Products

AUDIO-TECHNICA AT-92ECD CARTRIDGE - UNIVERSAL MOUNT

From the manufacturer: This .3 x .7 elliptical cartridge fits both Half-inch and P-Mount turntables. The AT-92E employs a special elliptical stylus with a smaller contact radius. This allows the cartridge to reproduce the highest frequencies with lower distortion for cleaner, more lifelike sound.

Audio-Technica AT-92ECD Cartridge Specifications
Frequency Response: 15-27,000 Hz
Channel Separation: 29/18 (dB at 1kHz/10 kHz
Vertical Tracking Force: 1.0-1.5 grams
Stylus Construction: Bonded round shank
Recommended Load Impedance: 47,000 ohms
Output: 3.5 (mV at 1 kHz, 5 cm/sec)
Channel Balance: 1.25 dB
Stylus Shape: 0.3 x 0.7 mil elliptical
Cantilever: Alloy tube
Mount: Universal

AUDIO-TECHNICA AT-95B AT 95B AT95B CARTRIDGE
- The world-class AT-95E with Black stylus

The legacy of excellence continues. The Audio-Technica AT-95B phono cartridge, the black version of the AT-95E, was named one of the industry's best products by the Editors of Stereophile.¹ Previously, the Audio-Technica AT-95E phono cartridge received the same high recommendation: Stereophile Recommended Component October 2004, 2005 and April 2006 (Vol. 27 No.10, Vol. 28 No.10 and Vol. 29 No.4). Packaged by LP Tunes, the Audio-Technica AT-95B is the only inexpensive cartridge included in the Stereophile Recommended List. All the other cartridges range from $200 - $17,000! Stereotimes.com March 2007 rated the Audio-Technica AT-95E phono cartridge Highly Recommended.

The Audio-Technica AT-95E phono cartridge has a very distinguished and colorful lineage. On its own, it has been a multiple recipient of Best Buy ratings in the UK. Its lineage is intertwined with the classic and musically acclaimed Linn Basik, K5 and K9 phono cartridges. Unlike these cartridges however, the AT-95E is delightfully affordable and available. Since October, 2004 and up to the present, the Audio-Technica AT-95E phono cartridge is included in the Stereophile Recommended Components List. It is the only inexpensive phono cartridge to be included in this highly selective recommended list! The review summarized the performance of the Audio-Technica AT-95E phono cartridge with the following words: "Makes music for 50 bucks!"

Paul Szabady in Stereotimes March 2007 had this to say about the Audio-Technica AT95E phono cartridge:

"The AT-95E integrates the range of the sonic bandwidth very well: no part of the spectrum sticks out at the listener. It doesn’t sound bright and it doesn’t sound dull at the top frequencies. Midrange is clear and detailed with no spittiness on vocals, though really cheap and inadequate analog match-ups will cause an slight upper mid-range burr."

The half-inch standard mount and dual-magnet Audio-Technica AT-95E cartridge sounds clear, dynamic and richly balanced. It allows music lovers to use limited means to upgrade their turntables and thus attain a higher level of discernment and listening pleasure without the financial burden typically associated with high end cartridges. Yes it is vibrant, dynamic and rich in detail as reviewers and users say, and some users may no longer wish to upgrade further. The Audio-Technica AT-95E phono cartridge has been consistently rated a "Best Buy" in the UK and we agree wholeheartedly.

Audio-Technica AT-95E Phono Cartridge Specifications
- Output voltage @ 1kHz, 5cm/sec.: 3.5mV
- Channel balance: Within 2dB
- Channel separation @ 1kHz: > 20dB
- Frequency response: 20Hz-20kHz
- Load resistance: 47k ohms
- Load capacitance: 100 - 200 pF
- Stylus type: Highly polished elliptical diamond stylus, 0.4 x 0.7 mil
- Tracking force range: 1.5 - 2.5 g
- Tracking force, recommended: 2.0 g (20 mN)
- Vertical tracking angle: 20°
- Coil impedance @ 1kHz: 2.8k ohms
- Coil inductance@ 1kHz: 400 mH
- Recommended load resistance: 47k ohms
- Color: Black
- Weight: 6.6 g
- Dimensions (mm): L 30.5 x W 17.0 x H 17.20
- Stylus replacement: Audio-Technica ATN95EB

¹ Michael Fremer et al, "Recommended Components: Editors Top Picks For The Industry's Best Products," Stereophile, Vol.34 No.4 (April 2011): 66.

