Audio-Technica Phono Cartridges

AUDIO-TECHNICA AT-3482P AT 3482P AT3482P P-MOUNT T4P CARTRIDGE

The Audio-Technica AT3482P phono cartridge is Audio-Technica's versatile entry-level cartridge for P-mount T4P turntables. It easily surpasses original equipment and generic cartridges in delivering sheer musical enjoyment.

Audio Technica AT3482P Phono Cartridge Specifications
- Output voltage: 5mV
- Frequency response: 20Hz-20kHz
- Channel balance: 1.5dB
- Channel separation @ 1kHz/10kHz: 24/15dB
- Stylus type: Conical
- Stylus construction: Bonded round shank
- Cantilever construction: Carbon fiber

VM540ML AUDIO-TECHNICA CREPLACEMENT FOR AUDIO-TECHNICA (AT-440MLA AT 440MLA) AT440MLA CARTRIDGE
- AT440's Provenance of Excellence: 2013, 2014, 2015, 2016, 2017, 2018 Editors Choice Award The Absolute Sound March Issue 231, 241, 251, 261, 271, 281.

With the formidable VM540ML phono cartridge, Audio-Technica has replaced and superseded—at a more affordable price—the highly regarded AT440's (retail: $390.00) musical excellence that rightfully should be compared with moving magnets costing up to $500. Yes, it is that good. The Audio-Technica VM5440ML's excellence lies in the suitable employment of advanced designs uniquely available to Audio-Technica because of its rich technical history and production capabilities:

 

● Audio-Technica's Vector-Aligned Dual Magnet design, which uses two tiny magnets to achieve ideal geometry and low magnet mass, for excellent channel separation and extended frequency response.

● The Audio-Technica VMN40ML's MicroLine stylus produces more accurately rendered high frequency response with less wear and distortion than elliptical or conventional linear contact styli. The small curving rate of the MicroLine stylus enables it to track and playback the inner part of the record groove that other styli can hardly maintain. Also the curving rate of the MicroLine stylus does not change until the stylus is almost worn unlike that of conventional styli which increases as they are used. Accordingly, the MicroLine stylus has a much longer average playing life. It plays better, longer.

Audio-Technica AT440MLa Phono Cartridge Specifications
- Output voltage @ 1kHz,5cm/sec.: 4mV
- Dynamic compliance (x10-6 cm/dyne): 10
- Static compliance (x10-6 cm/dyne): 40
- Stylus type: 0.12 mil nude square micro-linear
- Tracking force range: 1.0 - 1.8 g
- Tracking force recommended: 1.4 g (14 mN)
- Vertical tracking angle: 20°
- Coil impedance @ 1kHz: 3.2k ohm
- Coil inductance @ 1kHz: 490 mH
- Recommended load resistance: 47k ohms
- Color: Black/Violet
- Weight: 6.5 g
- Dimensions (mm): H17.3 × W16 × D28.2
- Stylus replacement: Audio-Technica ATN440MLA
- Accessories included: Screwdriver, screws, nuts, headshell wires

 

Audio-Technica VM540ML cartridge specifications
- Type: VM
- Frequency response: 20 ~ 27,000 Hz
- Output voltage: 4.0 mV (1kHz, 5 cm/sec.)
- Channel separation: 30 dB (1kHz)
- Output balance: 1.0 dB (1kHz)
- Tracking force: 1.8 ~ 2.2 g (2.0 g standard)
- Coil impedance: 2.7 kΩ (1kHz)
- DC resistance: 800 Ω
- Load impedance: 47 kΩ
- Load capacitance: 100 ~ 200 pF
- Coil inductance: 460 mH (1kHz)
- Static compliance: 40 × 10-6 cm/dyne
- Dynamic compliance: 10 × 10-6 cm/dyne (100Hz)
- Stylus: Nude Microline (2.2 × 0.12 mil)
- Cantilever: Aluminum tapered pipe
- Vertical tracking angle: 23 °
- Dimensions: 17.3(H) × 17.0(W) × 28.2(D) mm
- Weight: 6.4 g
- Replacement stylus: VMN40ML
- Accessories: Cartridge installation screws 5mm × 2, 10 mm × 2, Washer × 2, Hexagon nut × 2, Non-magnetic screwdriver × 1, Brush × 1, Lead wire set × 1

Note: Specifications are subject to change without notice.

