Music Hall MMF-2.2 Turntable Improved

The new Music Hall MMF-2.2 MMF2.2 turntable offers several enhancements over the Music Hall MMF-2.1 by including the tonearm from the MMF5, new vibration damping feet and a lower resonant platform. It also now comes in georgeous gloss black to match the rest of the MMF line.

The Music Hall MMF-2.2 MMF2.2 is a complete turntable system including tonearm with the Music Hall Tracker cartridge mounted at the factory. At $449.00, it has no peer and is the best value audiophile quality turntable available in the market. Minimal set-up is required. In about 20 minutes you should be able to start listening to your records. The illustrated instructions are simple, clear and easy-to-follow.

It sounds quite good right out of the box. Its has a bit of brashness and sibilance that can be sometimes annoying. Also, it may lack verve and clarity. The LP Gear Rx9HE stylus overcomes these issues and lifts performance to a higher level of discernment. The LP Gear Rx9HE stylus offers a natural and refined tonal balance with vivid and graceful detail--music you can listen to forhours and hours.

The Music Hall MMF-2.2 turntable is a 2-speed (33 1/3 & 45 RPM) belt drive design of sheer simplicity. Bereft of adornment, its engineering is focused on critical componentsthe bearing, motor, tonearm, and isolation. It is a complete turnkey turntable system that can be easily assembled within 20 minutes. It is easy to own, operate and maintain so you can focus on playing your records and listening to music. It has the following distinctive qualities:

• The bearing is made from high quality, stainless steel sheathed in a bronze fitting. A Teflon thrust plate ensures a fluid and noise free operation. The bearing assembly comes pre-charged with lubricant.

• The 2-speed high-torque, AC-synchronous motor is decoupled from the turntable by a rubber spring suspension and four rubber dampers thus minimizing vibration.

• A rubber drive belt connects the motor to the non-resonant polymer sub platter.

• Precision high quality one piece alloy tonearm for structural integrity and superb tracing ability.

• The arm also has adjustable VTA for a damped arm lift and uses highly flexible internal wiring drawn from high purity copper.

• Special vibration damping feet

• High quality, gold-plated phono jacks

• Dynamically balanced 4.5 lb machined metal alloy platter provides rotational stability and minimizes wow.

• Cartridge factory installed correctly so no set-up and alignment is required.

• Gorgeous high-gloss piano black lacquer finish and handsome removable dustcover

• Supplied accessory: 45 RPM adaptor

• Excellent instruction manual
  
• Very easy assembly can be completed within 20 minutes
  
• One full-year factory warranty

Music to your ears. The retail price of the regular MMF-2.2 is $449.00. For the same price, we will provide you the LP Gear Improved MMF-2.2 turntable. We are providing for free the LP Gear Rx9HE stylus (retail value $64.90) for you to replace the factory installed stylus. The Rx9HE stylus offers natural sound, superior tone, spatial detail and clarity. You can keep the factory supplied stylus for back-up.

If you want to enjoy your records again or record them to CDs or MP3 and have been amazed by the high prices of high quality turntables, then the MMF-2.2 Improved is your solution.

Music Hall MMF-2.2 MMF2.2 Turntable Specifications:
Power supply: 110V/60Hz
Power absorption: 2 VA
Speeds: 33 1/3 rpm, manual commutation to 45 rpm
Deviation from nominal speed: +/- 0.9%
Wow and flutter: +/- 0.15%
Rumble max: -70 dB
Tracking force: 10-30 mN
Effective length of tonearm: 9 inches
Overhang: 0.67 inches
Platter diameter: 11.81 inches
Platter weight: 4.5 lbs.
Dimensions (w x d x h): 16.5 x12.5 x 4.5 inches
Weight of the unit (incl. packing material): 17 lbs

Note: Design and specifications are subject to change without notice.