AUDIO-TECHNICA AT-ART9 MC PHONO CARTRIDGE 0.5 mV
- Hearing a thousand glorious notes and blank spaces

The AT-ART9 is Audio-Technica's flagship moving-coil cartridge. Combining the craftsmanship, artistry and leading-edge engineering derived from the AT50ANV, AT-ART7 and AT-OC9/III cartridges, the AT-ART9 employs a vibration system and magnetic circuit that are the best-ever within the series thus resulting in exquisitely transparent and naturally complete sound quality. It is so startlingly honest that your ears convey to your right brain and it comes to a singularly quick conclusion - this is real music at its best. Just like the body knows real sugar from processed substitute. Still, it will throw you off - until your left brain processes this truth, logically, deductively and empirically.

 

● Its new magnetic circuit design adopts permendur yoke and neodymium magnet for dramatically increased magnetic energy, extremely low noise and improved bass response.

● Special line contact stylus with tip curvature radii of 40μm 7μm adopted in AT50ANV and solid boron cantilever with a 0.26 mm diameter allow accurate transfer of music signals from the stylus tip to the generating coil.

● Dual moving coil for high separation and wide response.

● Hybrid body inherited from the AT-ART7 cartridge design to suppress unwanted parasitic and deleterious resonances. The housing is made of machined aluminum materials to dissipate parasitic resonances for unimpeded sound quality and clarity.

● PCOCC coil wiring for direct and pure signal transmission

● High-quality brass screws for headshell attachment offers the best match for optimal sound quality.

Audio-Technica AT-ART9 Specifications
- Type: Moving Coil VM Dual Magnet Stereo
- Playback frequency range: 15 ~ 50,000 Hz
- Output voltage: 0.5 mV (1kHz, 5 cm/sec.)
- Channel separation: 30 dB (1kHz)
- Output balance: 0.5 dB (1kHz)
- Tracking force: 1.6 ~ 2.0 g (1.8 g standard)
- Coil impedance: 12 Ω (1kHz)
- DC resistance: 12 Ω
- Rec. load impedance: 100 Ω or more (when head amplifier connected)
- Coil inductance: 25 μH (1kHz)
- Static compliance: 35 10-6 cm/dyne
- Dynamic compliance: 18 10-6 cm/dyne (100Hz)
- Stylus: Special line contact stylus with tip radii curvature of 40μm 7μm
- Cantilever: Diameter 0.26mm solid boron
- Vertical tracking angle: 23
- Dimensions: 17.3(H) 17(W) 25.6(L) mm
- Weight: 8.5 g
- Accessories: non-magnetic driver 1, washer 2, Protector 1, Cartridge mounting screws 12mm 2,18 mm 2, Nut 2, Brush 1, PCOCC lead set 1.

Note: Specifications are subject to change without notice.

Reviews & Discussions
- "New ART-9 up and running..."

 

_______________________________________
Music listening equipment: Graham Slee Reflex M phono preamp, Graham Slee Elevator EXP headamp, Denon AU-300LC Step-up transformer, Graham Slee Proprius mono amps, Quicksilver Silver 88 mono amps, Sota Sapphire turntable, Audience SE Phono Cable, Audience Ohno speaker cables, Rogers LS3/5A speakers, Audience ClairAudient 1+1 Loudspeakers, Krell LAT 2 speakers, Yamaha NS1000M speakers.

 

AUDIO-TECHNICA AT-F2 AT F2 ATF2 PHONO CARTRIDGE

The new Audio-Technica AT-F2 stereo moving coil cartridge offers unheard of musical achievement and value. It is an excellent example of Audio-Technica's latest leap and advancement in technical expertise, unique technological knowledge, and employment of hybrid materials to engineer MC cartridges of optimal and world-class performance. In this instance, its high achievement is fulfilled through a balance of material use and technical implementations each contributing to the AT-F2's musical rightness - the reverse V-shaped dual left and right coil design, special elliptical stylus, aluminum pipe cantilever, PCOCC coil, Neodymium magnet, and precision crafted sturdy aluminum base.