______________________________________

AUDIO-TECHNICA AT-95E AT 95E AT95E PHONO CARTRIDGE

Imported and packaged by LP Tunes, the Audio-Technica AT95E phono cartridge has a very distinguished and colorful lineage. On its own, it has been a multiple recipient of Best Buy ratings in the UK. Its lineage is intertwined with the classic and musically acclaimed Linn Basik, K5 and K9 phono cartridges. Unlike these cartridges however, the AT95E is delightfully affordable and available. Since October, 2004 and up to the present, the Audio-Technica AT95E phono cartridge is included in the Stereophile Recommended Components List. It is the only inexpensive phono cartridge to be included in this highly selective recommended list! The review summarized the performance of the Audio-Technica AT95E phono cartridge with the following words: "Makes music for 50 bucks!"

Paul Szabady in Stereotimes March 2007 had this to say about the Audio-Technica AT95E phono cartridge:

"The AT95E integrates the range of the sonic bandwidth very well: no part of the spectrum sticks out at the listener. It doesnt sound bright and it doesnt sound dull at the top frequencies. Midrange is clear and detailed with no spittiness on vocals, though really cheap and inadequate analog match-ups will cause an slight upper mid-range burr."

The half-inch standard mount and dual-magnet Audio-Technica AT95E cartridge sounds clear, dynamic and richly balanced. It allows music lovers to use limited means to upgrade their turntables and thus attain a higher level of discernment and listening pleasure without the financial burden typically associated with high end cartridges. Yes it is vibrant, dynamic and rich in detail as reviewers and users say, and some users may no longer wish to upgrade further. The Audio-Technica AT95E phono cartridge has been consistently rated a "Best Buy" in the UK and we agree wholeheartedly.

Audio-Technica AT95E Phono Cartridge Details
- Output voltage @ 1kHz,5cm/sec.: 3.5mV
- Channel balance: 2dB
- Channel separation @ 1kHz: 20dB
- Frequency response: 20Hz-20kHz
- Dynamic compliance (x10-6 cm/dyne): 6.5
- Static compliance (x10-6 cm/dyne): 20
- Load resistance: 47k ohms
- Load capacitance: 100 - 200 pF
- Stylus type: 0.4 x 0.7 mil elliptical diamond
- Tracking force range: 1.5 - 2.5 g
- Tracking force recommended: 2 g (20 mN)
- Vertical tracking angle: 20
- Coil impedance at 1kHz: 2.8k ohms
- Coil inductance at 1kHz: 400 mH
- Recommended load resistance: 47k ohms
- Color: Black/Green
- Weight: 6.5 g
- Dimensions: 30.5l x 17w x 17.20h
- Stylus replacement: Audio-Technica ATN95E

Note: Details are subject to change without notice.

 

Awards
Stereophile Recommended Component: 2004, 2005, 2006, 2010, 2011, 2012, 2013, 2014, 2015.

AUDIO-TECHNICA AT-OC9ML/II AT OC9ML/II ATOC9ML/II PHONO CARTRIDGE
-Musical excellence with a great balance of dynamics, natural harmonics and detail retrieval.

One of the finest cartridges ever made for the money and still in current US production, the Audio-Technica AT-OC9ML/II phono cartridge is also one of the most desirable cartridges in the world. Its musical excellence defies competition and transcends time. Its timeless quality of musical eloquence and over achievement make it a classic to be cherished and enjoyed for years and decades. It is also reliable and superbly crafted. That's why it received the Soundstage Award for Exceptional Value. To summarize its performance one review stated:

" The AT-OC9ML/II sets a standard that will be hard for any cartridge, moving magnet or moving coil, to match at its price."

At LP TUNES's special sale price which is less than half of retail it is an absolute steal! It is manufactured extremely well and is very reliable. Its performance is both world class and top class.

