Audio-Technica Needles / Stylus

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA XLS-60I XLS60I CARTRIDGE

The Audio-Technica ATN-12S ATN12S needle stylus for the Audio-Technica XLS-60I XLS60I phono cartridge features the highly acclaimed Shibata diamond tip for superior tracking and tracing of record grooves. It offers excellent rendition of voice and music with harmonically complete sound quality. The stylus is made in Japan by Audio-Technica.

Stylus Alternative and Options
- For stylus alternative and accessories that enhance sound quality and fidelity, refer to Related Products.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA XLS-70II XLS70II CARTRIDGE
-Out of stock, discontinued. For alternative stylus replacement, refer to Related Products below.

The Audio-Technica ATS-14 ATS14 needle stylus for the Audio-Technica XLS-70II XLS70II phono cartridge features a Shibata diamond for superlative tracing of record grooves and reduced distortion and record wear. It results in excellent musical accuracy, naturally sweet tone and complete harmonic integrity. The stylus is made in Japan by Audio-Technica.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA XR-18E XR18E CARTRIDGE

The Audio-Technica needle stylus for the Audio-Technica XR-18E XR18E phono cartridge features a highly polished elliptical diamond with a .0004 x .0007 inch radii. It offers precision tracing of record grooves thus resulting in finer delineation of harmonics, high accuracy and excellent musicality. The stylus is made in Japan by Audio-Technica.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA Z-700 Z700 CARTRIDGE

The Audio-Technica needle stylus for the Audio-Technica Z-700 Z700 phono cartridge features a highly polished elliptical diamond with a .0004 x .0007 inch radii. It offers precision tracing of record grooves thus resulting in finer delineation of harmonics, high accuracy and excellent musicality. The stylus is made in Japan by Audio-Technica.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-72K AT72K CARTRIDGE

● Special precision polished conical diamond tip for high fidelity
● .0007 inch radii for tracing accuracy and reduced record wear
● High strength aluminum alloy cantilever for firm contact with LP grooves
● Genuine, unsurpassed 100% original Audio-Technica stylus

The Audio-Technica ATN72K ATN-72K stylus is specified for the Audio-Technica AT72K AT-72 phono cartridge. It features a highly polished conical diamond for long playing life, reduced record wear and good rendition of voice and music. The color of the stylus may vary from above photo.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-9V AT9V CARTRIDGE

The Audio-Technica ATN-7V ATN7V needle stylus is a substitute stylus for the Audio-Technica AT-9V AT9V phono cartridge. The stylus features a highly polished grain-oriented, square-shank nude special elliptical diamond with a 0.2 x 0.7 mil tracing radii. It is mounted on a tapered aluminum alloy cantilever for natural sound reproduction, long playing life, very high fidelity, dynamics and very high resolution. The stylus is made in Japan by Audio-Technica.

AUDIO-TECHNICA TECHNICRAFT TCN-4000 TCN 4000 TCN4000 STYLUS

The Audio-Technica Technicraft TCN-4000 TCN4000 needle stylus is used with the Audio-Technica Technicraft TC-4000 TC4000 phono cartridge. It can also be used to upgrade the performance of the Technicraft TC1000, TC2000 and TC3000 phono cartridges to the level of the TC4000 phono cartridge. The stylus features a highly polished and shaped linear contact nude natural diamond bonded to tapered cantilever for pinnacle tracking and tracing performance and musical reproduction. The Audio-Technica Technicraft TCN-4000 TCN4000 is the best stylus created for the Technicraft series. The stylus is made in Japan by Audio-Technica.

AUDIO-TECHNICA VMN10CB STYLUS
- Genuine, unsurpassed original, 100% authentic stylus by Audio-Technica

Audio Technicas VMN10CB stylus for the Audio Technica VM510CB phono cartridge features a 0.6 mil conical bonded stylus which follows the record grooves with reliable performance and exceptional fidelity.

Audio-Technica VMN10CB Stylus Specifications
- Frequency response: 20Hz-20kHz
- Output voltage @ 1kHz,5cm/sec.: 5.0mV
- Channel balance: 1.5dB
- Channel separation @ 1kHz: 25dB
- Stylus type: 0.6mil Bonded Conical
- Cantilever: Aluminum pipe
- Tracking force range: 1.8-2.2g
- Tracking force recommended: 2.0g
- Color: Blue

Note: Specifications are subject to change without notice.

AUDIO-TECHNICA VMN20EB STYLUS
- Genuine, unsurpassed original, 100% authentic stylus by Audio-Technica

Audio Technicas VMN20EB stylus for the Audio Technica VM520EB phono cartridge features a 0.3 x 0.7 mil elliptical bonded stylus which follows the record grooves with more precision while providing lower distortion.

Audio-Technica VMN20EB Stylus Specifications
- Frequency response: 20Hz-23kHz
- Output voltage @ 1kHz,5cm/sec.: 4.5mV
- Channel balance: 1.5dB
- Channel separation @ 1kHz: 27dB
- Stylus type: 0.3x0.7mil Bonded Elliptical
- Cantilever: Aluminum pipe
- Tracking force range: 1.8-2.2g
- Tracking force recommended: 2.0g
- Color: Blue

Note: Specifications are subject to change without notice.

