jensen

78 RPM STYLUS FOR JENSEN JTA-220 JTA 220 JTA220 TURNTABLE

The 78 RPM stylus for the Jensen JTA-220 JTA 220 JTA220 turntable features a 3.0 mil polished tip designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. Do not order this stylus. Instead, look at the existing cartridge and stylus and provide us the mark and info printed on them. Photos will also be helpful.

78 RPM STYLUS FOR JENSEN JTA-300 JTA 300 JTA300 TURNTABLE

The 78 RPM stylus for the Jensen JTA-300 JTA 300 JTA300 turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

78 RPM STYLUS FOR JENSEN JTA-380 JTA 380 JTA380 TURNTABLE

The 78 RPM stylus for the Jensen JTA-380 JTA 380 JTA380 turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

78 RPM STYLUS FOR JENSEN JTA-450 JTA 450 JTA450 TURNTABLE

The 78 RPM stylus for the Jensen JTA-450 JTA 450 JTA450 turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

78 RPM STYLUS FOR JENSEN JTA-460 JTA 460 JTA460 TURNTABLE

The 78 RPM stylus for the Jensen JTA-460 JTA 460 JTA460 turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, do not order the above stylus. Instead, look at the existing cartridge and stylus and provide us the mark and info printed on them. Photos will also be helpful.

78 RPM STYLUS FOR JENSEN JTA-470 JTA 470 JTA470 TURNTABLE

The 78 RPM stylus for the Jensen JTA-470 JTA 470 JTA470 turntable features a 3.0 mil polished tip designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. Do not order this stylus. Instead, look at the existing cartridge and stylus and provide us the mark and info printed on them. Photos will also be helpful.

78 RPM STYLUS FOR JENSEN JTA-475 JTA 475 JTA475 TURNTABLE

The 78 RPM stylus for the Jensen JTA-475 JTA 475 JTA475 turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

78 RPM STYLUS FOR JENSEN JTA-498A JTA 498A JTA498A TURNTABLE (2 KNOBS)

The 78 RPM stylus for the Jensen JTA-498A JTA 498A JTA498A turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

78 RPM STYLUS FOR JENSEN JTA-498B JTA 498B JTA498B TURNTABLE

The 78 RPM stylus for the Jensen JTA-498B JTA 498B JTA498B turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

JENSEN JTA-460 JTA 460 JTA460 TURNTABLE BELT

The Jensen JTA-460 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

 

LP TUNES 78 RPM STYLUS FOR JENSEN JTA-230 JTA 230 JTA230 TURNTABLE

The 78 RPM stylus for the Jensen JTA-230 JTA 230 JTA230 turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.

LP TUNES 78 RPM STYLUS FOR JENSEN JTA-410 JTA 410 JTA410 TURNTABLE

The 78 RPM stylus for the Jensen JTA-410 JTA 410 JTA410 turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.

LP TUNES 78 RPM STYLUS FOR JENSEN JTA-420 JTA 420 JTA420 TURNTABLE

The 78 RPM stylus for the Jensen JTA-420 JTA 420 JTA420 turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.

LP TUNES 78 RPM STYLUS FOR JENSEN JTA-980 JTA 980 JTA980 TURNTABLE

The 78 RPM stylus for the Jensen JTA-980 JTA 980 JTA980 turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

● 3.0 mil diamond tip for correct 78RPM record playing
● Precision faceted for tracing accuracy
● Made in Japan

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.