The Audio-Technica AT-OC9ML/II is a significant achievement in precision manufacturing with tolerances held to mere thousands of an inch. Stringent quality control assures that these tolerances, as well as performance criteria, are maintained by every Audio-Technica AT-OC9ML/II phono cartridge.

The Audio-Technica AT-OC9ML/II phono cartridge is the second generation of the highly acclaimed model. A brand new design with a gold-plated boron cantilever and MicroLine diamond tip, the Audio-Technica AT-OC9ML/II has received many accolades from music listeners and audiophiles. Moving coil cartridges are preferred by many serious audiophiles, citing clarity and transparency of tone, better defined transients, precise stereo imaging and lower distortion as reasons for their preference.

Audio-Technica AT-OC9ML/II Phono Cartridge Specifications
- Type: Moving coil
- Output voltage: 0.4mV
- Frequency range: 15Hz - 50kHz
- Recommended load impedance: 20 ohms or higher
- Channel balance @ 1 kHz: <1dB
- Channel separation @ 1kHz/10kHz: 32/21dB
- Stylus shape: Microline
- Stylus construction: Nude square shank
- Cantilever: Gold-plated solid boron
- Wire used for coils: PCOCC
- Dynamic compliance: 9 x 10-6cm/dyne
- Static compliance: 35 x 10-6cm/dyne
- Recommended tracking force: 1.25 - 1.75 g
- Dimensions: 1.01 x 0.66 x 0.68
- Color: Gold/Black
- Weight: 8.09 g
- Mounting: 1/2 inch
- Warranty: 1 year

Please note: Moving coil cartridges require receivers and pre amps with special compatible inputs. Their stylus assemblies are not user-replaceable.

Reviews
Soundstage Reviewers Choice
Audio Asylum 1, 2, 3
High-endaudio.com

AUDIO-TECHNICA AT-7V AT 7V AT7V PHONO CARTRIDGE

○ Square shank nude diamond for exquisite fidelity
○ Offers fluidity, smoothness and innate delicacy
○ Diamond tip r/R radii: 5/18 m (.0002 x .007 inch)
○ Carbon fiber cantilever for firm and sensitive response to grooves
○ PCOCC coil and terminal pins for signal purity

The Audio Technica AT7V phono cartridge is alluringly musical. It faithfully extracts and expresses the recorded musical artistry and complete harmonic sound quality lost in the detail by so many other more expensive cartridges. With independent left and right magnets and PCOCC coil and terminal pins for pure signal transmissions, it offers music listeners and audio enthusiasts a new high in fidelity and sound quality. Proven in use for many years in Japan, the Audio-Technica AT7V cartridge in now available in the US and is imported by LP Tunes. It works wonders in rejuvenating systems with lackluster sound. Rediscover how good your records really sound.

Audio-Technica AT7V Phono Cartridge Specifications
- Tonearm mount: 1/2 inch
- Type: Moving magnet, VM dual-magnet stereo cartridge
- Frequency response: 15Hz-25kHz
- Output voltage @ 1kHz,5cm/sec: 5mV
- Tracking force: 1.75 - 2.25 g (2.0 g standard)
- Load impedance: 47k ohms
- Channel separation @ 1kHz: 27dB
- Channel balance @ 1kHz: >1.5dB
- Dynamic compliance: 7.0 x 10-6 cm/dyne
- Static compliance: 35 x 10-6 cm/dyne
- Vertical tracking angle: 23
- Cantilever: Tapered aluminum alloy
- Stylus: Grain-oriented square shank nude special elliptical diamond with 0.2 x 0.7 mil tracing radii
- Dimensions: 17.3h x 15.2w x 26.5d
- Weight: 6.2 g
- Stylus replacement: Audio-Technica ATN7V (knob color: Indigo)
- Accessories included: Screwdriver, screws, nuts, washers

Reviews & Discussions
- Audiokarma.org

"The AT7V is installed and working very well. It's an excellent cart, much cleaner and more refined than my old Ortofon OM10. Thank you very much!"
- VS (customer from Australia)

AUDIO-TECHNICA AT-120Eb AT 120Eb AT120Eb CARTRIDGE

The AT120Eb moving magnet cartridge features Audio-Technica's Vector-Aligned Dual Magnet design and exclusive Paratoroidal Signal Generator.

