Audio-Technica AT150SA Pre-mount

Audio-Technica AT150SA Pre-mount

SKU: AT150SASET

  • $389.00

Email me when back in stock

Will be in stock after
AUDIO-TECHNICA AT150SA CARTRIDGE PREMOUNT WITH HIGH DEFINITION HEADSHELL
- Audio-Technica AT150Sa cartridge premounted on world class HD Headshell

Audio-Technica AT150Sa with High Definition Headshell (HD) offers sterling sound quality and compatibility with turntables:
- LP Tunes High-Definition half-inch mount headshell
- Aerospace alloy for tensile strength and low resonance
- SOAR HD5 headshell wires for exceptional sound quality
- Aligned length 52 mm for use with many tonearms
- Alignment adjustable for extra precision and compatibility
- Free alignment protractor
- Total weight of 16.0g with Audio-Technica AT150Sa is suited to more turntables and their tonearms. There is no need to change the counterweight.

AT150Sa, AT150MLX, AT150ANV Vignette
The progenitors of the new AT150SA, the AT150MLX and AT150ANV cartridges offer exceptional accuracy and for the AT150ANV - supreme fidelity. Within their celestial universe, the AT150SA with its Nude Shibata stylus also administer delicacy. Graced with a Nude Shibata stylus on a tapered pipe aluminum cantilever, the AT150SA through technical expertise and artisanship lifts from the record grooves sublime music. Music you'll want to keep enjoying.

Audio-Technica AT150SA cartridge specifications
- Type: Moving Magnet VM Dual Magnet Stereo
- Frequency response: 10 ~ 25,000 Hz
- Output voltage: 4.0 mV (1kHz, 5 cm/sec.)
- Channel separation: 30 dB (1kHz)
- Output balance: 1.0 dB (1kHz)
- Tracking force: 1.0 ~ 1.8 g (1.4 g standard)
- Coil impedance: 3.2 kΩ (1kHz)
- DC resistance: 800 Ω
- Rec. load impedance: 47 kΩ
- Coil inductance: 490 mH (1kHz)
- Static compliance: 40 10-6 cm/dyne
- Dynamic compliance: 10 10-6 cm/dyne (100Hz)
- Stylus: Solid Shibata
- Cantilever: Aluminum, taper pipe
- Vertical tracking angle: 23
- Dimensions: 17.3(H) 17.0(W) 28.2(D) mm
- Weight: 8.0 g
- Accessories: Non-magnetic driver 1, non-magnetic mounting screws 5mm 2,8 mm 2, PCOCC lead wires 4, washer 2, nut 2, Brush 1.

Note: Specifications are subject to change without notice.

____________________________________

Music listening equipment: Graham Slee Reflex M phono preamp, Graham Slee Elevator EXP headamp, Denon AU-300LC Step-up transformer, Graham Slee Proprius mono amps, Odsssey Kismet Reference Amp, Quicksilver Silver 88 mono amps, Roadrunner Digital Turntable Tachometer, Sota Sapphire turntable, Audience SE Phono Cable, Audience Ohno speaker cables, Rogers LS3/5A speakers, Audience ClairAudient 1+1 Loudspeakers, Krell LAT 2 speakers, Yamaha NS1000M speakers, LP Tunes CF3600LE cartridge, Ortofon 2M Red cartridge, Ortofon 2M Blue cartridge, Ortofon 2M Bronze cartridge, Ortofon 2M Black cartridge, Rega Carbon cartridge, Supex SD 901 Super cartridge, Denon DL-103 cartridge, Denon DL-110 cartridge, Grace F-9E cartridge.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
j
joe (Los Angeles, US)
AT pre-mount stylus

Excellent, absolutely recommend to all you vinyl lovers.


JOIN OUR NEWSLETTER

Stay in the loop with LP Tunes sales, promotions & deals!

★ Reviews ★

Let customers speak for us

3736 reviews
94%
(3498)
6%
(207)
0%
(14)
0%
(4)
0%
(8)

Stylus for Realistic LAB-340 LAB 340 LAB340 turntable

J
Replacement for Kenwood N-41E N41E stylus
James Smith (Charlotte, US)
Perfect stylus

Fit properly and sounds great!

J
Replacement for ADC RZL stylus
Jean-Marc WELLENS (Ath, BE)

top

V
Stylus for Stanton 981HZS cartridge
Volodymyr Kandya (Brooklyn, US)
working perfect

best sound from MM. Perfect

b
JICO SAS replacement Shure N-95ED stylus
bradley oswald (Rahway, US)
Old records seem new again

Moving to the Jico n95 SAS/B from the original m95 elliptical stylus makes one want to listen to the emtire record collection again. Even with my full range open baffle setup I am now getting the high end sparkle that one expects. Pairs up perfectly with open baffle setup.

Improved the sound.

Thank you!

Hope I actually receive it…still waiting 😞

M
KYOCERA PL-601 Turntable Replacement Belt
Mary Hause (Bonney Lake, US)
Tada!

I shy away from electronics problems, and I've been avoiding a peek at wiring difficult to get to, to see if that was the reason my turntable hasn't worked for a couple years or more.
I finally took the pad off the platter abd removed tge platter to find the belt was disintegrated! Ordered a new one, put it on, abd tada! My turntable works!
Next up: a new stylus, perhaps.