7/21/2026: LP Tunes launches new platform—Unified Solutions Platform (USP)™. It unifies upgrade options on a single page, simplifying customers' search for high-fidelity turntable componentss—such as turntable styli, cartridges, and belts.

LP Tunes BIN 323 phono cartridge
Vendor:LP Tunes

BIN 323 PHONO CARTRIDGE - HIGH OUTPUT MOVING COIL CARTRIDGE 1.7 mV
- Does nothing at all but play music magnificently

"A couple of months ago I purchased a BIN 323 Phono Cartridge for LP Gear to add some variety to my line up of Phono Cartridges.  I have some good cartridges from Audio Technica and Hana, mostly Moving Coil cartridges.  I wanted something different from what I had to listen to, so I read up on the LP Gear BIN 323 High Output Coil cartridge. I first installed it on my Technics SL1200GR direct drive deck for a spin.  At first, I found nothing special other than it seemed to have more output falling somewhere between a good Moving Magnet and Moving Coil cartridge.  Early on, it sounded to be a bit "Knarly" sounding with the high frequencies, with too much of a sharp edge.  After about 5 to 6 weeks of frequent use, it smoothed out quite bit and sounded more natural and pleasing.

The cymbals and other high frequencies now sound natural, and are quite pleasing in fact.  This preamp can serve both moving coil and moving magnet cartridges and to me, sounds equally well with either.  I'm glad I have a BIN 323 as it can serve the needs of most magnet and coil output phono cartridges. 
Give one a try as you may like the Audio as I did. The BIN 323 sounds better than I ever expected. Not far off the audio from my Hana SL Cartridge"      
- Customer Feedback

The BIN 323 is a product of serendipity and universal auspiciousness. For decades we had aspired for a Moving Coil cartridge that is unpretentiously musical - just like the Small and Large Advent Speakers2 in the Seventies that became standards of high excellence despite their very modest price. On my meager part-time job, I was able to set aside and afford them as a student at DePaul University in Chicago. The BIN 323 was conceived and designed during the pinnacle age of phono cartridges and is thus founded on the exuberance, best practices and exclusive knowledge of that golden and fertile time. Revived with additional learning, select newer parts, tight tolerances and old world craftsmanship, the BIN 323 like vintage years of superior wine has improved with age to become the best in doing what it does - nothing at all but sweet authentic music extracted from the grooves!

Serendipity and auspiciousness are courtesy of Sugano San. He introduced me to Masao Okada-San, the cartridge grand master of Excel Sound fame, the well-spring of many highly regarded cartridges. With the BIN cartridges, Okada-San had full control of product development. We wanted the BIN to be his best signature work at an affordable, world-class High-Output MC cartridge. We wanted a MC product that MM users could eaily, and without encumbrance transition to and enjoy MC sound quality. Its sound quality thus bears Okada-San's DNA as can be heard in his later works with their HANA cartridges.

LP GEAR BIN 323 Musically
The BIN 323 plays glowingly with flowing musical ease and rightness that takes your breath away - it's like the mind knows when music is real.2 The BIN 323 offers harmonic and spectral richness, flowing musicality - harmonic notes, transients and counterpoints flow cascading and colliding cohesively from start to fading end. Your ears will hear the delightful delicacy, natural sound quality and missing timbre extracted from the grooves.

LP GEAR BIN 323 Specifications
Tonearm mount: 1/2 inch
Type: Moving coil (MC), high output
Output voltage at 1kHz, 3.54 cm/sec: 1.7 mV
Frequency response: 15 - 40,000 Hz
Load impedance: 47 kΩ
Channel separation at 1 kHz: 25 dB
Output balance at 1 kHz: <1.0 dB
Tracking force range: 2.0 - 2.3 g (2.0 g recommended)
Coil inductance at 1kHz: 630 μH
Static compliance: 15 x 10-6 cm/dyne
Dynamic compliance: 10 x 10-6 cm/dyne
Stylus: Nude Special Line Contact 
Stylus shape: 5 x 20 µm
Cantilever: Special aluminum alloy
Vertical tracking angle: 23°
Dimensions: 17(H) × 17(W) × 24.7(D) mm
Weight: 4.0 g (5.6 g with brass mounting hardware and shim)
Accessories included: Stylus protector (x 1), Brass screws (x 2), Brass nuts (x 2), Alignment Protractor, LP Gear 1.2 g Shim

Note: Specifications are subject to change without notice.

