Cartridges - HiFi

NAGAOKA JT-555 JT 555 JT555 PHONO CARTRIDGE
- latest stock is Tonar 555 same JT-555 made by Nagaoka for Tonar

A leading edge, top performance cartridge for stereo and discrete four-channel reproduction, the Nagaoka JT-555 offers long playing life and majestic tonal quality. The solid-black carbon cantilever with its very high rigidity and very low effective mass, faithfully transmits the most delicate movements of the stylus tip to the magnet. By combining the solid-black carbon cantilever with the superb Ultra-Ex stylus tip, the frequency response range has been widened to cover everything from the subsonic to the supersonic. Enjoy listening to your records again.

Nagaoka JT-555 Cartridge Specifications
- Type: Stereo moving magnet
- Material: Super permalloy shield, injection mold frame
- Frequency response: 10Hz-28kHz
- Effective mass: 0.6 mg
- Channel balance: 1dB @ 1kHz
- Channel separation @ 1kHz: > 20dB
- Output voltage @ 1kHz: 3.3mV
- Recommended load: 50k ohm
- Stylus: Ultra-Ex
- Stylus replacement: Nagaoka JN-555 expert super
- Cantilever: Solid carbon-black
- Dynamic compliance: 10 x 10 - 6 cm/dyne @ 100 Hz
- Static compliance: 20 x 10 - 6 cm/dyne
- Tracking force: 1.1 - 1.5 g (Optimum 1.3 g)
- Weight: 5.2 g - Size: 15.5 x 27 x 22 mm
- Mounting: JIS EIA (12.7 mm), 1/2 inc mount
- Accessories included: screwdriver, 2 screws and nuts

GRADO GREEN PHONO CARTRIDGE

Ships to US only

Grado cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of cartridges are designed for high output and excellent stability under the most demanding conditions. All of the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height, width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance.

Grado Green Phono Cartridge Specifications
- Type: Moving magnet
- Output voltage: 5mV
- Frequency response: 10Hz-50kHz
- Load impedance: 47k ohms
- Channel separation: 30dB
- Stylus type: Elliptical
- Stylus replacement: User replaceable
- Compliance: 20mm/N
- Tracking force: 1.0 - 2.0 g
- Recommended tracking force: 1.5 g
- Weight: 5.5 g

For stylus replacements, refer to Related Products:
- Standard stylus: Grado Green Stylus
- Downgrade stylus: Grado Black Stylus

AUDIO-TECHNICA VM540ML CARTRIDGE

Audio Technica's VM540ML cartridge improves upon and continues the highly regarded and best-buy rated lineage of the AT440ML series.

It features a MicroLine stylus which enables extremely accurate groove tracking. Distorion is low even on the inner circumference of a record because the curvature radius of the stylus tip does not alter even if the stylus becomes worn. The VM540ML is furnished with a durable low-resonance polymer housing. The VMN40ML MicroLine nude stylus has a multilevel shape for reduced wear on the stylus and individual records.

Audio-Technica VM540ML cartridge specifications
- Type: VM
- Frequency response: 20 ~ 27,000 Hz
- Output voltage: 4.0 mV (1kHz, 5 cm/sec.)
- Channel separation: 30 dB (1kHz)
- Output balance: 1.0 dB (1kHz)
- Tracking force: 1.8 ~ 2.2 g (2.0 g standard)
- Coil impedance: 2.7 kΩ (1kHz)
- DC resistance: 800 Ω
- Load impedance: 47 kΩ
- Load capacitance: 100 ~ 200 pF
- Coil inductance: 460 mH (1kHz)
- Static compliance: 40 × 10-6 cm/dyne
- Dynamic compliance: 10 × 10-6 cm/dyne (100Hz)
- Stylus: Nude Microline (2.2 × 0.12 mil)
- Cantilever: Aluminum tapered pipe
- Vertical tracking angle: 23 °
- Dimensions: 17.3(H) × 17.0(W) × 28.2(D) mm
- Weight: 6.4 g
- Replacment stylus: VMN40ML
- Accessories: Cartridge installtion screws 5mm × 2, 10 mm × 2, Washer × 2, Hexagon nut × 2, Non-magnetic screwdriver × 1, Brush × 1, Lead wire set × 1

Note: Specifications are subject to change without notice.

