Products

AUDIO REFLEX MR-120B   MR 120B   MR120B TURNTABLE BELT REPLACEMENT

The AUDIO REFLEX MR-120B turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter. 

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AUDIO REFLEX MR-125   MR 125    MR125 TURNTABLE BELT REPLACEMENT

The AUDIO REFLEX MR-125 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AUDIO REFLEX MR-1258   MR 1258   MR1258 TURNTABLE BELT REPLACEMENT

The AUDIO REFLEX MR-1258 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AUDIO REFLEX MR-125B   MR 125B   MR125B  TURNTABLE BELT REPLACEMENT

The AUDIO REFLEX MR-125B turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AUDIO REFLEX MR-140    MR 140   MR140 TURNTABLE BELT REPLACEMENT

The AUDIO REFLEX MR-140 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AUDIO RETROFLEX LT-76    LT 76    LT76  TURNTABLE BELT REPLACEMENT

The AUDIO RETROFLEX LT-76 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

The Audio Technica AT-770  AT 770   AT770  MISTER DISC turntable belt set features a long and short .turntable belt replacement

The Audio Technica AT-770 MISTER DISC turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here.

For upgrades and enhancements to sound quality and fidelity, please refer to the Related Products below.

AUDIO-TECHNICA AT-LP140XP DJ TURNTABLE - BLACK

Configured as the ultimate DJ turntable, The AT-LP140XP lets DJs deliver high-fidelity audio and professional DJ performance!

Upgrades

● High-torque servo motor with speed stabilization.

● Rubber Damped anti-resonance, mass-damped, die-cast aluminum platter with felt mat.

● Metal Bonded Deck.

● Mass Damped Chassis.

● Height Adjustable Tonearm for 14-21mm carts

● AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus.

● Provision for ground terminal to prevent humming

● Adjustable feet for precise leveling.

AUDIO-TECHNICA AT-L7 TOP OF THE LINE BELT DRIVE TURNTABLE
● Top quality turntable with finest materials and structures designed for highest performance around Audio-Technica's VM cartridge line
● 40 mm-thick MDF chassis damps vibration and limits low-frequency acoustical feedback
● Superb VM520EB Dual Moving Magnet Cartridge installed in a 10 g AT-HS10 headshell, stylus replaceable with any other six styli in the VM Line
● Precision J-shaped tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors, and includes an adjustable counterweight and anti-skate control. The height of the tone arm can be adjusted from 0 mm to 6 mm to accommodate a wide variety of cartridges.
● built-in switchable MM/MC phono/line preamp for connection to components with or without a dedicated phono

- Type: 2-speed, fully manual operation
- Motor: DC motor
- Drive Method: Belt drive
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable Platter: Polyoxymethylene
- Wow and Flutter: <0.08% WRMS (33 RPM) at 3 kHz
- Signal-to-Noise Ratio: >60 dB¹
- Output Level: Pre-amp “PHONO”: 4.5 mV nominal at 1 kHz, 5 cm/sec
- Pre-amp “LINE (MM)”: 280 mV nominal at 1 kHz, 5 cm/sec
- Input impedance: 100 Ohms
- Phono Pre-Amp Gain: MM: 36 dB nominal, RIAA equalized
- MC: 56 dB nominal: RIAA equalized
- MC Input sensitivity: 0.4 mV - Power Supply Requirements: 100 to 240 V AC, 50/60 Hz, 0.6 A max.
- Power Consumption: 5.5 W
- Dimensions: 450.0 mm (17.72") W x 352.0 mm (13.86") D x 157.0 mm (6.18") H
- Weight: 8.3 kg (18.30 lbs.), without dust cover
- Accessories Included: VM520EB Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; dust cover - Replacement Cartridge: VM520EB
- Owners Manual: https://www.audio-technica.com/cms/resource_library/literature/0deb7adb3852a581/at_lp7_um_v1_usa_en_171106.pdf

The Audio-Technica AT6091 Isolators are special anti-vibration rubber feet designed for use with audio and video high fidelity components such as CD and DVD players, turntables, amplifiers, pre amps, loudspeakers and video components. Placed under the cabinet of the chosen component, they dampen vibrations both on the vertical and horizontal plane and absorb the accompanying resonances that affect the sound quality of any high fidelity component. Each isolator has a load capacity of approximately 20 kg (44 lbs). With a set of 4 isolators, the load capacity is approximately 80 kg (176 lbs). The Audio-Technica AT6091 Isolators include transparent seals and protective sheets.

