LP Tunes Stylus for Denon MTP-702 Turntable

NSS/c LP TUNES UPGRADE REPLACEMENT FOR AUDIO-TECHNICA ATS10 STYLUS

The Nude Schwarz stylus (NSS) raises the bar in stylus performance. For over half a century, the traditional way to craft a stylus, which carries on still today, is to bond the stylus tip to a crown (metal shank) that in turn is bonded to the cantilever. The additional mass, and a different material element in between the diamond tip and cantilever, cause some loss of nuance in transmitting groove modulation from the tip to the cantilever. With the Schwarz edition, a nude diamond stylus (a whole diamond) is inserted, fastened and/or glued directly to the cantilever - banishing the need for the crown (metal shank).

Thus, you can hear higher fidelity and exhilarating sound quality in every NSS stylus that you install in your cartridge! The unencumbered polycrystalline diamond tip (for toughness and longer-playing life) directly traces the grooves for optimal retrieval of record groove modulation.

Stylus color and/or appearance may vary.

LP TUNES REPLACEMENT FOR AUDIO-TECHNICA ATS-12 ATS12 STYLUS

The LP Tunes ATS-12 ATS12 stylus replacement features a highly polished special elliptical diamond with .0003 x .0007 inch scanning radii. It offers very high precision tracing of record grooves and results in finer delineation of harmonics, detail and excellent musicality. The stylus is made in Japan by an eminent stylus manufacturer. The stylus replacement usually comes in various colors.

● Highest quality ATS12 stylus for Audio-Technica AT12E cartridge
● Better than original elliptical diamond for very high fidelity
● Made by Japanese shokunin seeking to create perfection with each stylus
● Special elliptical diamond tip r/R radii: .0003 × .0007 inch (.3 x .7 mils)
● Low-mass alloy cantilever for groove tracing accuracy and fidelity
● Each stylus undergoes QC and listening test as final inspection
● LP TUNES® stylus - Above and beyond copies and generics

Audio-Technica AT12E Cartridge Specifications (for reference only)
- Type: Dual moving magnet
- Frequency response: 15-26,000 Hz
- Output voltage @ 1kHz, 5 cm/s: 3.5 mV
- Recommended tracking force: 1.5 g
- Channel separation: 23 dB
- Stylus shape: 0.4 x 0.7 mil elliptical diamond
- Replacement stylus: ATS12

Notes: (1) Tracking force greater than the maximum indicated should not be used.
(2) Specifications for original Audio-Technica cartridge provided for reference only.

NSS/e LP TUNES UPGRADE REPLACEMENT FOR AUDIO-TECHNICA ATS11E STYLUS

● Special limited-run Red dot ATS11E Nude stylus for Audio-Technica AT11E cartridge
● Crafted for precision, quality, and performance
● Sound quality (SQ) and performance beyond current production substitutes
● Nude 0.3 x 0.7 mil elliptical diamond tip titanium bonded to custom alloy cantilever
● Low-mass alloy cantilever for groove tracing accuracy and fidelity
● Tracking force range: 0.75 - 1.5 grams
● LP TUNES® stylus - Above and beyond copies and generics

The Nude Schwarz stylus (NSS) raises the bar in stylus performance. For over half a century, the traditional way to craft a stylus, which carries on still today, is to bond the stylus tip to a crown (metal shank) that in turn is bonded to the cantilever. The additional mass, and a different material element in between the diamond tip and cantilever, cause some loss of resolution in transmitting groove modulation from the tip to the cantilever. With the Schwarz edition, a nude diamond stylus (a whole diamond) is inserted, fastened and/or glued directly to the cantilever - banishing the need for the crown (metal shank).

Thus, you can hear higher fidelity and exhilarating sound quality in every NSS stylus that you install in your cartridge! The unencumbered polycrystalline diamond tip (for toughness and longer-playing life) directly traces the grooves for optimal retrieval of record groove modulation.

LP TUNES UPGRADE REPLACEMENT FOR AUDIO-TEHNICA  ATS12 ATS11E ATS10  (ATS-12 ATS-11E ATS-10) STYLUS

The ATS-12VL stylus is equipped with a 0.2 x 3.0 mil Vivid Line diamond, which provides superior tracing and tracking of record grooves producing excellent reproduction of sound, voice, & harmonics.

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus please contact us here

Stylus Upgrade Options
Ultimate Upgrade: ATS12S

For enhancements to sound quality and fidelity please refer to the Related Products below.

JICO REPLACEMENT FOR AUDIO-TECHNICA ATS-12S ATS 12S ATS12S STYLUS

Out of stock. Please see the 100% compatible 88-100Q / ATN12S Jico Shibata Replacement Stylus for the Audio-Technica ATN12S ATN-12S, Kenwood/Trio N32 N-32, and Others., or see the recommend Product Options below.

The ATS12S stylus is equipped with a Shibata diamond, which provides superior tracing and tracking of record grooves producing excellent reproduction of sound, voice, & harmonics.

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus please contact us here

Beware of counterfeits! There is only one Jico distributor in the US, Canada and all of the Americas: LP Tunes. A Jico stylus comes in Jico packaging or with Jico US engraved on the stylus. All others are selling styli of unknown origin and quality. Contact us to verify the authenticity of the claimed Jico stylus before buying.

For enhancements to sound quality and fidelity please refer to the Related Products below.