AUDIO-TECHNICA AT-33EV AT 33EV AT33EV PHONO CARTRIDGE

The Audio-Technica AT33EV cartridge super cedes the AT33ANV, a limited edition and highly rated model launched in 2006 to mark Audio-Technica's 45th anniversary. The Audio-Technica AT33EV cartridge is thoughtfully and thoroughly designed, meticulously and exquisitely crafted so that each component part enhances the cartridge's ability to reproduce signal from the record grooves accurately, perfectly as technologically possible. It is a perfectionist's cartridge.

"It brought out more of what's embedded in the grooves of my LPs than any MC in its price range."¹

Features
- Resonance damping design reduces the minutest unnecessary vibration
- Hardened duralumin tapered pipe cantilever to reproduce natural sound without distortion
- High quality nude elliptical stylus that traces the grooves and reproduces with opulence
- 10 ohms middle impedance specification to minimize signal loss due to the coil's electrical resistance
- PCOCC6N coil enables purer transmission because it is not subject to grain boundaries in the direction of transmission
- Neodymium magnet with dramatically enhanced and concentrated magnetic energy
- Coil stabilizing VC mold that affixes the coil minimizes unnecessary noise and parasitic resonance and thus enhances treble sound quality
- Internal housing anti-vibration damping material, Hanenite, suppresses unwanted vibration and allows outstanding performance of the dual moving coils to fully express itself
- Brass installation screw used to match the cartridge's high quality sound

Audio-Technica AT33EV Cartridge Specifications
- Type: MC type
- Frequency range: 15Hz-50kHz
- Output voltage @ 1kHz,3.54cm/sec: 0.3mV
- Channel separation @ 1kHz: 30dB
- Output balance @ 1kHz: 0.5dB
- Stylus pressure: 1.8-2.2g (2.0g standard)
- Coil impedance: 10 ohms (1kHz)
- Direct current resistance: 10 ohms
- Recommended load resistance: 100 ohms or more (w/ head amplifier connected)
- Coil inductance: 22 mu H (1kHz)
- Static compliance: 4010 - 6 cm/dyne
- Dynamic compliance : 1010 - 6 cm/dyne (100Hz)
- Stylus tip: 0.3 x 0.7 mil nude elliptical
- Cantilever: Duralumin tapered pipe
- Vertical tracking angle: 23
- Dimensions (mm): H16 x W16.6 x L6.5
- Weight: 6.9 g

Accessories
- Non-magnetic body screwdriver x 1
- Stylus Protector x 1
- Cartridge installation screws & nuts - 13 mm x 2, 19 mm x 2, nut x 2, washer x 2
- Stylus brush x 1

AUDIO-TECHNICA AT100E CARTRIDGE

The half-inch standard mount Audio-Technica AT100E is a finely crafted phono cartridge. It features a structure that improves performance of the vibration system, allowing the stylus perfect contact to the record surface. Additionally, it adopts a lossless Paratoroidal generator coil system to their cartridge bodies that results in peak generating efficiency. Stacking two cores makes further improvements to high frequency characteristics by separating the right-and-left channels from the center shield plate, resulting in reduced electrical cross talk. The VM type AT100-series' dual magnet vibration and generation systems have been highly praised all over the world and have become a long-selling series.

Its use of PCOCC coil enables purer signal because it is not subject to grain boundaries in the direction of transmission.

Audio Technica AT100E Phono Cartridge Details
- Output voltage: 4.5mV
- Frequency response: 20Hz-20kHz
- Channel balance @ 1kHz: 1.5dB
- Channel separation @ 1kHz: 27dB
- Tracking force: 1.0 - 1.8 g (1.4 g standard)
- Coil impedance: 2.3 Ω
- DC Resistance: 800 Ω
- Recommended load impedance: 47 kΩ
- Load capacitance: 100 - 200 pF
- Coil inductance @ 1kHz: 350 mH
- Static compliance: 35 x 10(-6) cm/dyne
- Dynamic compliance: 8 x 10(-6) cm/dyne
- Stylus shape: Jointed 0.3 x 0.7 mil Elliptical diamond
- Cantilever: Aluminum pipe
- Vertical tracking angle: 23°
- Weight: 6.5g
- Accessories included: Non-magnetic Screwdriver, cartridge installation tools washers, screws, nuts, stylus brush.

