dual

LP TUNES REPLACEMENT FOR DUAL DN 167 DN-167 DN167 78 RPM STYLUS
- For 78 RPM Records

The LP Tunes replacement Dual DN-167 stylus is the 78 RPM replacement for the Dual OM and OMB series, and the ULM 65, ULM 66 and ULM 68 phono cartridges.

LP TUNES REPLACEMENT FOR DUAL DN 10 DN10 STYLUS

The LP Tunes replacement for Dual DN 10 DN-10 DN10 features a highly polished elliptical diamond for excellent tracing of record grooves, thus providing very accurate rendition of voice and music. The stylus is made in Japan by one of the most reputable replacement stylus manufacturers in the world.

Upgrade Options
- For a stylus replacement that offers higher fidelity and musically compelling sound quality, refer to Related Products.

LP TUNES REPLACEMENT FOR DUAL DN-149S DN 149S DN149S STYLUS

The LP Tunes replacement for the Dual DN-149S DN149S stylus features a highly polished and precision profiled conical diamond tip for long playing life, reduced record wear, and good reproduction of recorded material.

For stylus replacements that offer higher fidelity and improved sound quality refer to Related Products.

LP TUNES REPLACEMENT FOR DUAL DN-160 DN160 STYLUS

The LP Tunes replacement for the Dual DN-160 DN160 stylus features a highly polished special conical diamond for long playing life, reduced record wear and good rendition of voice and music.

LP TUNES STYLUS FOR DUAL M-20E M20E CARTRIDGE

The LP Tunes stylus for the Dual M-20E M20E phono cartridge features a highly polished special elliptical diamond for excellent tracing of record grooves. It results in superb sound quality, very high accuracy and excellent rendition of voice and music.

LP TUNES STYLUS FOR DUAL TKS-236 TKS 236 TKS236 CARTRIDGE

The LP Tunes DN-236 DN236 stylus for the Dual TKS 236 features a highly polished conical diamond for long playing life, reduced record wear and good reproduction of recorded material.

Do not order the above stylus if it looks different from what you have. Instead, take a look at the info and marking on the existing cartridge and stylus and provide these to us. We need the brand and model number. Photos will also be helpful.

If the cartridge is missing or you prefer a new cartridge, please contact us for recommended replacement cartridges.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.

STYLUS FOR DUAL ULM-60E ULM60E CARTRIDGE

The Ortofon Dual DN-152E DN152E needle stylus is used as an updated stylus replacement for the Dual ULM-60E ULM60E phono cartridge.

LP TUNES REPLACEMENT STYLUS FOR DUAL ULM-63E ULM63E CARTRIDGE

The LP Gear stylus for the Dual ULM-63E ULM63E phono cartridge features a highly polished special elliptical diamond for superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products below.

ORTOFON DUAL DN150E STYLUS FOR DUAL ULM-55E ULM55E CARTRIDGE

The Ortofon Dual DN-150E DN150E needle stylus is used as an updated stylus replacement for the Dual ULM-55E ULM55E phono cartridge.

The replacement for the Dual DN-105 DN105 stylus features a highly polished conical diamond for long playing life, high reliability and good reproduction of recorded material. The color of the stylus varies.

The original manufacturer replacement for the Dual DN-110 DN110 needle stylus is used with the highly acclaimed low-output moving coil Dual MCC-110 MCC110 phono cartridge. The stylus features a nude elliptical diamond with a .0003 x .0007 inch scanning radii for excellent tracing of record grooves, long playing life and exceptional reproduction and rendition of voice, music and harmonics. The stylus assembly may be disconnected and replaced more than 2,000 times with no appreciable increase in output noise.

Dual DN110 Stylus Specifications
- Frequency response: 15Hz-50kHz
- Output voltage @ 1kHz,5cm/sec.: 0.4mV
- Channel separation @ 1kHz: Minimum 30dB
- Channel balance @ 1kHz: Within 1dB
- Tracking force: 1.2-1.8g (Nominal force 1.5 g)
- Dynamic compliance: 8.5 x 10-6 cm/dyne (100 Hz)
- Static compliance: 32 x 10-6 cm/dyne
- Load resistance: >10 ohms
- Load capacitance: 100-200 pf
- Stylus: 0.15 mm nude square, 0.3 x 0.7 mil elliptical diamond

The original manufacturer replacement for the Dual DN-120 DN120 needle stylus is used with the highly acclaimed low-output moving coil Dual MCC-120 MCC120 phono cartridge. The stylus features a nude elliptical diamond with a .0003 x .0007 inch scanning radii for excellent tracing of record grooves, long playing life and exceptional reproduction and rendition of voice, music and harmonics. The stylus assembly may be disconnected and replaced more than 2,000 times with no appreciable increase in output noise.

Dual DN120 Stylus Specifications
- Frequency response: 15Hz-25kHz
- Output voltage @ 1kHz,5cm/sec.: 2mV
- Channel separation @ 1kHz: Minimum 29dB
- Channel balance @ 1kHz: Within 1dB
- Tracking force: 1.4-1.8g (Nominal force 1.5 g)
- Static compliance: 32 x 10-6 cm/dyne
- Load resistance: 47k ohms

The replacement for the Dual DN-140 DN140 stylus is designed for the Dual ULM-140S ULM140S phono cartridge. It features a highly polished conical diamond for long playing life, reduced record wear and very good fidelity to the grooves.

REPLACEMENT FOR DUAL DN-140E DN140E STYLUS 

The Dual DN-140E DN140E stylus is a discontinued stylus. As updated replacement we offer the musically adept Dual DN-150E DN150E stylus featuring a precision elliptical diamond for long playing life and harmonically detailed and rich sound quality. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

The replacement for the Dual DN-140S DN140S stylus is designed for the Dual TKS 40 S and ULM 40 S phono cartridge. It features a highly polished conical diamond for long playing life, reduced record wear and very good fidelity to the grooves.