____________________________________
1 Paul Szabady, "LP Gear BIN 323 MC Phono Cartridge May, 2018.
2 J. Gordon Holt, "The Advent Loudspeaker," Stereophile, Jan 1, 1971.
2 Music listening equipment: Graham Slee Reflex M phono preamp, Graham Slee Elevator EXP headamp, Denon AU-300LC Step-up transformer, Graham Slee Proprius mono amps, Electronic Visionary Systems Ultimate Attenuators Passive Preamp, Odyssey Kismet Reference Amp, Quicksilver Silver 88 mono amps, Roadrunner Digital Turntable Tachometer, Sota Sapphire turntable, Supex SD 901 Super cartridge, Denon DL-103 cartridge, Denon DL-110 cartridge, Grace F-9E cartridge, Audience SE Phono Cable, Audience Ohno speaker cables, Rogers LS3/5A speakers, Audience ClairAudient 1+1 Loudspeakers, Krell LAT 2 speakers, Yamaha NS1000M speakers.

5.0
Grado Silver 1 Silver1 P-mount T4P phono cartridge (Free US Ground S&H) - FOR U.S. SALE ONLY
Vendor:Grado

GRADO SILVER 1 SILVER1 P-MOUNT T4P PHONO CARTRIDGE

Ships to US only

Grado P-mount T4P cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of P-mount T4P cartridges are designed for high output and excellent stability under the most demanding conditions. All of the the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height, width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance.

Grado Silver 1 P-mount T4P Phono Cartridge Specifications
- Type: Moving magnet
- Output voltage: 5mV
- Frequency response: 10Hz-60kHz
- Load impedance: 47k ohms
- Channel separation: 35dB
- Stylus type: Elliptical
- Stylus replacement: User replaceable
- Compliance: 20mm/N
- Tracking force: 1.0-2.0 g
- Recommended tracking force: 1.5 g
- Weight: 5.5 g

For stylus replacements, refer to Related Products:
- Standard stylus: Grado Silver Stylus
- Upgrade stylus: Grado Gold Stylus

Grado Red 1 Red1 phono cartridge - FOR U.S. SALE ONLY
Vendor:Grado

GRADO RED 1 RED1 PHONO CARTRIDGE

Ships to US only

Grado cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of cartridges are designed output and excellent stability under for high the most demanding conditions. All of the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height, width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance.

Grado Red 1 Phono Cartridge Specifications
- Type: Moving magnet
- Output voltage: 5mV
- Frequency response: 10Hz-55kHz
- Load impedance: 47k ohms
- Channel separation: 30dB
- Stylus type: Elliptical
- Stylus replacement: User replaceable
- Compliance: 20mm/N
- Tracking force: 1.0 - 2.0 g
- Recommended tracking force: 1.5 g
- Weight: 5.5 g

For stylus replacements, refer to Related Products:
- Standard stylus: Grado Red Stylus
- Downgrade stylus: Grado Blue Stylus

Goldring 1006 phono cartridge
Vendor:Goldring

Goldring 1006 Phono Cartridge

$399.00
GOLDRING 1006 PHONO CARTRIDGE

The Goldring 1006 is an advanced moving magnet phono cartridge designed for turntable owners who want to achieve analog excellence at an affordable price. This cartridge has an elliptical tip for improved high frequency clarity and a powerful magnet to ensure high sensitivity. The Goldring 1006 phono cartridge has a strong, one-piece molded body made from an ultra-rigid glass-reinforced polyester. All fixed parts can be held securely in place and the body can be tightly bolted to the head shell to create structural unity. Its highly efficient magnetic circuit makes for a smooth and extended frequency response. As with all Goldring cartridges, the Goldring 1006 phono cartridge is rigorously tested at the factory to ensure optimum standards of performance and reliability.

Goldring 1006 Phono Cartridge Specifications
- Frequency response: 20Hz-20kHz ± 3dB
- Channel balance @ 1kHz: 2dB
- Channel separation @ 1kHz: 20dB
- Output voltage: 6.5mV
- Static compliance: 24mm/N lateral, 16mm/N vertical
- Equivalent tip mass: 0.45 mg
- Vertical tracking angle: 24°
- Stylus shape: Elliptical
- Stylus replacement: Golding D06
- Load resistance: 47k ohms
- Load capacitance: 150-200 pf
- Internal inductance: 560 mH
- Internal resistance: 660 ohms
- Weight: 6.3 g
- Mounting: 1/2 inch (12.7 mm)
- Tracking force range: 1.5-2.0 g (1.7 g nominal)

5.0
Audio-Technica AT150SA Pre-mount
AUDIO-TECHNICA AT150SA CARTRIDGE PREMOUNT WITH HIGH DEFINITION HEADSHELL
- Audio-Technica AT150Sa cartridge premounted on world class HD Headshell

Audio-Technica AT150Sa with High Definition Headshell (HD) offers sterling sound quality and compatibility with turntables:
- LP Tunes High-Definition half-inch mount headshell
- Aerospace alloy for tensile strength and low resonance
- SOAR HD5 headshell wires for exceptional sound quality
- Aligned length 52 mm for use with many tonearms
- Alignment adjustable for extra precision and compatibility
- Free alignment protractor
- Total weight of 16.0g with Audio-Technica AT150Sa is suited to more turntables and their tonearms. There is no need to change the counterweight.

