78 RPM Stylus

78 RPM STYLUS FOR NUMARK PT-01 PT 01 PT01 TURNTABLE

The 78 RPM stylus for the Numark PT-01 PT 01 PT01 turntable features a highly polished 3.0 mil diamond stylus designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use a LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

AUDIO-TECHNICA AT-VMN95SP STYLUS

3.0 mil conical replacement stylus for AT-VM95SP cartridge.

● 78RPM stylus specified for Audio-Technica AT-VM95 Series cartridges
● Excellent 78 RPM record harmonic detail reproduction
● 3.0 mil diamond for correct tracing 78 RPM record grooves
● Accurate sound reproduction of 78RPM recorded material
● Precision engineered and exquisitely crafted in Japan
● Genuine, unsurpassed, Audio-Technica stylus

SPECIAL NOTE: The AT-VMN95 replacement styli are made specifically for the VM95 Series cartridge body. The AT95E (and AT95EX) cartridge bodies are different from the VM95 Series cartridge body and their styli are NOT interchangeable as a result. LP GEAR produces a full line of compatible styli for the original and venerable AT95E. Please choose those to keep on enjoying your original AT95E cartridge. They are: LP Gear CFN95SE, LP Gear ATN95SE, LP Gear ATN95VL, LP Gear ATN95SLC, LP Gear ATN95SA, and the jaw-dropping, ultimate LP Gear ATN95MR.

GRADO 78C STYLUS (78 RPM STYLUS)

The Grado 78C stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

Resources
How to replace and install Grado stylus (PDF)
How to replace and install Grado stylus (JPG)

GRADO 78E STYLUS (78 RPM STYLUS)

Ships to US only

The Grado 78E needle stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

Resources
How to replace and install Grado stylus (PDF)
How to replace and install Grado stylus (JPG)

JICO 78 RPM REPLACEMENT FOR SHURE N70-3 N703 STYLUS

The 78 RPM replacement for the N70-3 stylus is equipped with a 3.0 mil polished diamond. This stylus is designed specifically for correct tracing of the wide grooves of 78 RPM records while providing minimum abrasion and maximum sound reproduction.

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus please contact us here

 

Beware of counterfeits! There is only one Jico distributor in the US, Canada and all of the Americas: LP Tunes. A Jico stylus comes in Jico packaging or with Jico US engraved on the stylus. All others are selling styli of unknown origin and quality. Contact us to verify the authenticity of the claimed Jico stylus before buying.

Beware of counterfeits! There is only one Jico distributor in the US, Canada and all of the Americas: LP Tunes. A Jico stylus comes in Jico packaging or with Jico US engraved on the stylus. All others are selling styli of unknown origin and quality. Contact us to verify the authenticity of the claimed Jico stylus before buying.

For enhancements to sound quality and fidelity please refer to the Related Products below.

JICO 78 RPM REPLACEMENT FOR SHURE SS-78E SS78E SS 78E STYLUS

The 78 RPM replacement for the SS-78E stylus is equipped with a 3.0 mil polished diamond. This stylus is designed specifically for correct tracing of the wide grooves of 78 RPM records while providing minimum abrasion and maximum sound reproduction.

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus please contact us here

Beware of counterfeits! There is only one Jico distributor in the US, Canada and all of the Americas: LP Tunes. A Jico stylus comes in Jico packaging or with Jico US engraved on the stylus. All others are selling styli of unknown origin and quality. Contact us to verify the authenticity of the claimed Jico stylus before buying.

For enhancements to sound quality and fidelity please refer to the Related Products below.

JICO 78 RPM REPLACEMENT FOR SHURE VN-78E VN78E VN 78E STYLUS

The 78 RPM replacement for the VN-78E stylus is equipped with a 3.0 mil polished diamond. This stylus is designed specifically for correct tracing of the wide grooves of 78 RPM records while providing minimum abrasion and maximum sound reproduction.

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus please contact us here

 Beware of counterfeits! There is only one Jico distributor in the US, Canada and all of the Americas: LP Tunes. A Jico stylus comes in Jico packaging or with Jico US engraved on the stylus. All others are selling styli of unknown origin and quality. Contact us to verify the authenticity of the claimed Jico stylus before buying.

For enhancements to sound quality and fidelity please refer to the Related Products below.