ADC K8C CARTRIDGE WITH HALF-INCH MOUNT BLACK HEADSHELL RC398-DP

ADC K8 Cartridge Specification
- Frequency Response: 15hz-20khz
- Channel Separation: 24 (dB at 1 kHz/10 jHz)
- Vertical tracking force (grams): 1.0-2.0
- Recommended load impedance (ohms): 47k
- Output: 5 mv

THE VESSEL A3SE CARTRIDGE
Rated by Stereophile as Class B — in the same firmament as the Audio-Technica ART20 ($3,199), Benz Micro SLR Gullwing ($4,200); Dynavextor DV-20X2L ($1,250), Hana Umami Blue ($2,500), Lyra Delos ($2,495), Ortofon Cadenza Bronze ($2,599) and other celestial high-end cartridge brands and models.

"The entry-level version of The Vessel costs a bit more than the competition, but it offers a more refined sound profile. It’s the best bonded elliptical cartridge I’ve ever heard."
- Tom Fine, "LP Gear Vessel Moving Magnet Cartridge System", Stereophile, December, 2025.

"The Vessel A3SE cartridge is an absolute world-beater at $99. To say I was wowed is a huge understatement, and I very clearly preferred The Vessel A3SE to a lot of $400 cartridges I have tried before. The presentation is slightly forward in perspective, with sound that is silky-smooth, rich, clean, precise and detailed, with beautiful tonality from deepest bass to highest treble. The superlatives just flow when describing it, just as beautiful music flows from this exceptional cartridge." - Don Lindich, Sound Advice Q&A Newspaper Column"¹

"Experiencing the Vessel A3SE and its performance at the price is probably the most shocking experience I have had in 15 years of reviewing audio. There is a complete line of The Vessel cartridges and they can also be upgraded by changing the stylus, so it can grow with you when you upgrade to a new turntable. Given how great the A3SE sounds, I can only imagine what the more expensive models are like!"²

"Once again, I don't stop listening to my dear old vinyls (and I've got many 100s). The quality of sound with this cartridge is UNSURMOUNTED! (That is not English, is it?). Anyway, you catch my drift. I am 62 and have been through more than a few record players in my life, but this is "unheard of" (sorry for the silly pun). In short: WOW!"³

The Vessel A3SE is a wonderfully disruptive cartridge. Its generous, organic and natural Full Spectra Sound complements any type of music on your list. ⁴ The beautiful, natural tonal balance, richly harmonic presentation and spatial resolution convey sentience the energy beyond hearing, beyond listening hiding in the grooves of your vinyl. It's more than just the sound, The Vessel cartridge communicates the emotional content in the groove. You'll hear it, you'll feel it and experience it. The A3SE features a beautifully-made Super Elliptical diamond and uprated parts and materials handcrafted in Japan. Upgrading is as simple as swapping the stylus.

The Vessel A3SE Cartridge Specifications
- Type: Moving Magnet
- Frequency range: 20-25,000 Hz
- Output voltage @ 1kHz: 3.0 mV
- Channel balance @ 1kHz: <1.5dB
- Channel separation @ 1kHz: 22dB
- Dynamic compliance (100Hz): 8 10^-6 cm/dyne
- Tracking ability at 2.0g : 60 m
- Cantilever: Special type aluminum pipe
- Stylus type: Super elliptical
- Stylus tip radius: 7.6m 15.5m
- Tracking force: 2.0 g
- Internal impedance @ 1kHz: 670 ohms
- Internal inductance: 285 mH
- Recommended load resistance: 47 kOhm
- Cartridge color, body/stylus: Black/Gold/Sky Blue
- Weight: 6.0 g
- Mounting hardware included: 2 Screws, 2 Nuts
- Stylus replacement: A3SE stylus

 

____________________________________

Footnote 1: Don Lindich, "Sound Advice Q&A Newspaper Column", Sound Advice, February 3, 2017.
Footnote 2: Ibid.
Footnote 3: Customer e-mail Feb 12, 2017.
Footnote 4: A high resolution system is needed to experience the Full Spectra Sound and sentience of the A3SE. LP Tunes Music listening equipment: Graham Slee Reflex M phono preamp, Graham Slee Accession phono preamp, Graham Slee Elevator EXP headamp, Denon AU-300LC Step-up transformer, Graham Slee Proprius mono amps, Quicksilver Silver 88 mono amps, Odyssey Kismet stereo amp, Roadrunner Digital Turntable Tachometer, Sota Sapphire turntable, Pioneer PL-12D turntable, Audience SE Phono Cable, Audience Ohno speaker cables, Rogers LS3/5A speakers, Audience ClairAudient 1+1 Loudspeakers, Krell LAT 2 speakers, Yamaha NS1000M speakers, LP Tunes CF3600LE cartridge, Ortofon 2M Red cartridge, Ortofon 2M Blue cartridge, Ortofon 2M Bronze cartridge, Ortofon 2M Black cartridge, Rega Carbon, Supex SD 901 Super cartridge, Denon DL-103 cartridge, Denon DL-110 cartridge, Grace F-9E cartridge.