AUDIO-TECHNICA VMN30EN STYLUS
- Genuine, unsurpassed original, 100% authentic stylus by Audio-Technica

Audio Technicas VMN30EN stylus for the Audio Technica VM530EN phono cartridge features a 0.3 x 0.7 mil elliptical nude stylus follows the record grooves with more precision while providing lower distortion.

Audio-Technica VMN30EN Stylus Specifications
- Frequency response: 20Hz-25kHz
- Output voltage @ 1kHz,5cm/sec.: 4.5mV
- Channel balance: 1.5dB
- Channel separation @ 1kHz: 27dB
- Stylus type: 0.3x0.7mil Nude Elliptical
- Cantilever: Aluminum pipe
- Tracking force range: 1.8-2.2g
- Tracking force recommended: 2.0g
- Color: Yellow

Note: Specifications are subject to change without notice.

AUDIO-TECHNICA VMN30EN STYLUS FOR AUDIO-TECHNICA AT-140EaG AT140EaG CARTRIDGE

The Audio-Technica VMN30EN stylus for the Audio-Technica AT-140EaG AT140EaG phono cartridge features a highly polished Nude Elliptical diamond for superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality. The stylus is made in Japan by Audio-Technica a world-class manufacturer.

Audio-Technica VM30EN stylus specifications
- Tracking force: 1.8 ~ 2.2 g (2.0 g standard)
- Static compliance: 35 × 10-6 cm/dyne
- Dynamic compliance: 8 × 10-6 cm/dyne (100Hz)
- Stylus: Nude elliptical (0.3 × 0.7 mil)
- Cantilever: Aluminum pipe
- Vertical tracking angle: 23 °
- Color: Orange

Note: Specifications are subject to change without notice.

AUDIO-TECHNICA VMN40ML STYLUS
- Genuine, unsurpassed original, 100% authentic stylus by Audio-Technica

Audio Technicas VMN40ML stylus for the Audio Technica VM740ML phono cartridge features a MicroLine nude stylus for extremely accurate grove tracking which extends record life and produces distinct audio reproduction.

Audio-Technica VMN40ML Stylus Specifications
- Frequency response: 20Hz-27kHz
- Output voltage @ 1kHz,5cm/sec.: 4.0mV
- Channel balance: 1.0dB
- Channel separation @ 1kHz: 28dB
- Stylus type: 2.2x0.12mil Nude MicroLine
- Cantilever: Aluminum tapered pipe
- Tracking force range: 1.8-2.2g
- Tracking force recommended: 2.0g
- Color: Red

Note: Specifications are subject to change without notice.

AUDIO-TECHNNICA VMN40ML STYLUS FOR AUDIO-TECHNICA VM540ML CARTRIDGE

The Audio-Technica VMN40ML is specified as the standard stylus replacement for the VM540ML cartridge. It will bring the VM540ML's performance back to original factory specifications.

● Genuine Audio-Technica VMN40ML stylus For VM540ML, VM740ML cartrudge.
● Nude MicroLine (2.2 × 0.12 mil)
● Exquisitely crafted and precision engineered in Japan
● Finest quality available by the original manufacturer
● Curated by LP Tunes® for long-term listening pleasure

AUDIO-TECHNICA VMN50SH STYLUS
- Genuine, unsurpassed original, 100% authentic stylus by Audio-Technica

Audio Technicas VMN50SH stylus for the Audio Technica VM750SH phono cartridge features a shibata nude stylus which allows greater surface contact with the record groove while reducing groove stress and distortion.

Audio-Technica VMN50SH Specifications
- Frequency response: 20Hz-27kHz
- Output voltage @ 1kHz,5cm/sec.: 4.0mV
- Channel balance: 1.0dB
- Channel separation @ 1kHz: 30dB
- Stylus type: 2.7x0.26mil Nude Shibata
- Cantilever: Aluminum tapered pipe
- Tracking force range: 1.8-2.2g
- Tracking force recommended: 2.0g
- Color: Brown

Note: Specifications are subject to change without notice.

AUDIO-TECHNICA VMN60SLC STYLUS
- Genuine, unsurpassed original, 100% authentic stylus by Audio-Technica

Audio Technicas VMN60SLC stylus for the Audio Technica VM760SLC phono cartridge features a special line contact stylus for superior tracking ability with minimum abrasion, distortion, & record wear.

Audio-Technica VMN60SLC Specifications
- Frequency response: 20Hz-30kHz
- Output voltage @ 1kHz,5cm/sec.: 4.0mV
- Channel balance: 1.0dB
- Channel separation @ 1kHz: 30dB
- Stylus type: 1.5x0.28mil Nude Special Line Contact
- Cantilever: Aluminum tapered pipe
- Tracking force range: 1.8-2.2g
- Tracking force recommended: 2.0g
- Color: Black

Note: Specifications are subject to change without notice.