LP GEAR CERAPREME 78 STYLUS

The LP GEAR Cerapreme 78 stylus features a precision 3.0 mil highly polished diamond designed specifically for the correct tracing of 78 RPM records. Uplifted by a thin wall aluminum alloy cantilever, the Cerapreme 78 stylus summons the notes from the contour of 78 RPM grooves with exquisite musical expressiveness.

A very common misconception is that you can use a LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

For the best 33.3/45 RPM stylus refer to the Cerapreme Blue stylus within Related Products.

78 REPLACEMENT FOR AUDIO-TECHNICA ATN-3400 ATN 3400 ATN3400 NEEDLE STYLUS

The LP Tunes 78 RPM replacement for the ATN-3400 needle stylus is equipped with a 3.0 mil polished diamond. This stylus is designed specifically for correct tracing of the wide grooves of 78 RPM records while providing minimum abrasion and maximum sound reproduction.

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus please contact us here

Stylus Upgrade Options
Premium Upgrade: ATN95E
Superior Upgrade: ATN95VL
Ultimate Upgrade: ATN95SA

78 RPM REPLACEMENT FOR AUDIO-TECHNICA ATN-3472 ATN 3472 ATN3472 NEEDLE STYLUS

The LP Tunes 78 RPM replacement for the ATN-3472 needle stylus FEATURES a 3.0 mil polished diamond tip designed specifically for correct tracing of 78 RPM records while providing minimum abrasion and maximum sound reproduction. 

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus please contact us here

For enhancements to sound quality and fidelity please refer to the Products Options below.

LP TUNES 78 RPM REPLACEMENT FOR AUDIO-TECHNICA ATN-3600 ATN 3600 ATN3600 NEEDLE STYLUS

● 3.0 mil diamond for correct tracing 78 RPM record grooves
● Accurate sound reproduction of 78RPM recorded material
● Specified for AT3600L cartridge and similarly based models
● Precision engineered and exquisitely crafted in Japan
● LP GEAR® stylus - Above and beyond copies and generics

The LP Tunes 78 RPM replacement for the ATN-3600 needle stylus is equipped with a 3.0 mil polished diamond. This stylus is designed specifically for correct tracing of the wide grooves of 78 RPM records while providing minimum abrasion and maximum sound reproduction.

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus, please contact us here

For enhancements to sound quality and fidelity, please refer to the Products Options below.

78 REPLACEMENT FOR AUDIO-TECHNICA ATN-93 ATN 93 ATN93 NEEDLE STYLUS

The LP Tunes 78 RPM replacement for the ATN-93 needle stylus is equipped with a 3.0 mil polished diamond. This stylus is designed specifically for correct tracing of the wide grooves of 78 RPM records while providing minimum abrasion and maximum sound reproduction.

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus please contact us here

Stylus Upgrade Options
Premium Upgrade: ATN95E
Superior Upgrade: ATN95VL
Ultimate Upgrade: ATN95SA

78 REPLACEMENT FOR AUDIO-TECHNICA ATN-95E ATN 95E ATN95E NEEDLE STYLUS

The LP Tunes 78 RPM replacement for the ATN-95E needle stylus is equipped with a 3.0 mil polished diamond. This stylus is designed specifically for correct tracing of the wide grooves of 78 RPM records while providing minimum abrasion and maximum sound reproduction.

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus please contact us here

Stylus Upgrade Options
Premium Upgrade: ATN95E
Superior Upgrade: ATN95VL
Ultimate Upgrade: ATN95SA

78 RPM REPLACEMENT FOR CALIFONE 89T STYLUS

The LP Tunes 78 RPM replacement for the Califone 89T needle stylus is equipped with a 3.0 mil polished diamond. This stylus is designed specifically for correct tracing of the wide grooves of 78 RPM records while providing minimum abrasion and maximum sound reproduction. 

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠ If you are unsure if this is the correct stylus, please contact us here.

For enhancements to sound quality and fidelity, please refer to the Related Products below.

78 RPM REPLACEMENT FOR FISHER ST09D ST-09D STYLUS

The LP Tunes 78 RPM replacement for the Fisher ST09D needle stylus is equipped with a 3.0 mil polished diamond. This stylus is designed specifically for correct tracing of the wide grooves of 78 RPM records while providing minimum abrasion and maximum sound reproduction. 

The color of this stylus has changed over the years. Please be sure to compare your stylus with this stylus before ordering. Do not order this stylus if it looks different than the stylus that you have.

⚠️ If you are unsure if this is the correct stylus please contact us here

For enhancements to sound quality and fidelity please refer to the Related Products below.