The new LP TUNES is live as a pre-release. Product options are presented on a single page so you can make the best purchase decision.

Audio-Technica VM510CB cartridge

AUDIO-TECHNICA VM510CB CARTRIDGE

The VM510CB conical stylus cartridge is the entry-level 500 Series model in Audio-Technica's new VM cartridge line a line that harks back to A-T's early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today's advanced technology. Like all VM cartridges, the VM510CB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge's 0.6 mil conical bonded stylus tracks the center of the record groove for reliable performance and excellent fidelity.

Audio-Technica VM510CB cartridge specifications
- Type: VM
- Frequency response: 20 ~ 20,000 Hz
- Output voltage: 5.0 mV (1kHz, 5 cm/sec.)
- Channel separation: 25 dB (1kHz)
- Output balance: 1.5 dB (1kHz)
- Tracking force: 1.8 ~ 2.2 g (2.0 g standard)
- Coil impedance: 2.7 kΩ (1kHz)
- DC resistance: 800 ΩΩ
- Load impedance: 47 kΩ
- Load capacitance: 100 ~ 200 pF
- Coil inductance: 460 mH (1kHz)
- Static compliance: 35 10-6 cm/dyne
- Dynamic compliance: 8 10-6 cm/dyne (100Hz)
- Stylus: Bonded conical (0.6 mil)
- Cantilever: Aluminum pipe
- Vertical tracking angle: 23
- Dimensions: 17.3(H) 17.0(W) 28.2(D) mm
- Weight: 6.4 g
- Replacment stylus: VMN10CB
- Accessories: Cartridge installtion screws 5mm 2, 10 mm 2, Washer 2, Hexagon nut 2

Note: Specifications are subject to change without notice.

Audio-Technica AT-F2 AT F2 ATF2 phono cartridge
AUDIO-TECHNICA AT-F2 AT F2 ATF2 PHONO CARTRIDGE

The new Audio-Technica AT-F2 stereo moving coil cartridge offers unheard of musical achievement and value. It is an excellent example of Audio-Technica's latest leap and advancement in technical expertise, unique technological knowledge, and employment of hybrid materials to engineer MC cartridges of optimal and world-class performance. In this instance, its high achievement is fulfilled through a balance of material use and technical implementations each contributing to the AT-F2's musical rightness - the reverse V-shaped dual left and right coil design, special elliptical stylus, aluminum pipe cantilever, PCOCC coil, Neodymium magnet, and precision crafted sturdy aluminum base.

Audio-Technica AT-F2 Phono Cartridge Specifications
- Tonearm mount: 1/2 inch
- Type: Moving coil
- Frequency response: 15Hz-30kHz
- Output voltage @ 1kHz,5cm/sec: 0.32mV
- Tracking force: 1.8-2.2 g (2.0 g standard)
- Recommended load impedance: Minimum 100 ohms
- Coil impedance: 12 ohms (1kHz)
- DC resistance: 12 ohms
- Channel separation @ 1kHz: 25dB
- Channel balance @ 1kHz: >1.5dB
- Dynamic compliance: 9.0 x 10-6cm/dyne (100Hz)
- Static compliance: 35 x 10-6cm/dyne
- Stylus: Elliptical 0.3 0.7 mil
- Vertical tracking angle: 23
- Dimensions: 17.3"h x 16.8"w x 25.4"l
- Weight: 5.0 g
- Accessories included: Stylus protector (x 1), nuts (x 2), washers (x 2), cartridge mounting screws 5 mm (x 2), 9 mm (x 2)

Audio-Technica AT-440ML Phono Cartridge - <font color=#009933>Discontinued, see Related Products</font>

AUDIO-TECHNICA AT-440ML PHONO CARTRIDGE

Discontinued, see related products

Original AT-440ML/OCC cartridge, sound quality, extended frequency and performance

Audio-Technica is the world leader in phonograph cartridges. Its cartridges are used by many renowned companies as original installed equipment and under private label. It is one of the last manufacturers to offer a full line of phono cartridge products that meet the needs of many budget segments, turntable/tonearm requirements and performance levels.

Audio-Technica's moving magnet cartridge design is patented and delivers "Practically Identical to the Cutter Head" performance. Instead of using a single, large magnet like other cartridge manufacturers, Audio-Technica's patented Vector-Aligned Dual Magnet design positions two tiny magnets 90 degrees apart. These magnets are positioned directly in line with the two groove walls and each magnet incorporates a separate, independent coil structure. This low magnet mass and geometry allows exact translation of record groove motion into matching electrical signals, ensuring excellent channel seperation, extended frequency response and superior tracking.

Each Audio-Technica cartridge is hand-assembled with tolerances held to mere thousandths of an inch. Stringent quality control assures that tolerances and performance criteria are maintained for each product. This attention to every micro detail in design, construction and final assembly results in superior phono cartridges that are delightfully musical and musically accurate.