LP Tunes Nagaoka MP110 Pre-mount

This LP Tunes Pre-mount consists of an Nagaoka MP110 cartridge mounted onto a world-class HD headshell for your convenience.

• LP Tunes High-Definition inch mount headshell
• Aerospace alloy for tensile strength and low resonance
• SOAR HD5 headshell wires for exceptional sound quality
• Aligned length ~52 mm for use with many tonearms
• Alignment adjustable for extra precision and compatibility
• Free alignment protractor
• 16.7g weight with mounted Nagaoka MP110 cartridge

DENON DL-110 DL 110 DL110 PHONO CARTRIDGE

The Denon DL-110 phono cartridge was designed to enable more people to enjoy the exquisite sound quality of moving coil (MC) phono cartridges. Developed using Denon's state of the art MC cartridge manufacturing know-how, the Denon DL-110 is a moving coil cartridge capable of producing a high output of 1.6mV which is equivalent to the output of moving magnet (MM) phono cartridges. The Denon DL-110 phono cartridge can thus be directly connected the MM phono input of your amplifier or receiver without the need for a step-up transformer, head amplifier or pre-preamp.

State-of-the-art technology has been employed in the minute sections of the Denon DL-110 phono cartridge such as the traditional cross-shape armature, dual-construction cantilever and the vibration-center one point support method using suspension wires. This enables balanced characteristics and excellent sound quality comparable to higher priced cartridges.

With the Denon DL-110 original vibrating section and its two-way damping method, sound quality fluctuations due to temperature differences are kept to a minimum. In addition, the overall weight has been reduced by simplifying the magnetic circuit thus improving the tracing ability of the stylus against record warps.

The Denon DL-110 phono cartridge uses a special elliptical stylus with a rectangular cross section of 0.1 x 0.2 mm. It reaches deep into the record groove to extract detail while bypassing groove wall beaten and shorn by age, misuse and misalignment. You'll probably be surprised by how quiet your LPs sound.

Proper setup is very important with the Denon DL-110 phono cartridge. Take the time to get it right and you'll be rewarded with its naturally sweet tonal balance, ambiance, quick transient response, and exquisite articulation. If you've been wondering why many have been captivated by moving coils, the Denon DL-110 will offer you many positive reasons why.

Denon DL-110 Phono Cartridge Specifications
- Type: Moving coil
- Output voltage: 1.6mV
- Frequency response: 20Hz-45kHz
- Recommended load impedance: over 47k ohms
- Channel balance @ 1kHz: Within 1db
- Channel separation @ 1kHz: > 25dB
- Stylus tip: Special elliptical solid diamond with 0.1 x 0.2 mm rectangular cross section
- Compliance: 8 x 10-6 cm/dyne
- Recommended tracking force: 1.8mN +/- 3mN (1.8g +/- 0.3g)
- Color: Red
- Weight: 4.8 g

Reviews
Positive Feedback Issue 15
Audiogon Forum
AudioReview Forums

"The DL-110 is the best budget cartridge I have yet heard after a couple years of trying a handful of budget carts."
- DK

DENON DL-160 DL 160 DL160 PHONO CARTRIDGE
- Discontinued, see Related Products for replacement.

Developed using Denon's state of the art moving coil manufacturing facility and know-how, the Denon DL-160 phono cartridge was designed to enable more people to enjoy the exquisite sound quality of Denon's low-output moving coil cartridges. To that end, the Denon DL-160 is a moving coil cartridge capable of producing a high output of 1.6mV which is equivalent to the output of moving magnet (MM) phono cartridges. The Denon DL-160 phono cartridge can thus be directly connected the MM phono input of your amplifier or receiver without the need for a step-up transformer, head amplifier or pre-preamp.

The moving coil cartridge provides a more sensitive transition from the physical record grooves to an electrical signal. By using a tapered cantilever design, the Denon DL-160 phono cartridge ensures a smooth accurate response while reducing the total tracking weight. Its elliptical stylus is designed for optimal performance, creating a vibrant sound stage and extremely realistic nuance. The Denon DL-160 phono cartridge will provide its fastidious owner with many precious listening hours of tracking and replaying your favorite music.