● Its high performance and unique Paratoroidal signal generating system is composed of a unified, laminated coil core wound with a single piece of wire. Internal mechanical and electrical connections are eliminated, minimizing magnetic losses and ensuring better signal transfer.

● The PCOCC coil enables pure signal transmission because it does not have grain boundaries in the direction of transmission.

Extraordinarily crafted, the 120Eb phono cartridge provides musical enjoyment far beyond its price range. After about 100 hours of break-in, you'll enjoy its crystalline highs, cohesion, wide sound stage, and tight bass.

Audio Technica AT120EB Phono Cartridge Specifications
- Type: VM type (Dual Magnet) stereo cartridge
- Output voltage: 4.0mV
- Frequency response: 20 ~ 25,000Hz
- Channel balance @ 1kHz: 1.0dB
- Channel separation @ 1kHz/10kHz: 28/20dB
- Tracking Force: 1.0 - 1.8g (1.4g standard)
- Coil Impedance: 3.2 kΩ (1kHz)
- Direct Current Resistance: 800 Ω
- Load Impedance: 47 kΩ
- Coil Inductance: 490 mH (1kHz)
- Load Capacitance: 100 ~ 200pF
- Static Compliance: 35 × 10^-6cm/dyne
- Dynamic Compliance: 10 × 10^-6cm/dyne (100Hz)
- Stylus shape: 0.3 × 0.7 mil Nude Elliptical diamond
- Stylus construction: Nude round shank
- Cantilever: Aluminum pipe
- Vertical Tacking Angle: 20°
- Dimensions: H17.3 × W16 × D28.2 (mm)
- Weight: 6.5g
- Accessories included: Non-magnetic driver × 1, washer × 4, nut × 2, cartridge installation screws 5 mm × 2 and 10 mm × 2, hexagon nut × 2, brush × 1.

AUDIO-TECHNICA AT-70 AT 70 AT70 PHONO CARTRIDGE

The Audio-Technica AT70 phono cartridge fits half-inch and standard mount turntables. It's full body mount is screwed directly on the headshell thus minimizing structural resonances. One of the most popular cartridges in the world, it is used by many turntable manufacturers as their cartridge of choice for original equipment in their higher quality line of turntables. It is often recommended when users want to achieve a higher level of discernment. This cartridge performs well in critical applications such as recording to digital media (CD's), preservation of LP's, and for playing your better records.

Manufactured to world class quality standards, each Audio-Technica AT70 cartridge is hand assembled with tolerances held to mere thousands of an inch. Strict quality control assures that tolerances and performance criteria are maintained for each product. This attention to every micro detail in design, construction and final assembly results in superior phono cartridges that are delightfully musical and exquisite. The Audio-Technica AT70 is time proven by decades of actual use by many thousands of satisfied users.

Audio-Technica AT70 Phono Cartridge Specifications
- Output voltage @ 1kHz,5cm/sec.: 3.5mV
- Frequency response: 20Hz-20kHz
- Channel balance: 1.5dB
- Channel separation @ 1kHz/10kHz: 20/15dB
- Stylus type: Conical
- Stylus construction: Bonded round shank
- Cantilever construction: Alloy tube
- Tracking force range: 1.5-2.5 g
- Cartridge mount: Full body mount designed for full contact installation for minimal resonance

DISCONTINUED - OUT OF STOCK

For alternatives, please refer to:

• LP TUNES T4P SERIES III PHONO CARTRIDGE
• AUDIO-TECHNICA AT-301EP AT 301EP AT301EP PHONO CARTRIDGE
• LP TUNES CARBON FIDELITY CFT4PSE CARTRIDGE

-----------------------------------------------------------------------------------------------------------

AUDIO-TECHNICA STUDIO REFERENCE SERIES 3003 PHONO CARTRIDGE

The 3003 phono cartridge is a model within the highly acclaimed Studio Reference Series representing one of Audio-Technica's finest P-mount T4P and Standard half-inch mountable phono cartridges. The Studio Reference Series are best known for their excellent musicality, outstanding value, high technology and reasonable price.