With the AT-440ML phono cartridge, Audio-Technica delivers musical excellence in an affordable audiophile cartridge that rightfully should be compared with moving magnets costing many times its price. The Audio-Technica AT-440ML's excellence lies in its advanced technology, design and materials uniquely available to Audio-Technica because of its deep technical history and production capabilities.

Audio-Technica AT-440ML Phono Cartridge Specifications

  • Frequency Response (Hz): 5-32,000
  • Output Voltage: (mV, 1kHz,5cm/sec: 5.0
  • Channel Balance: (dB, 1kHz: 0.75
  • Channel Separation (dB, 1kHz: 30
  • Dynamic Compliance (x10-6 cm/dyne): 10
  • Static Compliance (x10-6 cm/dyne): 40
  • Stylus Type: 0.12 mil nude square Micro-linear
  • Tracking Force Range: 1.0 - 1.8 g
  • Tracking Force Recommended: 1.4 g (14 mN)
  • Vertical Tracking Angle: 20
  • Coil Impedance @ 1kHz: 3.2k ohm
  • Coil Inductance @ 1kHz: 490 mH
  • Recommended Load Resistance: 47k ohms
  • Color: Black/Violet
  • Weight: 6.5 g
  • Dimensions: 17.3l x 16w x 28h
  • Stylus Replacement: Audio-Technica ATN-440ML
  • Accessories Included: Screwdriver, Screws, Nuts, Headshell Wires
5.0
Audio-Technica AT150SA Pre-mount
AUDIO-TECHNICA AT150SA CARTRIDGE PREMOUNT WITH HIGH DEFINITION HEADSHELL
- Audio-Technica AT150Sa cartridge premounted on world class HD Headshell

Audio-Technica AT150Sa with High Definition Headshell (HD) offers sterling sound quality and compatibility with turntables:
- LP Tunes High-Definition half-inch mount headshell
- Aerospace alloy for tensile strength and low resonance
- SOAR HD5 headshell wires for exceptional sound quality
- Aligned length 52 mm for use with many tonearms
- Alignment adjustable for extra precision and compatibility
- Free alignment protractor
- Total weight of 16.0g with Audio-Technica AT150Sa is suited to more turntables and their tonearms. There is no need to change the counterweight.

AT150Sa, AT150MLX, AT150ANV Vignette
The progenitors of the new AT150SA, the AT150MLX and AT150ANV cartridges offer exceptional accuracy and for the AT150ANV - supreme fidelity. Within their celestial universe, the AT150SA with its Nude Shibata stylus also administer delicacy. Graced with a Nude Shibata stylus on a tapered pipe aluminum cantilever, the AT150SA through technical expertise and artisanship lifts from the record grooves sublime music. Music you'll want to keep enjoying.

Audio-Technica AT150SA cartridge specifications
- Type: Moving Magnet VM Dual Magnet Stereo
- Frequency response: 10 ~ 25,000 Hz
- Output voltage: 4.0 mV (1kHz, 5 cm/sec.)
- Channel separation: 30 dB (1kHz)
- Output balance: 1.0 dB (1kHz)
- Tracking force: 1.0 ~ 1.8 g (1.4 g standard)
- Coil impedance: 3.2 kΩ (1kHz)
- DC resistance: 800 Ω
- Rec. load impedance: 47 kΩ
- Coil inductance: 490 mH (1kHz)
- Static compliance: 40 10-6 cm/dyne
- Dynamic compliance: 10 10-6 cm/dyne (100Hz)
- Stylus: Solid Shibata
- Cantilever: Aluminum, taper pipe
- Vertical tracking angle: 23
- Dimensions: 17.3(H) 17.0(W) 28.2(D) mm
- Weight: 8.0 g
- Accessories: Non-magnetic driver 1, non-magnetic mounting screws 5mm 2,8 mm 2, PCOCC lead wires 4, washer 2, nut 2, Brush 1.

Note: Specifications are subject to change without notice.

____________________________________

Music listening equipment: Graham Slee Reflex M phono preamp, Graham Slee Elevator EXP headamp, Denon AU-300LC Step-up transformer, Graham Slee Proprius mono amps, Odsssey Kismet Reference Amp, Quicksilver Silver 88 mono amps, Roadrunner Digital Turntable Tachometer, Sota Sapphire turntable, Audience SE Phono Cable, Audience Ohno speaker cables, Rogers LS3/5A speakers, Audience ClairAudient 1+1 Loudspeakers, Krell LAT 2 speakers, Yamaha NS1000M speakers, LP Tunes CF3600LE cartridge, Ortofon 2M Red cartridge, Ortofon 2M Blue cartridge, Ortofon 2M Bronze cartridge, Ortofon 2M Black cartridge, Rega Carbon cartridge, Supex SD 901 Super cartridge, Denon DL-103 cartridge, Denon DL-110 cartridge, Grace F-9E cartridge.