Denon DL-160 Phono Cartridge Specifications
- Type: Moving coil
- Output voltage: 1.6mV
- Frequency response: 20Hz-50kHz
- Recommended load impedance: over 47k ohms
- Channel balance @ 1kHz: Within 1db
- Channel separation @ 1kHz: > 25dB
- Stylus tip: 0.07 x 0.14mm special elliptical solid diamond
- Compliance: 10 x 10-6 cm/dyne
- Recommended tracking force: 1.6g +/- 0.3g
- Color: Blue swirl
- Weight: 4.8 g

Reviews
http://forum.audiogon.com/cgi-bin/frr.pl?ranlg&1031089600&read&d7&zzlFerrari&&
http://www.audioreview.com/cat/analog-sources/cartridges/denon/PRD_337122_5823crx.aspx

"BTW, the Denon 160 high output moving coil cartridge has surpassed my expectations. It out performs anything I've owned in the past, including Grado and Ortofon moving iron/magnets.Thanks again." - DH, Ocean View, DE, USA

SANSUI SV-101 SV 101 SV101 CARTRIDGE - LATEST REPLACEMENT

The Sansui SV-101 cartridge was discontinued decades ago and is no longer available. It was made by Audio-Technica for Sansui as a private label. As latest replacement of the SV-101 cartridge, we offer the Audio-Technica AT70 cartridge which is what you will receive when you order this item. It is the same exact cartridge with stylus sans the drop down stylus guard.

For replacement styli see Relate Products.

AUDIO-TECHNICA AT-MONO3/LP AT MONO3/LP ATMONO3/LP CARTRIDGE - MC MONO
- True mono cartridge for true mono fidelity

Mono True Cartridge
The AT-MONO3/LP is a true mono cartridge - one of a select few in the world! A true mono cartridge is designed, wired and built only to retrieve signals from the record grooves in the horizontal plane. The groove of a monaural recording is modulated only in the horizontal plane. Stereo recordings, on the other hand, are cut into the vinyl at a forty-five degree angle with a separate channel of information on each of the grove walls, thus requiring the stylus to pick up signals in both the horizontal and vertical plane. As a stereo cartridge sums the channels internally, it picks up noise from the vertical plane of the record grooves. Interestingly, in a mono record much of the surface noise is in the vertical plane, so avoiding this plane is beneficial. By not even picking up or amplifying this information you eliminate a lot of the noise from mono records that you hear when played back through a stereo cartridge.

High Output Moving Coil Mono Cartridge
The Audio Technica AT-MONO3/LP cartridge a joy to hear. A high output moving coil cartridge of excellent production quality and wound with PCOCC coil for signal purity, it is designed to deliver excellent fidelity and superb clarity when playing monaural (mono) records. With its high output of 1.2mV, it can be used without additional pre-preamplification or a MC transformer in the signal path.

Our listening experience with this fine specimen of monophonic reproduction has been left us with a deeper appreciation and enjoyment of mono recordings. The Audio Technica AT-MONO3/LP capably renders the detail, sound stage, harmonic layering, dynamic contrast, low frequency response and musical verity that seemed lacking or constrained in others. Maybe it's because it's a Moving Coil mono cartridge? It's a distinction that is well-founded - along with its superior design and execution.

Proven in use for many years in Japan, the Audio-Technica AT-MONO3/LP cartridge in now available in the U.S. It brings back the pure joy of discovery and listening pleasure for mono record playing.

Audio-Technica AT-MONO3/LP Cartridge Specifications
- Tonearm mount: 1/2 inch
- Type: Moving coil, mono cartridge
- Frequency response: 20Hz-20kHz
- Output voltage @ 1kHz,5cm/sec: 1.2mV
- Tracking force: 1.25-2.5 g
- Recommended load: 40k - 47k ohms (determine best value by listening)
- Cantilever: Aluminum alloy
- Stylus type: Conical
- Dynamic compliance: 7 x 10-6 cm/dyne
- Static compliance: 20 x 10-6 cm/dyne
- Dimensions (mm): L26.5 x W16.6 x H16
- Weight: 6.8 g
- Accessories included: Screwdriver, screws, washers, nuts, spacer/weight, stylus brush

GRADO BLUE 1 BLUE1 P-MOUNT T4P PHONO CARTRIDGE

Ships to US only

Grado P-mount T4P phono cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of P-mount T4P cartridges are designed for high output and excellent stability under the most demanding conditions. All of the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height, width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance.