AT150Sa, AT150MLX, AT150ANV Vignette
The progenitors of the new AT150SA, the AT150MLX and AT150ANV cartridges offer exceptional accuracy and for the AT150ANV - supreme fidelity. Within their celestial universe, the AT150SA with its Nude Shibata stylus also administer delicacy. Graced with a Nude Shibata stylus on a tapered pipe aluminum cantilever, the AT150SA through technical expertise and artisanship lifts from the record grooves sublime music. Music you'll want to keep enjoying.

Audio-Technica AT150SA cartridge specifications
- Type: Moving Magnet VM Dual Magnet Stereo
- Frequency response: 10 ~ 25,000 Hz
- Output voltage: 4.0 mV (1kHz, 5 cm/sec.)
- Channel separation: 30 dB (1kHz)
- Output balance: 1.0 dB (1kHz)
- Tracking force: 1.0 ~ 1.8 g (1.4 g standard)
- Coil impedance: 3.2 kΩ (1kHz)
- DC resistance: 800 Ω
- Rec. load impedance: 47 kΩ
- Coil inductance: 490 mH (1kHz)
- Static compliance: 40 10-6 cm/dyne
- Dynamic compliance: 10 10-6 cm/dyne (100Hz)
- Stylus: Solid Shibata
- Cantilever: Aluminum, taper pipe
- Vertical tracking angle: 23
- Dimensions: 17.3(H) 17.0(W) 28.2(D) mm
- Weight: 8.0 g
- Accessories: Non-magnetic driver 1, non-magnetic mounting screws 5mm 2,8 mm 2, PCOCC lead wires 4, washer 2, nut 2, Brush 1.

Note: Specifications are subject to change without notice.

____________________________________

Music listening equipment: Graham Slee Reflex M phono preamp, Graham Slee Elevator EXP headamp, Denon AU-300LC Step-up transformer, Graham Slee Proprius mono amps, Odsssey Kismet Reference Amp, Quicksilver Silver 88 mono amps, Roadrunner Digital Turntable Tachometer, Sota Sapphire turntable, Audience SE Phono Cable, Audience Ohno speaker cables, Rogers LS3/5A speakers, Audience ClairAudient 1+1 Loudspeakers, Krell LAT 2 speakers, Yamaha NS1000M speakers, LP Tunes CF3600LE cartridge, Ortofon 2M Red cartridge, Ortofon 2M Blue cartridge, Ortofon 2M Bronze cartridge, Ortofon 2M Black cartridge, Rega Carbon cartridge, Supex SD 901 Super cartridge, Denon DL-103 cartridge, Denon DL-110 cartridge, Grace F-9E cartridge.

ADC LMA-1 LMA 1 LMA1 phono cartridge
Vendor:ADC
ADC LMA-1 LMA 1 LMA1 PHONO CARTRIDGE

The ADC LMA-1 LMA 1 LMA1 phono cartridge is sold out and no longer available.

4.0
Nagaoka MP-150 MP 150 MP150 phono cartridge
Vendor:Nagaoka
NAGAOKA MP-150 MP 150 MP150 PHONO CARTRIDGE

The Nagaoka MP-150 phono cartridge offers superior clarity, detail and dynamic contrast.

