.5dB, 1kHz @ 5 cm/sec
- Static compliance: 20x
- Vertical tracking angle: 24°
- Stylus radius: Gyger II
- Stylus type: Replaceable, Goldring GL2300 stylus
- Load resistance: 47k ohms
- Load capacitance: 100 - 200 pf
- Internal inductance: 680 mH
- Internal resistance: 550 ohms
- Weight: 7.6 g
- Tracking force range: 1.5 - 2.0 g (1.7 g nominal)