Grado Blue 3 P-mount T4P Phono Cartridge Specifications
- Type: Moving magnet
- Output voltage: 5mV
- Frequency response: 10Hz-55kHz
- Load impedance: 47k ohms
- Stylus type: Elliptical
- Stylus replacement: User replaceable
- Compliance: 20mm/N
- Tracking force: 1.0 - 2.0 g
- Recommended tracking force: 1.5 g
- Weight: 5.5 g

For stylus replacements, refer to Related Products:
- Standard stylus: Grado Blue Stylus
- Upgrade stylus: Grado Red Stylus

LP Tunes CARBON FIDELITY CF95SE CARTRIDGE 
- Music that makes you want to listen.™

Listen to the new voice of music. Carbon fiber composites offer 10 times the strength of steel at half the weight. Co-developed and designed with LP Tunes by Audio-Technica's best engineers, the new Carbon Fidelity 95 Spectra Elliptical (CF95SE) cartridge benefits from the latest quality parts and materials technology featuring a super carbon fiber cantilever that respond to the most complex high amplitude attacks and transients as well as the most heavily recorded passages. The updated design, tight specifications, Twin-Flux™ magnets, high-quality moving system fulcrum and radial damping ring allied with a Spectra elliptical diamond tip produce music that makes you want to listen.

Mastered to illuminate in comparison to lofty cartridges beyond the economics of most listeners, the CF95SE touches and endears the more you listen. You won't want to go back to your underperforming or pricey cartridge. You'll hear, feel and sense the music exquisitely rendered — harmonically full-bodied, refractive and refreshingly crystal clean with luminous detail spatially radiating with realness. You'll experience remarkable note clarity, projection and nuanced tonal complexity previously unheard and unappreciated.¹

CF95SE Phono Cartridge Details 
- Type: Moving Magnet VM Dual Magnet Stereo
- Output voltage @ 1kHz,5cm/sec.: 2.5 mV
- Channel balance at 1kHz: 2.0 dB or less
- Channel separation @ 1kHz: 20 dB
- Frequency response: 20Hz-20kHz
- Dynamic compliance (x10-6 cm/dyne): 6.5
- Load resistance: 47k ohms
- Load capacitance: 100 - 200 pF
- Stylus type: 0.3 × 0.7 mil Spectra Elliptical diamond
- Cantilever: Super Fidelity Carbon Fiber²
- Tracking force range: 1.5 - 2.5 g
- Tracking force recommended: 1.8 g (18 mN)
- Coil impedance at 1kHz: 2.8k ohms
- Phase polarity: In-phase, positive polarity 
- Recommended load resistance: 47k ohms
- Recommended break-in duration: 30 hours
- Color: Black, Silver, Indigo, white LP Tunes
- Weight: 5.7g ± 0.5g
- Dimensions (mm): 28.1L × 12.7W × 17.2H
- Accessories included: Brass screws × 2, and nuts × 2
- Stylus replacement: LP Tunes CFN95SE stylus

____________________________________ 
Footnote 1: A high resolution system allows full experience of the nuanced tonal complexity offered by the Carbon Fidelity CF95SE. 
Footnote 2: Carbon fiber composites offer 10 times the strength of steel at half the weight. Each producer's carbon fiber differs from those of its competitors, and the processing details are considered to be intellectual property. The special carbon fiber used in the Carbon Fidelity cartridges and styli is patiently and expertly considered for its signature characteristics to bring out the subtleties and finesse of music extracted from the grooves of records and LPs. For carbon fiber info see: "The making of carbon fiber".

AUDIO-TECHNICA AT-92ECD CARTRIDGE - UNIVERSAL MOUNT

From the manufacturer: This .3 x .7 elliptical cartridge fits both Half-inch and P-Mount turntables. The AT-92E employs a special elliptical stylus with a smaller contact radius. This allows the cartridge to reproduce the highest frequencies with lower distortion for cleaner, more lifelike sound.

Audio-Technica AT-92ECD Cartridge Specifications
Frequency Response: 15-27,000 Hz
Channel Separation: 29/18 (dB at 1kHz/10 kHz
Vertical Tracking Force: 1.0-1.5 grams
Stylus Construction: Bonded round shank
Recommended Load Impedance: 47,000 ohms
Output: 3.5 (mV at 1 kHz, 5 cm/sec)
Channel Balance: 1.25 dB
Stylus Shape: 0.3 x 0.7 mil elliptical
Cantilever: Alloy tube
Mount: Universal