numark

The 78 RPM replacement for the Numark GT-RS GTRS stylus features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music.

A very common misconception is that you can use a LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

The 78 RPM stylus for the Numark PT-01 PT 01 PT01 turntable features a highly polished 3.0 mil diamond stylus designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use a LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

The 78 RPM stylus for the Numark PT-01USB PT 01USB PT01USB turntable features a highly polished 3.0 mil diamond stylus designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use a LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

The 78 RPM stylus for the Numark TT-USB TT USB TTUSB turntable features a highly polished 3.0 mil diamond stylus designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use a LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

The Numark TTi-USB TTi USB TTiUSB turntable was fitted with a phono cartridge and a needle stylus. A photo of the stylus replacement is supplied above. The stylus features a highly polished 3.0 mil diamond designed for playing 78 records. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

To maintain the playback fidelity of your 78 record you really need to use a stylus designed for 78 RPM records. A very common misconception is that you can use a LP stylus for playing 78 records. This is one quick and sure way to damage the 78 record grooves. Moreover, the LP stylus is much narrower than the 78 record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

The replacement for the Numark GT-RS GTRS stylus is used with the Numark Groove Tool phono cartridge. The stylus features a highly polished .0003 x .0007 inch radii special elliptical diamond for superior extraction of groove information. It results in finer detail and superb rendition of voice and music - excellent for listening and recording music. The stylus is made in Japan by a world-class manufacturer with a reputation for crafting musically excellent and high-quality replacement styli.

LP TUNES STYLUS FOR NUMARK PT-01 SCRATCH PT 01 SCRATCH PT01 SCRATCH TURNTABLE

The Numark PT-01Scratch PT 01Scratch PT01Scratch turntable was fitted with a phono cartridge and a needle stylus. A photo of the stylus replacement is supplied above. The stylus features a highly polished conical diamond for long playing life and good rendition of voice and music. The color of the stylus may vary.

Upgrade Options
- For upgrade stylus and accessories that enhance sound quality and fidelity, refer to Related Products.

NUMARK PT-01  PT 01  PT01 TURNTABLE BELT REPLACEMENT

The NUMARK PT-01 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter. 

If you are unsure if this is the correct belt, please use our free belt matching service here.

For upgrades and enhancements to sound quality and fidelity, please refer to the Related Products below.

NUMARK TT-1510  TT 1510   TT1510 TURNTABLE BELT REPLACEMENT

The NUMARK TT-1510 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter. 

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

NUMARK TT-1550   TT 1550    TT1550 TURNTABLE BELT REPLACEMENT

The NUMARK TT-1550 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter. 

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

NUMARK TT-1600  TT 1600    TT1600 TURNTABLE BELT REPLACEMENT

The NUMARK TT-1600 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter. 

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

NUMARK TT-1700  TT 1700  TT1700 TURNTABLE BELT REPLACEMENT

The NUMARK TT-1700 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter. 

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

NUMARK TT-USB TT USB TTUSB TURNTABLE BELT REPLACEMENT

The Numark TT-USB turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter. 

If you are unsure if this is the correct belt, please use our free belt matching service here.

For upgrades and enhancements to sound quality and fidelity, please refer to the Related Products below.

The TT250USB is a professional direct-drive turntable suited to heavy-duty DJ and music playback duties. Its quartz-controlled direct-drive motor delivers virtually perfect speed accuracy when playing back records, and its high torque motor provides the ideal amount of resistance ' and feel for scratching effects. We’ve got the goods. Right away.

An S-shaped tonearm with anti-skating control and damped cuing ensures precise tracking of the record’s grooves with minimal error, so the sound is always clean and clear. A rugged, high-quality magnetic cartridge comes pre-mounted and perfectly aligned in the headshell, so you’re ready for action, right out of the box. Those days of fumbling with tiny cartridge mounting screws and alignment gauges are gone—let the other guys struggle with that! Not here. Making your life easier. And more fun.

The TT250USB converts analog records to digital files via the USB connection to the computer (USB cable software download card included). Other thoughtful touches include adjustable height support feet, a 1/8-inch input for remote start when using a mixer that can provide remote start capability and a target light that illuminates the record under dim lighting conditions.

FEATURE SET
● Quartz-controlled direct drive motor for virtually perfect speed accuracy
● Instant torque: 2.0 kgfcm
● Die-cast aluminum platter for rock-solid stability (.09% wow & flutter)
● S-shaped tonearm ensures precise tracking of record grooves
● Includes pre-mounted Numark Groove Tool magnetic cartridge
● Pitch Fader and Pitch-Bend controls customize the pitch for a perfect mix
● Pitch adjustment range ±10%
● Damped cueing lever raises and lowers tonearm
● 33 1/3 and 45 RPM speeds and selectable 115/230V operation
● Converts records to digital files with USB cable connection to computer
● 1/8-inch input for remote start with compatible mixers
● Attached stereo line-out RCA cable
● Weight: 22 lbs

NUMARK TTi-USB   TTi USB  TTiUSB TURNTABLE BELT REPLACEMENT

The NUMARK TTi-USB turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter. 

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.