shure

The Shure N-44C N44C needle stylus features a highly polished conical diamond for long playing life and good rendition of voice and music.

The Shure N-70B N70B needle stylus features a highly polished conical diamond for long playing life, high reliability and good reproduction of recorded voice and music.

The Shure N-70BX N70BX needle stylus features a polished diamond designed for more effective tracing of record grooves. It results in better musical accuracy, tonal balance and sound quality.

The Shure N-77 N77 needle stylus features a highly polished spherical diamond for long playing life, reduced record wear, accurate tracing of record grooves and good reproduction of voice and music.

For an alternative stylus replacement, refer to the Related Products.

The Shure N-92E N92E needle stylus is designed for the Shure M-92E M92E phono cartridge and other specified models. The stylus features a highly polished elliptical diamond for superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products.

SHURE N-94E N 94E N94E NEEDLE STYLUS

The Shure N-94E N94E needle stylus for the Shure M94E and Shure MP94E phono cartridges features a highly polished special elliptical diamond for excellent tracing of record grooves. It results in very high accuracy and faithful reproduction of voice and music.

The Shure N-96LT N96LT needle stylus features a highly polished diamond for better tracing of the record grooves, thereby providing improved reproduction of vocals and music.

SHURE N-WHLB NEEDLE STYLUS FOR SHURE WHITELABEL CARTRIDGE

Out of stock. Please see the 100% compatible Jico N-WHLB SD DJ Replacement For Shure N-WHLB Stylus ($68.00).

The Shure N-WHLB needle stylus is designed specifically for use with the Shure WHLB Whitelabel phono cartridge.

Shure N-WHLB Needle Stylus Specifications
- Output voltage @ 1kHz,5cm/sec: 6mV RMS
- Recommended load: 47k ohms in parallel with 250 pf
- Typical Tracking Force: 2 grams
- Tracking force: 1.5-3 grams
- Stylus cantilever: Shure type I - low mass, heat-treated aluminum alloy / tubular, 1 mil wall thickness/30 mil diameter
- Stylus tip: Spherical
- Frequency response: 20Hz-20kHz
- Stylus color: Dark Blue

N-104E N104E LP GEAR NEEDLE STYLUS
-Original N104E stylus for original performance and sound quality

Out of stock. See the compatible needles in the description below, or in the Related Items section near the bottom of the page. 

Made by Shure for originalexcellence, the N-104E N104E stylus features a highly polished special bi-radial diamond with a .0002 x .0007 inch scanning radii for very high tracing accuracy. It results in excellent reproduction of voice, music and harmonics.

Upgrade Stylus
- Similiar version: LP Tunes Elliptical Replacement for the Shure N104E
- Upgrade stylus: LP Tunes Vivid Line N104VL Replacement for the Shure N104E & N110HE Stylus
- Ultimate upgrade stylus: Jico SAS Upgrade Replacement for N104E & N110HE Stylus

SHURE N-15 N15 NEEDLE STYLUS

Out of stock. Please see the 100% compatible LP Tunes Vivid Line Replacement for the Shure N-15 Stylus ($128.98).

The Shure N-15 N15 needle stylus features a hyperelliptical diamond for superior tracing of LP record grooves and excellent sound quality and harmonics. The Shure N-15 stylus can be used as an upgrade and higher sound quality replacement for the Shure N-11, N-12, N-13 and N-14 styli.

SHURE N25C NEEDLE STYLUS FOR SHURE M25C CARTRIDGE

Out of stock. We will likely never see this product again. If you are needing a DJ solution, please see the JICO DJ Replacement for the Shure N25C-Z, N35C, N35X, and N35S for the Shure M25C, M35C, M35S, M35X, and Others ($73.00). If you are looking for a listening-only version, see the Jico Replacement for the Shure N44G-X and Others ($26.10).

The Shure N25C needle stylus for the Shure M25C phono cartridge features a highly polished conical diamond for long playing life and good rendition of voice and music.

Shure N25C Stylus Specifications
- Frequency response: 20Hz-20kHz
- Output voltage @ 1kHz,5cm/sec: 5.0 mV RMS
- Stereo Channel Balance: Within 2dB
- Typical Tracking Force: 3 grams
- Tracking force: 1.5-3.0 grams
- Stylus cantilever: Shure type I - low mass, heat-treated aluminum alloy / tubular, 1 mil wall thickness/30 mil diameter
- Stylus tip: Polished natural diamond spherical, 0.7 mil radius
- Replacement stylus 33.3/45 RPM Playback: N25C (see Related Products)
- Stylus color: Red
- Replacement stylus 78 RPM RPM Playback: N78S (see Related Products)
- Stylus color: Green

SHURE N32-3 NEEDLE STYLUS FOR 78RPM RECORD PLAYING

The Shure N32-3 is the 78 RPM stylus for the Shure M31, M32 and M32-3 phono cartridges. The stylus features a 2.5 mil polished diamond designed specifically for the correct tracing of 78 RPM record grooves. It's use results in minimal groove wear and accurate rendition of voice and music.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

Shure N32-3 Stylus Specifications
- Type: Moving magnet
- Output voltage: 5.5mV
- Frequency response: 20Hz-18.5 kHz
- Load impedance: 47k ohms
- Inductance: 720 mH
- DC Resistance: 630 ohms
- Stylus type: Spherical .0025 inch radius
- Stylus replacement: User replaceable
- Compliance: 10.0 x 10^-6 Vertical, Horizontal cm per dyne
- Tracking force: 2.5 - 5.0 g

The Shure N35S needle stylus is specifically designed for the Shure M-35S M 35S M35S phono cartridge.

SHURE N35X NEEDLE STYLUS FOR SHURE M-35X CARTRIDGE

Out of stock. We will likely never see this product again. If you are needing a DJ solution, please see the JICO DJ Replacement for the Shure N25C-Z, N35C, N35X, and N35S for the Shure M25C, M35C, M35S , M35X, and Others ($73.00). If you are looking for a listening-only (hi-fi) version, see the Jico Replacement for the Shure N44G-X and Others ($26.10).

The Shure N35X needle stylus is specifically designed for the Shure M-35X M 35X M35X phono cartridge.

The Shure N35X stylus for the Shure M44GX phono cartridge features a highly polished conical diamond for long playing life and good rendition of voice and music.