ATH-M20 Closed-back Dynamic Stereo Monitor Headphones

• Closed-back dynamic stereo headphones deliver exceptional clarity
• Rich bass response with extended high end
• 40 mm drivers with neodymium magnets and copper-clad aluminum wire voice coils
• Circumaural design ensures superior isolation
• Adjustable cushioned headband and lightweight design for maximum comfort
• 1/8" (3.5 mm) stereo connector and snap-on 1/4" (6.3 mm) adapter
• Ultra-flexible 10' coiled cable with left-side entry

ATH-M30 Closed-back Dynamic Stereo Monitor Headphones

• Exceptional clarity and sonic accuracy for mixing
• High power handling for tracking sessions
• Circumaural design ensures superior isolation
• 40 mm diameter drivers, neodymium magnets and CCAW voice coils
• Adjustable cushioned headband and lightweight design for maximum comfort
• OFC litz wire cable, convenient one-side exit
• Gold-plated 1/8" (3.5 mm) stereo connector with strain relief and professional screw-on 1/4" (6.3 mm) adapter

ATH-M3X Mid-size Closed-back Dynamic Stereo Headphones

• Specifically designed for digital program materials
• High-performance drivers and low-mass diaphragms
• Maximized power handling capability
• Excellent isolation and powerful bass
• 9.8' cable with 3.5 mm stereo mini-plug
• 1/4" (6.3 mm) phone plug adapter included

AUDIO-TECHNICA ATLP7 TURNTABLE BELT REPLACEMENT

AUDIO-TECHNICA AT-120Eb AT 120Eb AT120Eb CARTRIDGE

The AT120Eb moving magnet cartridge features Audio-Technica's Vector-Aligned Dual Magnet design and exclusive Paratoroidal Signal Generator.

● Its high performance and unique Paratoroidal signal generating system is composed of a unified, laminated coil core wound with a single piece of wire. Internal mechanical and electrical connections are eliminated, minimizing magnetic losses and ensuring better signal transfer.

● The PCOCC coil enables pure signal transmission because it does not have grain boundaries in the direction of transmission.

Extraordinarily crafted, the 120Eb phono cartridge provides musical enjoyment far beyond its price range. After about 100 hours of break-in, you'll enjoy its crystalline highs, cohesion, wide sound stage, and tight bass.

Audio Technica AT120EB Phono Cartridge Specifications
- Type: VM type (Dual Magnet) stereo cartridge
- Output voltage: 4.0mV
- Frequency response: 20 ~ 25,000Hz
- Channel balance @ 1kHz: 1.0dB
- Channel separation @ 1kHz/10kHz: 28/20dB
- Tracking Force: 1.0 - 1.8g (1.4g standard)
- Coil Impedance: 3.2 kΩ (1kHz)
- Direct Current Resistance: 800 Ω
- Load Impedance: 47 kΩ
- Coil Inductance: 490 mH (1kHz)
- Load Capacitance: 100 ~ 200pF
- Static Compliance: 35 × 10^-6cm/dyne
- Dynamic Compliance: 10 × 10^-6cm/dyne (100Hz)
- Stylus shape: 0.3 × 0.7 mil Nude Elliptical diamond
- Stylus construction: Nude round shank
- Cantilever: Aluminum pipe
- Vertical Tacking Angle: 20°
- Dimensions: H17.3 × W16 × D28.2 (mm)
- Weight: 6.5g
- Accessories included: Non-magnetic driver × 1, washer × 4, nut × 2, cartridge installation screws 5 mm × 2 and 10 mm × 2, hexagon nut × 2, brush × 1.