Audio-Technica AT-F2 Phono Cartridge Specifications
- Tonearm mount: 1/2 inch
- Type: Moving coil
- Frequency response: 15Hz-30kHz
- Output voltage @ 1kHz,5cm/sec: 0.32mV
- Tracking force: 1.8-2.2 g (2.0 g standard)
- Recommended load impedance: Minimum 100 ohms
- Coil impedance: 12 ohms (1kHz)
- DC resistance: 12 ohms
- Channel separation @ 1kHz: 25dB
- Channel balance @ 1kHz: >1.5dB
- Dynamic compliance: 9.0 x 10^-6cm/dyne (100Hz)
- Static compliance: 35 x 10^-6cm/dyne
- Stylus: Elliptical 0.3 0.7 mil
- Vertical tracking angle: 23
- Dimensions: 17.3"h x 16.8"w x 25.4"l
- Weight: 5.0 g
- Accessories included: Stylus protector (x 1), nuts (x 2), washers (x 2), cartridge mounting screws 5 mm (x 2), 9 mm (x 2)

AUDIO-TECHNICA AT-F3/III AT F3/III ATF3/III PHONO CARTRIDGE

The Audio-Technica AT-F3/III stereo moving coil cartridge lets the music flow naturally from the grooves. This is achieved through a combination of special technical features each designed to capture more from the record grooves: the dual moving coil design, elliptical stylus, aluminum pipe cantilever and the vertical stabilizer mechanism.

Features
- Neodymium magnet for dramatically increased magnetic energy
- PCOCC used for coils and terminal pins for pure transmissions
- Dual moving coils for high separation and wide response
- Durable construction dedicated to achieving increased rigidity for improved signal-to-noise ratio

Audio-Technica AT-F3/III Phono Cartridge Specifications
- Tonearm mount: 1/2 inch
- Type: Moving coil
- Frequency response: 15Hz-50kHz
- Output voltage @ 1kHz,5cm/sec: 0.35mV
- Tracking force: 1.8-2.2 g (2 g standard)
- Recommended load impedance: Minimum 100 ohms
- Coil impedance: 12 ohms (1kHz)
- DC resistance: 12 ohms
- Channel separation @ 1kHz: 27dB
- Channel balance @ 1kHz: >1.5dB
- Dynamic compliance: 9.0 x 10^-6cm/dyne (100Hz)
- Static compliance: 35 x 10^-6cm/dyne
- Stylus type: 0.2 × 0.7 mil elliptical
- Suspension wires: Stainless
- Vertical tracking angle: 23°
- Dimensions (mm): H17.3 x W18.8 x L25.4
- Weight: 5 g
- Accessories included: Screwdriver, stylus protector, screws, nuts, washers

Reviews & Feedback
Just wanted to let you know that I received the AT-F3/III Wednesday and got it up and running. I mounted it on my REGA P3-24 using the Denneson Soundtractor, tracking at 2 grams and using a 2mm spacer under the arm. All I can say is WOW! A-T really improved on the original AT-F3/II. Sound is so much smoother and the shift to medium compliance is a HUGE +. It does very well on the RB-301 arm and is an unbelievable bargain at it's price...which I'm sure won't last long...

I have to tell you that I had an ORTO Salsa prior to the AT and I have to say that the AT is really a better cartridge...even though the Orto is twice as expensive. The Orto is just to HOT and in-you-face. Also, it tended to wobble a tad similar to the Grado dance. The AT just let's the music flow and makes you forget all the technical aspects and headaches you just suffered in tonearm/cart setup... This one's a WINNER!

Thanks for making this available,
JA
10-23-2010

AUDIO-TECHNICA AT-F7 AT F7 ATF7 PHONO CARTRIDGE

The new Audio-Technica AT-F7 stereo moving coil cartridge lets the listener immerse and experience the music. This is achieved through the combination of design features each uplifting the musical experience - the celebrated dual coil design, nude elliptical stylus, aluminum pipe cantilever and uses a 0.07 mil stainless suspension wire which serves as a fulcrum point for audio signal transfer for class leading sound quality and reliability. The Audio-Technica AT-F7 cartridge provides outstanding clarity and transparency of tone along with improved frequency response and precise stereo imaging.