The Audio-Technica Studio Reference Series 3003 phono cartridge uses a highly polished special elliptical stylus to very accurately extract record groove information with a minimum of wear. Audio-Technica uses a thin-wall alloy tube cantilever (the hollow rod that extends from the cartridge to the diamond tip), for low mass, low resonance and high sensitivity. The Audio-Technica 3003 phono cartridge reproduces a wide, extended frequency response with low distortion. It offers excellent tracking at 1 - 1.5 grams, saving your LPs from undue wear. It fits P-mount or standard half-inch tonearms with the supplied adaptor.

The Studio Reference 3003 cartridge comes complete with installation instructions and mounting hardware for P-mount and half-inch standard tonearms. Originally packaged in a Red carton enclosed plastic case, this latest version was modernized with clamshell sealed packaging for long shelf life and excellent product protection. For excellent musicality, long playing life, and for minimum record wear, choose the Audio-Technica Studio Reference 3003 phono cartridge.
Note: The photo of the specification sheet is provided for reference only and is not included in the latest packaging.

Audio-Technica 3003 Phono Cartridge Specifications
- Output voltage @ 1kHz, 5cm/sec: 5mV
- Channel balance: 1.25dB
- Channel separation @ 1kHz/10kHz: 29/18dB
- Frequency response: 15Hz-27kHz
- Vertical tracking force: 1 - 1.5 g
- Stylus type: .03 x .07 mil bi-radial
- Cantilever construction: Thin-wall tube
- Recommended load resistance: 47k ohms
- Mounting: P-mount with detachable and separate 1/2 inch mount adapter
- Accessories included: Screws and nuts, screwdriver, half-inch mount adapter

AUDIO-TECHNICA 1001 PHONO CARTRIDGE (STUDIO REFERENCE SERIES)

The Audio-Technica 1001 phono cartridge is a model within the Studio Reference Series representing one of Audio-Technica's finest P-mount T4P and Standard Half-inch mountable phono cartridges. The Studio Reference Series are best known for their excellent musicality, outstanding value, high technology and reasonable price.

The Audio-Technica 1001 phono cartridge uses a highly polished conical stylus to extract record groove information with precision and with a minimum of wear. Audio-Technica uses a thin wall metal alloy tube cantilever (the hollow rod that extends from the cartridge to the diamond tip), for low mass and low resonance. The Audio-Technica 1001 phono cartridge reproduces a wide frequency response with low distortion. It offers excellent tracking at 1 - 1.5 grams, saving your LPs from undue wear. It fits P-mount or standard half-inch tonearms with the supplied adapter.

The Audio-Technica 1001 phono cartridge comes complete with installation instructions and mounting hardware for P-mount and half-inch standard tonearms.

For musicality, long playing life, and for minimum record wear, choose the Audio-Technica 1001 Studio Reference phono cartridge.

Audio-Technica 1001 Phono Cartridge Specifications
- Output voltage @ 1kHz, 5cm/sec: 5mV
- Channel balance: 1.25dB
- Channel separation @ 1kHz/10kHz: 26/16dB
- Frequency response: 20 - 22,000 Hz
- Stylus type: 0.6 mil conical
- Cantilever construction: Thin-wall metal alloy tube
- Recommended load resistance: 47k ohms
- Mounting: P-mount with a separate adapter for 1/2 inch mount
- Accessories included: Screws and nuts, screwdriver

AUDIO-TECHNICA AT-150MLX AT 150MLX AT150MLX PHONO CARTRIDGE

The Audio-Technica AT150MLX reproduces subtle details faithfully, clearly, exquisitely. It is superbly accurate and musical. It lifts listening to a new level of articulation and enjoyment. This is really the characteristic that distinguishes the Audio-Technica AT150MLX phono cartridge.

