Ortofon Needles / Stylus

LP TUNES STYLUS FOR ORTOFON OMB-30 OMB30 CARTRIDGE

The LP Tune Stylus 30 for the Ortofon OMB-30 OMB30 cartridge features a highly polished Vivid Line contact diamond with r/R radii of 6/75µm bonded to a thin-wall Zualum cantilever for natural sound quality, with curvature and facets. It extracts more musical content from record grooves thus delivering very high resolution and extended palette of colorful detail, harmonics and micro dynamics.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products below.

LP TUNES STYLUS FOR ORTOFON MF-15S M15S CARTRIDGE

The LP Tunes improved DF-15S DF15S stylus for the Ortofon MF-15S MF15S phono cartridge features a highly polished elliptical round diamond bonded to a hollow metal alloy thin-wall cantilever. It offers superior record groove tracing characteristics and delivers highly vivid, palpable and harmonically accurate sound quality.

LP TUNES STYLUS FOR ORTOFON M-15 M15 SUPER CARTRIDGE

The LP Tunes D15E improved stylus for the Ortofon M-15 M15 Super phono cartridge features a highly polished and superbly profiled special elliptical diamond tip for superior tracing of record grooves. The stylus offers extraordinary sound quality, very high accuracy and superior rendition of voice, music and harmonics.

LP TUNES STYLUS FOR ORTOFON LM-30H LM30H CARTRIDGE

The LP Tunes Stylus 30 for the Ortofon LM-30H LM30H cartridge features a highly polished Vivid Line contact diamond with a r/R radii of 6/75 µm mounted on a thin-wall metal alloy cantilever. It extracts more musical content from record grooves and delivers very high resolution and extended palette of colorful detail, harmonics and micro dynamics. With the high resolution capability of this stylus, the cartridge needs to be realigned and set-up in order to achieve optimal sound quality.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products below.

LP TUNES STYLUS FOR ORTOFON LM-30 LM30 CARTRIDGE

The LP TUNES Stylus 30 for the Ortofon LM-30 LM30 phono cartridge features a highly polished Vivid Line contact diamond with a r/R radii of 6/75 µm mounted on a thin-wall metal alloy cantilever. It extracts more musical content from record grooves thus delivering very high resolution and extended palette of colorful detail, harmonics and micro dynamics. With the high resolution capability of this stylus, the cartridge needs to be realigned and set-up in order to achieve optimal sound quality.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products below.

LP TUNES IMPROVED STYLUS FOR ORTOFON LM-10 LM10 CARTRIDGE

The LP Tunes improved stylus for the Ortofon LM-10 LM10 phono cartridge features a highly polished .0003 x .0007 inch special elliptical diamond mounted on a thin-wall metal alloy cantilever. It offers excellent tracing capability and accurate rendition of voice and music.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products below.

LP TUNES VIVID LINE STYLUS FOR ORTOFON CONCORDE 30 CARTRIDGE

The LP Tunes Stylus 30 for the Ortofon Concorde 30 phono cartridge features a highly polished Vivid Line contact diamond with a r/R radii of 6/75 µm mounted on a thin-wall metal alloy cantilever. It extracts more musical content from record grooves and delivers very high resolution and extended palette of colorful detail, harmonics and micro dynamics. With the high resolution capability of this stylus, the cartridge needs to be realigned and set-up in order to achieve optimal sound quality.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products below.

ORTOFON STYLUS FOR ORTOFON OMT-5E OMT5E CARTRIDGE

The Ortofon Stylus 5E needle stylus for the Ortofon OMT-5E OMT5E phono cartridge features a highly polished elliptical diamond for superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality.

If you seek further listening pleasure and improved sound quality, you can easily upgrade to a higher level of performance by replacing the Ortofon Stylus 5E stylus with an Ortofon Stylus 10, 20, 30 or 40 stylus.

Ortofon Stylus 5E Specifications
- Frequency range: 20Hz-25kHz
- Frequency response: 20Hz-20kHz +2dB
- FIM distortion at recommended tracking force, DIN 45.542: < 1%
- Tracking ability @ 315Hz @ recommended tracking force: 65µm
- Compliance, dynamic, lateral: 20µm/mN
- Stylus type: Elliptical
- Stylus tip radius: 0.3 x 0.7 mil
- Tracking force range: 1.5-2.0g (15-20mN)
- Tracking force, recommended: 1.75g (17.5mN)
- Color: Black

ORTOFON STYLUS FOR ORTOFON OMP-5E OMP5E CARTRIDGE

The Ortofon Stylus 5E needle stylus for the Ortofon OMP-5E OMP5E phono cartridge features a highly polished elliptical diamond for superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality.