Audio-Technica AT-F7 Phono Cartridge Specifications
- Tonearm mount: 1/2 inch
- Type: Moving coil
- Frequency response: 15Hz-50kHz
- Output voltage @ 1kHz,5cm/sec: 0.35mV
- Tracking force: 1.8-2.2 g (2.0 g standard)
- Recommended load impedance: Minimum 100 ohms
- Coil impedance: 12 ohms (1kHz)
- DC resistance: 12 ohms
- Channel separation @ 1kHz: 27dB
- Channel balance @ 1kHz: >1.5dB
- Dynamic compliance: 9.0 x 10^-6cm/dyne (100Hz)
- Static compliance: 35 x 10^-6cm/dyne
- Stylus: Nude elliptical 0.2 0.7 mil
- Suspension wires: Stainless - Vertical tracking angle: 23
- Dimensions: 17.3"h x 18.8"w x 25.4"l
- Weight: 5 g
- Accessories included: Screwdriver, stylus protector, screws, nuts, washers, stylus brush, PCOCC lead wire set

AUDIO-TECHNICA AT-HS10 BK HEADSHELL
~ AT-HS10 headshell in black

Designed for performance, the Audio-Technica ATHS10 headshell looks good too with its ridged pattern. Its aluminum die-cast body reduces vibration. The shape and design of the HS10, coupled with its lightweight construction, ensure vibraton is kept to a bare minimum.

Audio-Technica AT-HS10 Features
- 10.0 g weight for compatibility with many tonearms
- Aluminum die-cast ridged design for light weight
- Gold-plated lead wires for lossless signal transmission
- Excellent finger lift for precise lowering of stylus

AUDIO-TECHNICA AT-HS10 SV HEADSHELL
~ AT-HS10 headshell in silver

Designed for performance, the Audio-Technica ATHS10 headshell looks good too with its ridged pattern. Its aluminum die-cast body reduces vibration. The shape and design of the HS10, coupled with its lightweight construction, ensure vibraton is kept to a bare minimum.

Audio-Technica AT-HS10 Features
- 10.0 g weight for compatibility with many tonearms
- Aluminum die-cast ridged design for light weight
- Gold-plated lead wires for lossless signal transmission
- Excellent finger lift for precise lowering of stylus

The Audio-Technica ATHW5000 AT-HW5000 headphones are considered to possess many superlatives: the most musically accurate headphones, superlative construction and superlative comfort. The ATHW5000 AT-HW5000 AT HW5000 headphones are afterall the best headphones Audio-Technica crafts. And thus when you listen with these headphones, you will hear how the recording artists wanted their music to sound.

Audio-Technica ATH-W5000 headphones have:

• Striped ebony housing that provides unparalleled acoustical characteristics
• Ear pads cushioned in leather feature Audio-Technica's ultra-comfortable total ear fitting design
• 53 mm drivers (equipped with neodymium magnet systems) designed exclusively for the ATH-W5000
• Driver unit that incorporates a Permendur magnetic circuit with exceptional magnetic characteristics
• High-quality 8N-OFC (oxygen free copper) voice coils for ultra-efficient signal transfer
• Lightweight magnesium alloy frame
• Double Air Damping System for deep bass reproduction
• 3D Wing Support provides stable, comfortable fit
• Y-cable features an elastomer sheath that helps prevent tangles
• Padded, protective hard-shell case for safe, convenient storage
• Gold-plated (6.3 mm) stereo connector provides exceptional corrosion resistance, superb conductivity, low noise

For those committed to audio excellence, here are headphones that are truly exceptional in every way.

Audio-Technica ATH-W5000 Headphones Specifications
Type	Closed-back Dynamic, Double Air Damping System
Driver Diamter	53 mm
Magnet	Neodymium
Voice Coil	OFC8N bobbin-wound voice coil Permendeur magnetic circuit
Frequency Response	5 - 45,000
Maximum Input Power	2,000 mw
Sensitivity	102 dB/mW
Impedence	40 ohms
Weight	340 g (without cord)
Cable	Elastomer sheath/OFC6N + Hi-OFC 3.0 m dual sided 4-core parellel cable
Connector	Standard 1/4" (6.3 mm) gold plated stereo plug
Accessries Included	Hard case; cable storage bag

These are customer returns that were tested and repackaged by Audio-Technica USA. They have the same as new performance at a reduced price. Available while supplies last.

The Audio-Technica ATHW5000 headphones are considered to possess many superlatives: the most musically accurate headphones, superlative construction and superlative comfort. The ATHW5000 headphones are afterall the best headphones Audio-Technica crafts. And thus when you listen with these headphones, you will hear how the recording artists wanted their music to sound.