Nagaoka MP-150 Phono Cartridge Specifications
- Type: Moving magnet
- Cantilever: Hardened, low-mass tapered
- Stylus type: Superfine elliptical diamond
- Weight: 6.5 g
- Output voltage @ 1kHz,5cm/sec: 4.5mV
- Frequency response: 20Hz-20kHz
- Channel balance @ 1kHz: > 1.5dB
- Channel separation @ 1kHz: > 24dB
- Recommended loading: 47k ohms
- Dynamic compliance: 6.0 x 10-6 cm/dyne
- Static compliance: 18 x 10-6 cm/dyne
- Tracking force range: 1.5 - 2.0 g
- Break-in period: 30 hours
- Stylus replacement: Nagaoka JN-P150

LP Tunes Ortofon 2M Red Pre-mount
Vendor:LP Tunes
LP Tunes Ortofon 2M Red Pre-mount

This LP Tunes Pre-mount consists of an Ortofon 2M Red cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted Ortofon 2M Red cartridge
LP Tunes Ortofon 2M Black Pre-mount
Vendor:LP Tunes
LP Tunes Ortofon 2M Black Pre-mount

This LP Tunes Pre-mount consists of an Ortofon 2M Black cartridge mounted onto a world-class HD headshell for your convenience.
  • LP Tunes High-Definition inch mount headshell
  • Aerospace alloy for tensile strength and low resonance
  • SOAR HD5 headshell wires for exceptional sound quality
  • Aligned length ~52 mm for use with many tonearms
  • Alignment adjustable for extra precision and compatibility
  • Free alignment protractor
  • 16.7g weight with mounted Ortofon 2M Black cartridge
LP Tunes iMAGE phono cartridge
Vendor:LP Tunes

LP Tunes iMAGE Phono Cartridge

$36.95

LP Tunes iMAGE PHONO CARTRIDGE

The LP Tunes iMAGE phono cartridge offers higher fidelity sound quality for popular USB turntables such as ion and Numark. We've improved its performance by using a special conical diamond stylus bonded to a thin wall Zualum cantilever that traces a precise image of the grooves thus resulting in better sound quality with more atmosphere and clarity. This is in fact the signature and theme of the iMAGE series. It's a fine sound that elevates and soothes.

As in other series within the LP Tunes magnetic phono cartridge range, your investment in an entry level cartridge does not become obsolete. When your appreciation of music and critical listening develop and your demands for sophisticated electronics grow, you can easily and sensibly upgrade performance by simply installing a better stylus within the series.

For those seeking better sound quality and musical redemption from their USB turntable for recording and listening, the LP Tunes iMAGE phono cartridge offers upliftment.

The cartridge comes complete with a LP Tunes iSMG9 stylus, installation instructions, screws and nuts.

LP Tunes iMAGE Phono Cartridge Specifications
- Output voltage @ 1kHz,5 cm/sec: 2.4mV
- Channel balance @ 1kHz: < 2.5dB
- Channel separation @ 1kHz: > 16dB
- Frequency response: 20Hz-20kHz
- Stylus type: Bonded special conical diamond
- Stylus tip radius: 0.5 x 0.6 mil
- Tracking force range: 2.5 - 3.5 g
- Tracking force recommended: 3 g
- Tracking ability @ 315Hz @ recommended tracking force: 70µm
- Internal impedance: 1.2k ohms
- Recommended load resistance: 47k ohms
- Color: Black/Red
- Weight: 4.3 g
- Stylus replacement: LP Tunes iSMG9

Grado Reference Platinum 1 Platinum1 phono cartridge 5.0mV
Vendor:Grado
GRADO REFERENCE PLATINUM 1 PLATINUM1 PHONO CARTRIDGE

The newly redesigned Grado Platinum 1 cartridge offers four improvements over its predecessor. The coil design has been reconfigured. The size of the coils were reduced, cutting back on the number of turns, for improved sound quality. Grado Labs has developed a new process of potting the coils which helps control internal resonance in the coils which then lowers the noise floor even more than before. Also, the effective moving mass of their generating system has been reduced by 17%, thus allowing for a quicker and more accurate reproduction of music. All this is hand-assembled within a machined, new processed, Australian Jarrah wood housing. The wood enclosure has been changed from Mahogany to Australian Jarrah, which is a much harder and denser, thus adding greater stability to the cartridge as a generating device.

Grado Reference Platinum 1 Phono Cartridge Specifications
- Type: Moving Iron
- Output voltage: 5mV
- Frequency response: 10Hz-60kHz
- Load impedance: 47k ohms
- Channel separation: 40dB
- Stylus type: Special elliptical
- Stylus replacement: Factory replaceable
- Mounting: 1/2 inch
- Compliance: 20mm/N
- Tracking force: .075-2.0 g
- Recommended tracking force: 1.5 g
- Weight: 6.5 g

Goldring 2100 phono cartridge
Vendor:Goldring

Goldring 2100 Phono Cartridge

$170.95
GOLDRING 2100 PHONO CARTRIDGE

The Goldring 2100 is a dynamic sounding cartridge with an elliptical diamond stylus producing high-frequency clarity and quality sound. The Goldring 2100 can be used to upgrade many budget turntables.

