Audio-Technica replacement stylus for Audio-Technica AT-120Ea cartridge

ATN120E NSS/e LP TUNES UPGRADE STYLUS FOR AUDIO-TECHNICA ATN120E STYLUS

The Nude Schwarz stylus (NSS) raises the bar in stylus performance. For over half a century, the traditional way to craft a stylus, which carries on still today, is to bond the stylus tip to a crown (metal shank) that in turn is bonded to the cantilever. The additional mass, and a different material element in between the diamond tip and cantilever, cause some loss of nuance in transmitting groove modulation from the tip to the cantilever. With the Schwarz edition, a nude diamond stylus (a whole diamond) is inserted, fastened and/or glued directly to the cantilever - banishing the need for the crown (metal shank).

Thus, you can hear higher fidelity and exhilarating sound quality in every NSS stylus that you install in your cartridge! The unencumbered polycrystalline diamond tip (for toughness and longer-playing life) directly traces the grooves for optimal retrieval of record groove.

AUDIO-TECHNICA VMN30EN STYLUS
- Genuine, unsurpassed original, 100% authentic stylus by Audio-Technica

Audio Technicas VMN30EN stylus for the Audio Technica VM530EN phono cartridge features a 0.3 x 0.7 mil elliptical nude stylus follows the record grooves with more precision while providing lower distortion.

Audio-Technica VMN30EN Stylus Specifications
- Frequency response: 20Hz-25kHz
- Output voltage @ 1kHz,5cm/sec.: 4.5mV
- Channel balance: 1.5dB
- Channel separation @ 1kHz: 27dB
- Stylus type: 0.3x0.7mil Nude Elliptical
- Cantilever: Aluminum pipe
- Tracking force range: 1.8-2.2g
- Tracking force recommended: 2.0g
- Color: Yellow

AUDIO-TECHNICA VMN40ML STYLUS
- Genuine, unsurpassed original, 100% authentic stylus by Audio-Technica

Audio Technicas VMN40ML stylus for the Audio Technica VM740ML phono cartridge features a MicroLine nude stylus for extremely accurate grove tracking which extends record life and produces distinct audio reproduction.

Audio-Technica VMN40ML Stylus Specifications
- Frequency response: 20Hz-27kHz
- Output voltage @ 1kHz,5cm/sec.: 4.0mV
- Channel balance: 1.0dB
- Channel separation @ 1kHz: 28dB
- Stylus type: 2.2x0.12mil Nude MicroLine
- Cantilever: Aluminum tapered pipe
- Tracking force range: 1.8-2.2g
- Tracking force recommended: 2.0g
- Color: Red

AIN440MR LP TUNES STYLUS REPLACEMENT FOR AUDIO-TECHNICA VMN40ML STYLUS

● High-Grade AIN440MR stylus replacement for for Audio-Technica VMN40 stylus
● Made by master artisans perfecting works of art with each stylus
● Special precision polished nude Micro Ridge diamond tip for supreme fidelity
● MicroRidge tip dimensions: 2.5µm × 75µm
● Sound quality and performance beyond current production substitutes
● Low-mass alloy cantilevered fulcrum for groove tracing accuracy and fidelity
● Weight: 0.4 gram
● Tracking force range: 1.8 ~ 2.2 g (2.0 g standard)
● LP GEAR® stylus - Above and beyond copies and generics

The AIN440MR stylus is the inspired replacement conceived by LP Tunes for the Audio-Technica VMN40ML stylus. The AIN440MR features a high-performance capability, making it an excellent upgrade stylus for other Audio-Technica styli that use the same form factor. The stylus features a MicroRidge diamond for superlative performance with less wear and distortion than elliptical or conventional linear contact styli. The small curving rate of the stylus enables it to track and playback the inner part of the record groove that other styli can hardly maintain. Accordingly, the stylus has a much longer average playing life.

LP Tunes AIN440MR Stylus Details
- Type: VM
- Tracking force: 1.8 ~ 2.2 g (2.0 g standard)
- Stylus: Nude MicroRidge (2.5µm × 75µm)
- Cantilever: Aluminum alloy pipe
Note: Specifications are subject to change without notice.

AIN50SS LP GEAR SUPERB SHIBATA STYLUS
- Superb Shibata stylus for Audio-Technica AT440MLa, AT440Mlb, AT150MLX, AT150SA, VM750SH, and compatible cartridges

The Audio-Technica AT150MLX is a highly rated cartridge that has been discontinued and superseded by the VM750SH - a victim of the consumer electronics product life cycle where the product life cycle is around 2-3 years which means a product has to be revised or updated every two years or so. On one side, this is beneficial to the industry and consumers since it forces constant research and innovation. On the other hand, it is wasteful and counterproductive. This fosters short-term quality and product thinking - products that have a short-term life on the shelf. They break or sound old after a few years!. On one side, this is beneficial to the industry and consumers since it forces constant research and innovation. On the other hand, it is wasteful and counterproductive. This fosters short-term quality and product thinking - products that have a short-term life on the shelf. They break or sound old after a few years!

● Made by master artisans creating works of art with each stylus
● Special precision polished nude Superb Shibata diamond tip for organic sound quality
● Nude Shibata tip dimensions: .00016 x .0028 inch
● Sound quality and performance beyond current production substitutes
● Low-mass alloy cantilevered fulcrum for groove tracing accuracy and fidelity
● Tracking force: 1.00 -1.75 g
● LP GEAR® stylus - Above and beyond copies and generics

Multigenerational
At LP GEAR®, our business philosopjy prioritizes long-term excellence over short-term gain. We believe that exceptional phono cartridges should offer multigenerational lifetimes of enjoyment or much longer like the Guarneri violin. Older than the USA — 273 years old to be exact, the Vieuxtemps Guarneri Del Gesu-1741 named for its most famous owner the leading Belgian virtuoso and composer who esteemed it so much he wanted to be buried with it, recently became the most expensive violin in the world, selling for an estimated $16 million. Its new owner anonymously donated the historic instrument to violinist Anne Akiko Meyers, on loan for the rest of her life.

Thus we curated the AIN50SS stylus as testament of our esteem for the Audio-Technica AT150MLX cartridge so avid and loyal owners will continue to hear their magic at its best for many decades to come. It is a lofty goal — we believe its new soul transcends its former and latest self. The AIN50SS is LP Gear's Artificial Intelligence (AI) Superb Shibata replacement for the Audio-Technica ATN150MLX and VMN50SH stylus. and spiritual perfection by Japanese shukonin, each stylus divines the grooves with ultimate precision. It has incredibly realistic tone and chemistry that are heard, felt and enjoyed! Using stringently selected materials and handcrafted to physical, mental,

COMPATIBLE AUDIO-TECHNICA CARTRIDGES: AT100, AT7V, AT9V, AT120E/T, VM530EN, VM540ML, VM740, VM750SH, CM960SLC, VM520EB, AT150MLX, AT150SA, AT140LC, AT155LC, and more. Inquire for more.