Audio-Technica ATH-W5000 Headphones Specifications
Type	Closed-back Dynamic, Double Air Damping System
Driver Diamter	53 mm
Magnet	Neodymium
Voice Coil	OFC8N bobbin-wound voice coil Permendeur magnetic circuit
Frequency Response	5 - 45,000
Maximum Input Power	2,000 mw
Sensitivity	102 dB/mW
Impedence	40 ohms
Weight	340 g (without cord)
Cable	Elastomer sheath/OFC6N + Hi-OFC 3.0 m dual sided 4-core parellel cable
Connector	Standard 1/4" (6.3 mm) gold plated stereo plug

● Heavy Tonearm Counterweight for Audio-Technica AT-LP120 and AT-LP120USB
● Enables AT-LP120 AT-LP120USB to use higher quality headshells and cartridges
● Enhances performance of original factory set-up with ATP-2 or AT95E cartridge
● Sits closer to the pivot point of the tonearm for better tracking and performance.
● Locking screw to set counterweight position and bind counterweight with tonearm
● Genuine, original Audio-Technica® AT-CW1 tonearm counterweight
● AT-CW1 does NOT fit the AT-LP120XUSB, AT-LP140XP, AT-LP1240-USB, AT-LP1240-USCXP turntables.

AUDIO-TECHNICA UPGRADE HEAVY TONEARM COUNTERWEIGHT AT-CW1 FOR AUDIO-TECHNICA AT-LP120 TURNTABLES
- Enables AT-LP120 and AT-LP120 USB turntables to use higher quality headshells and cartridges
- Does not work with AT-LP120XUSB turntable

Achieve new heights of sound quality and performance with your AT-LP120 by upgrading its counterweight. The Audio-Technica AT-CW1 Heavy Counter Weight enables the AT-LP120 and AT-LP120 USB turntables to use higher quality headshells and cartridges which usually are beyond the usable range of the standard counterweight supplied with the AT-LP120 turntables.

The AT-CW1 is actually a more suitable counterweight for the factory installed A-T headshell and AT95E cartridge that are provided with the AT-LP120USB turntable. It sits closer to the pivot point of the tonearm for better tracking and performance.

Audio-Technica AT-CW1 Heavy Counterweight
- For Audiotechnica AT-LP120 and AT-LP120 USB only
- Dimension: Ø 30,0 x 33 mm / Ø 10,6 mm (inner diameter)
- Weight: 136 g (net)
- Low limit: 13g combined weight of headshell, headshell wires, screws and nuts, and cartridge¹
- High limit: 18g combined weight of headshell, headshell wires, screws and nuts, and cartridge

Footnote 1: The Low and High Limits were deduced using a 1g tracking force and with the dustcover closed while playing. With the dustcover removed, the counterweight can be used up to 20g combined weight. If a higher tracking force is required, then the usable Low limit will be revised higher and the High limit weight will increase as well. For reference, the A-T headshell and the AT95E cartridge have a combined installed weight of 16g. The LP Tunes Zupreme headshell weighs 12g.

 

AUDIO-TECHNICA AT-LP120XUSB DIRECT DRIVE TURNTABLE (BLACK)

The latest update of the AT-LP120USB turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and is equipped with a USB output that allows direct connection to your computer. Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files. But in addition to the USB output, the turntable also comes with a detachable dual RCA output cable with ground wire and is equipped with a built-in selectable phono preamp so you can connect directly to your home stereo, whether it has a dedicated phono input or not.

The turntable features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal ½"-mount headshell and AT-VM95E Dual Magnet™ phono cartridge with 0.3 x 0.7 mil elliptical stylus. Audio-Technica has been a leader in high fidelity audio for more than 50 years, and this expertise shows in the versatile, high-performance AT-LP120XUSB direct drive turntable.