Goldring 2100 Phono Cartridge Specifications
- Mounting: 1/2 inch (12.7 mm)
- Channel balance: 2dB @ 1kHz
- Channel separation: >20dB @ 1kHz
- Output voltage: 6.5mV±1.5dB, 1kHz @ 5 cm/sec
- Static compliance: 20x
- Vertical tracking angle: 24°
- Stylus radius: elliptical .0007 x .0003 inch
- Stylus type: Replaceable, Goldring GL2100 stylus
- Load resistance: 47k ohms
- Load capacitance: 100 - 200 pf
- Internal inductance: 550 mH
- Internal resistance: 550 ohms
- Weight: 7.2 g
- Tracking force range: 1.5 - 2.0 g (1.7 g nominal)

Benz Micro Silver MC Cartridge 2.0mV output (Free US Ground S&H)
Vendor:Benz Micro
BENZ MICRO SILVER MC PHONO CARTRIDGE

The Benz Micro Silver Moving Coil phono cartridge is a real smooth performer, delivering much of the natural tonal balance and high accuracy of its more expensive brethens. It offers a friendly 2.0mV output and performs with excellence when used with regular Moving Magnet phono preamps. There's no more reason why you shouldn't go MCing!

Re-tip Exchange Allowance is offered. Please email us for the re-tip exchange value of your cartridge - working or not.

Re-tip Exchange Instructions: Should you purchase this cartridge with a re-tip exchange, please note when you check out your total will show the normal sale price and NOT the re-tip exchange price. When we process your order, you will be charged ONLY the re-tip exchange price. After you receive your new Benz-Micro cartridge, please carefully pack and ship your old Benz Micro Silver MC cartridge to us (see our website for address).

Benz Micro Silver MC Phono Cartridge Specifications
- Type: Moving coil stereo cartridge
- Cantilever: Aluminum alloy tube
- Stylus type: Elliptical diamond
- Stylus tip radius: 0.3 x 0.7 mil
- Vertical tracking angle: 20°
- Output voltage @ 3.54 cm/sec: 2.0mV
- Internal impedance: 120 ohms
- Frequency response: 20Hz-25kHz
- Channel balance @ 1kHz: >1.2dB
- Channel separation @ 1kHz: >30 dB
- Dynamic compliance: 15 µm/mN
- Recommended loading: >200 - 47k ohms
- Tracking force range: 1.8-2.2 g
- Tracking force recommended: 2 g (20 mN)
- Recommended tonearm mass: Medium to high
- Optimum working temperature: 23° C
- Break-in period: 30 hours
- Warranty: 2 years manufacturing defect

Benz Micro Gold MC Cartridge 0.4mV output (Free US Ground S&H)
Vendor:Benz Micro
BENZ MICRO GOLD MC PHONO CARTRIDGE

The Benz Micro Gold Moving Coil phono cartridge is a real smooth performer, delivering much of the natural tonal balance and high accuracy of its more expensive brethens. It offers a friendly 0.4mV output and performs with excellence when used with MC capable phono pre amps. Near musical nirvana comes built into the Benz Micro Gold MC cartridge. Like a number of its brethens, the Benz Micro Gold MC cartridge is a Stereophile Recommended Component.

Re-tip Exchange Allowance is offered. Please email us for the re-tip exchange value of your cartridge - working or not.

Re-tip Exchange Instructions: Should you purchase this cartridge with a re-tip exchange, please note when you check out your total will show the normal sale price and NOT the re-tip exchange price. When we process your order, you will be charged ONLY the re-tip exchange price. After you receive your new Benz-Micro cartridge, please carefully pack and ship your old Benz Micro Gold MC cartridge to us (see our website for address).

Benz Micro Gold MC Phono Cartridge Specifications
- Type: Moving coil stereo cartridge
- Cantilever: Aluminum alloy tube
- Stylus type: Elliptical diamond
- Stylus tip radius: 0.3 x 0.7 mil
- Vertical tracking angle: 23°
- Output voltage @ 3.54cm/sec: 0.4mV
- Internal impedance: 120 ohms
- Frequency response: 20Hz-25kHz
- Channel balance @ 1kHz: >1.2 dB
- Channel separation @ 1kHz: >30 dB
- Dynamic compliance: 15 µm/mN
- Recommended loading: >200 - 47k ohms
- Tracking force range: 1.8-2.2 g
- Tracking force recommended: 2 g (20 mN)
- Recommended tonearm mass: Medium to high
- Optimum working temperature: 23° C
- Break-in period: 30 hours
- Warranty: 2 years manufacturing defect