If you seek further listening pleasure and improved sound quality, you can easily upgrade to a higher level of performance by replacing the Ortofon Stylus 5E stylus with an Ortofon Stylus 10, 20, 30 or 40 stylus.

Ortofon Stylus 5E Specifications
- Frequency range: 20Hz-25kHz
- Frequency response: 20Hz-20kHz +2dB
- FIM distortion at recommended tracking force, DIN 45.542: < 1%
- Tracking ability @ 315Hz @ recommended tracking force: 65µm
- Compliance, dynamic, lateral: 20µm/mN
- Stylus type: Elliptical
- Stylus tip radius: 0.3 x 0.7 mil
- Tracking force range: 1.5-2.0g (15-20mN)
- Tracking force, recommended: 1.75g (17.5mN)
- Color: Black

ORTOFON STYLUS FOR ORTOFON OMP-3E OMP3E CARTRIDGE

The Ortofon Stylus 3E needle stylus is the standard replacement stylus for the Ortofon OMP-3E OMP3E phono cartridge and its siblings.

For a stylus replacement that offers improved sound quality and performance, refer to the Related Products below.

Ortofon Stylus 3E Specifications
-Frequency range: 20-20kHz
-FIM distortion at recommended tracking force, DIN 45.542: < 1%
-Tracking ability @ 315Hz @ recommended tracking force: 60µm
-Compliance, dynamic, lateral: 20µm/mN
-Stylus type: Elliptical
-Stylus tip radius: 0.3 x 0.7 mil
-Tracking force range: 1.5-2.0g (15-20mN)
-Tracking force, recommended: 1.75g (17.5mN)
-Color: Black

ORTOFON STYLUS 40 FOR ORTOFON OM40 OM 40 SUPER CARTRIDGE

The Ortofon Stylus 40 for the Ortofon OM-40 OM40 Super cartridge features a nude FG 70 diamond for superlative tracing of record grooves. It results in exquisite and accurate rendition of voice, music and harmonics.

For the renowned Shibata stylus replacement, refer to the Related Products below.

ORTOFON STYLUS 40 FOR ORTOFON OM40 OM 40 CARTRIDGE

The Ortofon Stylus 40 for the Ortofon OM-40 OM40 cartridge features a nude FG 70 diamond for superlative tracing of record grooves. It results in exquisite and accurate rendition of voice, music and harmonics.

For the renowned Shibata stylus replacement, refer to the Related Products below.

ORTOFON STYLUS 40 FOR ORTOFON OM40 OM 40 GOLD CARTRIDGE

The Ortofon Stylus 40 for the Ortofon OM-40 OM40 Gold cartridge features a nude FG 70 diamond for superlative tracing of record grooves. It results in exquisite and accurate rendition of voice, music and harmonics.

For the renowned Shibata stylus replacement, refer to the Related Products below.

ORTOFON STYLUS FOR ORTOFON OM-3E OM3E CARTRIDGE

Ortofon Stylus 3E stylus for Ortofon OM-3E OM3E cartridge with higly polished .0003 x .0007 inch special elliptical diamond for long playing life and natural sound quality across the frequency spectrum. 

Ortofon Stylus 3E Specifications
- Frequency range: 20 - 22,000 Hz
- Output voltage at 1 kHz, 5cm/sec.: 4.0 mV
- Channel balance at 1 kHz: 2.0 dB
- Channel separation at 1 kHz: 22 dB
- Channel separation at 15 kHz: 15 dB
- Tracking ability: 60 µm
- Dynamic compliance: 20 µm/mN
- Stylus: .0003 x .0007 inch special elliptical diamond
- Tracking force range: 1.5 - 2.0 g
- Tracking force, recommended: 1.75 g
- Tracking angle: 20°
- Internal impedance, DC resistance: 750 Ohm
- Internal inductance: 450 mH
- Recommended load resistance: 47 K
- Recommended load capacitance: 200-600 pF

ORTOFON STYLUS FOR ORTOFON MAG-2E MAG2E CARTRIDGE

Out of stock. Please see the LP Tunes Elliptical Replacement for the Ortofon DN-160E / DN-152E Stylus or the compatible upgrades below.

The Ortofon replacement stylus for the Ortofon Braun MAG-2E MAG2E cartridge features an elliptical diamond for very accurate tracing of record grooves and high fidelity reproduction of voice and music.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.