Audio-Technica AT-Lp120XUSB Turntable Features
- Experience the high-fidelity audio of vinyl Direct-drive, DC servo motor
○ Fully manual operation
○ Adjustable dynamic anti-skate control
○ Selectable 33/45/78 RPM speeds
○ Professional-grade anti-resonance, die-cast aluminum platter with felt mat
○ AT-HS6 universal ½"-mount headshell and AT-VM95E Dual Magnet™ phono cartridge with 0.3 x 0.7 mil elliptical stylus
○ AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
○ Balanced S-shaped tonearm with hydraulically damped lift control and lockable rest
○ Built-in switchable phono pre-amplifier for phono- or line-level output
○ Stroboscopic platter with speed indicator
○ Variable pitch control with quartz speed lock
○ Removable plug-type target light for easier cueing in low light
○ Damped base construction for reduced low-frequency feedback coloration
○ AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
○ Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)
○ Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

.: AUDIO-TECHNICA AT-LP240-USB DIRECT DRIVE TURNTABLE W/ USB & ANALOG OUTPUT :.

Built to deliver very high sound quality, the Audio-Technica AT-LP240-USB turntable utilizes a direct-drive high-torque 16-pole brushless DC motor for unwavering speed stability, and features a S-shaped tone arm with adjustable tracking force and anti-skate, removable cartridge mount, and a damped cast-aluminum platter with a felt slip mat. The turntables USB output allows direct connection to a computer without any special drivers, making it easy to transfer records to digital music files that can be played back on a portable audio device.

The Audio-Technica AT-LP240-USB plays back 33-1/3, 45 and 78 RPM records. Its built-in phono preamp enables the turntable to be connected to a wide variety of music and home entertainment systems, powered speakers, and to A/V receivers that do not include a dedicated phono preamp input. The turntable includes PC- and Mac-compatible Audacity software that converts the audio on a record to MP3, WAV or other format digital audio files.

.: Features
USB outputno special drivers required for direct connection to your computer
Direct drive high-torque multi-pole motor
Selectable 33/45/78 RPM speeds
Selectable internal stereo phono pre-amplifier
S-shaped tone arm assembly with:
Adjustable counterweight
Anti-skate adjustment
Tone arm height adjustment and lock
Tone arm lift with hydraulic action and lift lever
Tone arm rest with locking mechanism
Stroboscopic platter and speed accuracy indicator
Damped cast aluminum record platter with slip mat
Start/stop button
Removable stylus target light
45-RPM adapter
Adjustable feet for leveling
Removable dust cover
Dedicated ground lug for tone arm grounding

.: Details
Drive Method: Direct Drive Direct drive
Type: 3-speed, fully manual operation
Motor 16-pole, 3-phase, brushless DC motor
Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter: 332 mm dia. die-cast aluminum
Starting Torque: >4.5 kgf.cm
Braking System: Electronic brake
Wow and Flutter: < 0.1% WRMS (JIS WTD) with 33 RPM
Signal-to-Noise Ratio: > 55 dB (DIN-B)
Output Level Pre-amp: "PHONO": 2.5 mV nominal at 1 kHz, 5 cm/sec (HP-4005)
RIAA: 20-20kHz, +1/-3dB (In: 1.5mV 1kHz)
Pre-amp "LINE": 150 mV nominal at 1 kHz, 5 cm/sec (HP-4005)
USB Function: A/D, D/A - 16 bit 44.1 kHz or 48 kHz USB selectable;
Computer interface: USB 1.1 Compliant Windows XP or above or MAC OSX or above
Tone arm type: Static balanced S-shaped tone arm with detachable headshell
Effective arm length: 230 mm
Overhang: 15 mm
Height of tone arm adjustment range: 0-6 mm
Tracking error angle: Less than 3 degrees
Power Supply Requirements: 120V AC, 60 Hz
Power Consumption: 11W
Dimensions: 450.0 mm (17.72") W x 353.0 mm (13.90") D x 166.5 mm (6.56") H
Weight: 12.2 kg (26.9 lbs.)
Accessories Included: Slip mat; dust cover; platter; 45 RPM adapter; counterweight; headshell; power cord; USB cable; dual RCA (female) to 1/8" (3.5 mm) mini-plug (male) stereo adapter cable; dual RCA (female) to 1/8" (3.5 mm) mini-plug (female) stereo adapter cable; dual RCA (male) cable with integrated ground wire; stylus target light; Audacity software (CD)

AUDIO-TECHNICA  AT-LP2D   AT LP2D   ATLP2D TURNTABLE BELT REPLACEMENT

The AUDIO-TECHNICA AT-LP2D turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AUDIO-TECHNICA AT-LP2D  AT LP2D   ATLP2D TURNTABLE BELT REPLACEMENT

The AUDIO-TECHNICA AT-LP2D USBB turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.