Audio-Technica AT-440ML Phono Cartridge

SKU: ATC05OR

  • $0.00

Email me when back in stock

Will be in stock after

AUDIO-TECHNICA AT-440ML PHONO CARTRIDGE

Discontinued, see related products

Original AT-440ML/OCC cartridge, sound quality, extended frequency and performance

Audio-Technica is the world leader in phonograph cartridges. Its cartridges are used by many renowned companies as original installed equipment and under private label. It is one of the last manufacturers to offer a full line of phono cartridge products that meet the needs of many budget segments, turntable/tonearm requirements and performance levels.

Audio-Technica's moving magnet cartridge design is patented and delivers "Practically Identical to the Cutter Head" performance. Instead of using a single, large magnet like other cartridge manufacturers, Audio-Technica's patented Vector-Aligned Dual Magnet design positions two tiny magnets 90 degrees apart. These magnets are positioned directly in line with the two groove walls and each magnet incorporates a separate, independent coil structure. This low magnet mass and geometry allows exact translation of record groove motion into matching electrical signals, ensuring excellent channel seperation, extended frequency response and superior tracking.

Each Audio-Technica cartridge is hand-assembled with tolerances held to mere thousandths of an inch. Stringent quality control assures that tolerances and performance criteria are maintained for each product. This attention to every micro detail in design, construction and final assembly results in superior phono cartridges that are delightfully musical and musically accurate.

With the AT-440ML phono cartridge, Audio-Technica delivers musical excellence in an affordable audiophile cartridge that rightfully should be compared with moving magnets costing many times its price. The Audio-Technica AT-440ML's excellence lies in its advanced technology, design and materials uniquely available to Audio-Technica because of its deep technical history and production capabilities.

Audio-Technica AT-440ML Phono Cartridge Specifications

  • Frequency Response (Hz): 5-32,000
  • Output Voltage: (mV, 1kHz,5cm/sec: 5.0
  • Channel Balance: (dB, 1kHz: 0.75
  • Channel Separation (dB, 1kHz: 30
  • Dynamic Compliance (x10-6 cm/dyne): 10
  • Static Compliance (x10-6 cm/dyne): 40
  • Stylus Type: 0.12 mil nude square Micro-linear
  • Tracking Force Range: 1.0 - 1.8 g
  • Tracking Force Recommended: 1.4 g (14 mN)
  • Vertical Tracking Angle: 20
  • Coil Impedance @ 1kHz: 3.2k ohm
  • Coil Inductance @ 1kHz: 490 mH
  • Recommended Load Resistance: 47k ohms
  • Color: Black/Violet
  • Weight: 6.5 g
  • Dimensions: 17.3l x 16w x 28h
  • Stylus Replacement: Audio-Technica ATN-440ML
  • Accessories Included: Screwdriver, Screws, Nuts, Headshell Wires

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

JOIN OUR NEWSLETTER

Stay in the loop with LP Tunes sales, promotions & deals!

★ Reviews ★

Let customers speak for us

3934 reviews
94%
(3689)
5%
(213)
0%
(17)
0%
(4)
0%
(11)
looking for turntable belt replacement

I needed a replacement for my audio Linear TD4001 turntable. It is over 40 years old and the belt is original. I haven't played it in over 20 years and just recently tried to play an LP and the belt had lost it. didn't know if I could find a replacement but surprise surprise LP tunes had a factory fresh belt! I got it in only a couple of days and just today was able to play the white album. sound was perfect for an old record. LP tunes rocks!

D
AWA E-6906 turntable replacement belt
Derek Martin (Adelaide, AU)
AWA E-6906 turntable replacement belt?

I recommend LP Tunes, as the order and delivery of the requested parts went without a problem.
Great service, thank you.

M
LP Gear X3 Record Cleaning & Anti-Static Brush
Matthew McDonald (Woodbury, US)

LP Gear X3 Record Cleaning & Anti-Static Brush

Better than I thought

This JICO nude elliptical stylus is super good. I replaced the stylus on my Shure M44-7 which is more of a DJ cartridge and I didn't care much for a conical/spherical one that was on it. Everyone I talked to about a change recommended the N55 for it. It was a little pricey, and usually I'll buy a new cartridge instead of chance something I'm not familiar with, but I bit the bullet and ordered the N55 from the recommendations. To my surprise, it's one of the better sounding carts I have and that's saying a lot as I use Grado and Ortofon both in MM, and a Denon MC cart. Even not broken in, I was really impressed with it. So much so, I may resurrect my on M99E that's on one of my Dual's with a Jico nude stylus. This JICO stylus I bought is on my vintage Pioneer PL 518.

M
ARISTON RD-11 SQUARE Turntable Replacement Belt
Michel Carpentier (Saint-Thomas, CA)

Excellent belt fast shipping

LP Tunes N91VL upgrade for Shure N91ED N91E N93E 2225 stylus

2204 Wurlitzer turntable belt

Belt fits perfect

ViVid Line replacement for Shure m97xe cartridge

The stylus is amazing. The original stylus needed some adjustments. It was a bit harsh in the mid to higher. The new ViVid Line is awesome. No need to EQ needed. Everything pops out and doesn't cause fatigue. Nice lows, mids, and highs. If you what to replace/ update you Shure m97xe, this is it. Maybe a bit pricey but well worth it.