"Everything points to the AT150MLX as the best moving magnet design."

- David A. Rich, The Sensible Sound, Issue 112, May/June 2007

Six technologies are harnessed to produce this extraordinary and highly accurate phono cartridge:
- Vector-Aligned phono cartridge: Patented by Audio-Technica, vector-aligned phono cartridges feature two magnetic generators arranged in the shape of a "V". These two magnets are positioned precisely to match the positions of the right and left channels in the stereo record groove. Major benefits of the Vector-Aligned cartridge include outstanding channel separation, very low distortion and superb tracking performance.

- Boron cantilever: Its tiny, gold plated boron cantilever provides an extremely rigid yet lightweight platform to which the stylus is mounted. The gold plating also acts to dampen the nano resonance that the boron may produce.

- MicroLine Stylus: The stylus used in the Audio-Technica AT150MLX is the latest and most advanced design. More closely resembling the cutter stylus than any previous design, this shape produces better high frequency response with less wear or distortion than with earlier configurations.

- PCOCC wire: A technologically advanced pure copper material is used in Audio-Technica's exclusive Paratoroidal Signal Generator. Together with the laminated core structure, which minimizes loss in the high frequency region, this integrated paratoriodal signal generator achieves an efficiency greater than conventional cartridges. The use of PCOCC wire (Pure Copper by Ohno Continuous Casting) perfects the performance of the advanced paratoroidal coil design. A special high-temperature extrusion die produces copper with virtually no transverse crystal barriers to impede signal transmission or color sound. Even the output terminals are constructed of PCOCC copper. The coils of the Audio-Technica AT150MLX thus transmit distortion-free sound up to its output posts. The most subtle details are reproduced with clarity and purity.

- Mu-metal shielding: A mu-metal shielding plate between the left and right channels in the generator system assure that the high level of channel separation achieved is preserved at the cartridge output.

- Anti-resonance ceramic mounting base: To further increase the accuracy of the AT150MLX's moving system, Audio-Technica engineers have ensured against unwanted parasitic vibration with an anti-resonance ceramic mounting base.

Audio-Technica AT150MLX Phono Cartridge Specifications
- Tonearm mount: 1/2 inch
- Type: Moving magnet
- Output voltage: 4mV
- Frequency response: 10Hz-30kHz
- Load impedance: 47k ohms
- Channel separation @ 1kHz/10kHz: 30/20dB
- Channel balance: 0.8dB
- Stylus construction: Nude square shank
- Stylus type: Microline
- Cantilever: Gold-plated boron
- Tracking force: 0.75-1.75 g
- Dynamic compliance (x 10-6 cm/dyne, 100 Hz): 10.0
- Recommended load capacitance: 100-200 pF
- Coil wiring: PCOCC
- Weight: 8.3 g
- Accessories included: User guide, mounting hardware
- Stylus replacement: Audio-Technica ATN150MLX
- Warranty: 1 year

Reviews & Resources
Audio-Technica AT150MLX Review - The Sensible Sound
Audio-Technica AT150MLX Owners Manual

AUDIO-TECHNICA CN-5625AL CN 5625AL CN5625AL PHONO CARTRIDGE

The half-inch standard mount Audio-Technica CN5625AL phono cartridge is a solid performer and a step above the ordinary entry-level cartridge. Manufactured to Audio-Technica's world class quality standards, it renders music smoothly, dynamically and cleanly. You'll discover the joy of listening to LPs.

Audio Technica CN5625AL Phono Cartridge Specifications
- Output voltage: 5.3mV
- Frequency response: 20Hz-20kHz
- Channel balance: 1.5dB
- Channel separation: 24/15 (dB at 1kHz/10kHz)
- Stylus type: Conical
- Stylus construction: Bonded round shank
- Cantilever construction: Alloy tube

AUDIO-TECHNICA AT-311EP AT 311EP AT311EP PHONO CARTRIDGE

The Audio-Technica AT311EP phono cartridge offers P-mount T4P convenience, superb performance and high accuracy. It is one of the top P-mount cartridges available from Audio-Technica and a favorite by those who value sound quality and who know how to listen well. Furthermore, since the Audio-Technica AT311EP phono cartridge uses a very high quality elliptical stylus that is housed in an industry standard holder, you have assured availability of stylus replacements for many, many years.

Audio-Technica AT311EP Phono Cartridge Specifications
- Output voltage @ 1kHz,5cm/sec: 5mV
- Channel balance: 1.25dB
- Channel separation @ 1kHz/10kHz: 26/18dB
- Frequency response: 15Hz-27kHz
- Tracking force: 1 - 1.5 g
- Stylus type: .03 x .07 mil elliptical
- Cantilever construction: Thin-wall tube
- Recommended load resistance: 47k ohms
- Color: Black/White
- Mounting: P-mount with a separate adapter for 1/2 inch mount

AUDIO-TECHNICA AT-71E AT 71E AT71E PHONO CARTRIDGE

The half-inch standard mount Audio-Technica AT-71E cartridge sounds rich and crystal clean. It is manufactured to Audio-Technica's world-class quality standards, the Audio-Technica AT-71E cartridge performs tirelessly with speed, delicacy and extension.

Audio-Technica AT-71E Phono Cartridge Specifications
- Output voltage @ 1kHz,5cm/sec.: 3.5mV
- Frequency response: 20Hz-22kHz
- Channel balance: 1.5dB
- Channel separation @ 1kHz/10kHz: 22/15dB
- Stylus type: 0.4 x 0.7 mil elliptical
- Stylus construction: Bonded round shank
- Tracking force range: 1.5-2 g
- Cantilever: Alloy tube

AUDIO-TECHNICA AT-3600 AT 3600 AT3600 INDUSTRY STANDARD PHONO CARTRIDGE

The Audio-Technica AT3600 is probably the most ubiquitous cartridge in the world. Yet it is relatively unknown by its real model name. Why? Because it is private labeled. It is used by many turntable name brands as their cartridge of choice for a pre-installed cartridge. It's no wonder. The Audio Technica AT3600 has been time tested and proven by decades of actual use for quality, durability, cost-effectiveness and fine sound.

Audio Technica AT3600 Phono Cartridge Specifications
- Output voltage: 5.3mV
- Frequency response: 20Hz-20kHz
- Channel balance: 1.5dB
- Channel separation @ 1kHz/10kHz: 24/15dB
- Stylus type: Conical
- Stylus construction: Bonded round shank

AUDIO-TECHNICA AT-110E AT 110E AT110E PHONO CARTRIDGE

The Audio-Technica AT110E is a cartridge that captures and conveys the sound and emotion of music that most of its peers overlook. The Audio-Technica AT110E has been around for decades without revision for a very good reason - and that should tell you something about its enduring musicality. Manufactured to Audio-Technica's world class quality standards, each cartridge is completely hand assembled with tolerances held to just thousands of an inch.

The Audio-Technica AT110E phono cartridge LC-OFC Improved delivers a wide sound stage, rich full, natural tone, tight bass, vibrant performance, more musical detail and nuance at a best buy price. It sounds so good and so affordable, a rare combination in high end audio.

Please note: The Audio-Technica AT110E LC-OFC requires about 50-100 hours of actual playing time before it will deliver its musical excellence.

Audio Technica AT110E Phono Cartridge Specifications
- Type: Moving magnet
- Output voltage: 4.5mV
- Frequency response: 20Hz-22kHz
- Load impedance: 47k ohms
- Channel separation @ 1kHz: 26/17dB
- Channel balance @ 1kHz: 1.5dB
- Stylus tip: 0.4 x 0.7 mil elliptical
- Stylus construction: Bonded
- Cantilever construction: Thin-wall tube
- Tracking force: 1-2 g
- Weight: 7.2g
- Stylus replacement: Audio-Technica ATN110E

Reviews & Feedback
A customer's quote: "I must say, the sound quality is SUPERB! The cartridge seems to filter out any scratching noises! How does it do that?..."

Positive Feedback
In Audio Asylum by star man