JVC Needles / Stylus

STYLUS FOR JVC L-E22 L E22 LE22 TURNTABLE

Out of stock. Please see the 100% compatible Audio-Technica Replacement for JVC DT-57 Stylus.

The JVC L-E22 L E22 LE22 turntable was fitted with a JVC MD-1045 MD1045 phono cartridge and a JVC DT-45 DT45 needle stylus. A photo of the stylus replacement is supplied above. The stylus features a highly polished special conical diamond for long playing life and good rendition of voice and music. The color of the stylus varies.

Do not order this stylus if it looks different from what you have. It will not fit if the original cartridge is missing or has been changed. Please contact us if you need assistance or prefer a new cartridge. If possible, provide us with the markings on the existing cartridge and stylus (look for the brand and model number). Photos will be helpful.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.

JVC MD1045 Cartridge Specifications
- Type: Moving magnet (MM)
- Frequency response: 10-25,000 Hz
- Output voltage @ 1kHz: 2.5 mV
- Channel separation @ 1kHz: 25 dB
- Load resistance: 47 kOhm
- Compliance: 9 x 10^-6 cm/dyne
- Stylus tip: 0.6 mil conical (diamond)
- Replacement stylus: DT-45
- Optimum tracking force: 1.25 g

Note: Specifications provided for reference to the original product only.

LP TUNES STYLUS FOR JVC L-E33 L E33 LE33 TURNTABLE

The JVC L-E33 L E33 LE33 turntable was fitted with a JVC MD-1045 MD1045 phono cartridge and a JVC DT-45 DT45 stylus. A photo of the stylus replacement is supplied above. The stylus features a highly polished special conical diamond for long playing life and good rendition of voice and music. The color of the stylus varies.

● Finest DT-45 stylus for MD-1045 cartridge fitted to JVC L-E33
● Restores performance to original factory specifications
● Special conical diamond tip for good fidelity
● .0006 inch radius for tracing accuracy and reduced record wear
● Made in Japan for highest fidelity and sound quality
● High strength alloy cantilever for responsive contact with grooves
● Genuine, 100% authentic LP TUNES® stylus

Do not order this stylus if it looks different from what you have. It will not fit if the original cartridge is missing or has been changed. Please contact us if you need assistance or prefer a new cartridge. If possible, provide us with the markings on the existing cartridge and stylus (look for the brand and model number). Photos will be helpful.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.

JVC MD1045 Cartridge Specifications
- Type: Moving magnet (MM)
- Frequency response: 10-25,000 Hz
- Output voltage @ 1kHz: 2.5 mV
- Channel separation @ 1kHz: 25 dB
- Load resistance: 47 kOhm
- Compliance: 9 x 10^-6 cm/dyne
- Stylus tip: 0.6 mil conical (diamond)
- Replacement stylus: DT-45
- Optimum tracking force: 1.25 g

Note: Specifications provided for reference to the original product only.

LP TUNES STYLUS FOR JVC L E600 (L-E600 LE600) TURNTABLE

The JVC L-E600J L E600J LE600J, outside USA & Canada, turntable was fitted with a JVC VC MD-1041 MD1041 phono cartridge and a JVC DT41 DT-41 conical needle stylus. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

Do not order this stylus if it looks different from what you have. It will not fit if the original cartridge is missing or has been changed. Please contact us if you need assistance or prefer a new cartridge. If possible, provide us with the markings on the existing cartridge and stylus (look for the brand and model number). Photos will be helpful.

LP TUNES STYLUS FOR JVC L-L1A L L1A LL1A TURNTABLE

The JVC L-LA1 LL1A L L1A turntable was fitted with a JVC MD-1045 MD1045 phono cartridge and a JVC DT-45 DT45 stylus. A photo of the stylus replacement is supplied above. The stylus features a highly polished special conical diamond for long playing life and good rendition of voice and music. The color of the stylus varies.

Do not order this stylus if it looks different from what you have. It will not fit if the original cartridge is missing or has been changed. Please contact us if you need assistance or prefer a new cartridge. If possible, provide us with the markings on the existing cartridge and stylus (look for the brand and model number). Photos will be helpful.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.

JVC MD1045 Cartridge Specifications
- Type: Moving magnet (MM)
- Frequency response: 10-25,000 Hz
- Output voltage @ 1kHz: 2.5 mV
- Channel separation @ 1kHz: 25 dB
- Load resistance: 47 kOhm
- Compliance: 9 x 10^-6 cm/dyne
- Stylus tip: 0.6 mil conical (diamond)
- Replacement stylus: DT-45
- Optimum tracking force: 1.25 g

Note: Specifications provided for reference to the original product only.

LP TUNES STYLUS FOR JVC SRP-B22 SRP B22 SRPB22 TURNTABLE

The JVC SRP-B22 turntable was not always factory fitted with a phono cartridge. For those that were and have not been replaced by another cartridge, the JVC SRP-B22 turntable was pre-installed with a JVC MD-1016B MD1016B phono cartridge and a JVC DT-33S DT33S stylus. A photo of the stylus replacement is supplied above. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

Do not order this stylus if it looks different from what you have. It will not fit if the original cartridge is missing or has been changed. Please contact us if you need assistance or prefer a new cartridge. If possible, provide us with the markings on the existing cartridge and stylus (look for the brand and model number). Photos will be helpful.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.

The replacement for the JVC DT-X1 II DT X1 II DTX1II stylus specified for use with the JVC X1 II cartridge features a Vivid Line natural diamond with exquisitely polished r/R radii of 6/75 µm and carefully mounted on a thin-wall metal alloy tubular cantilever for long playing life and exceptional tracing of record grooves. It offers superbly detailed, full-bodied, harmonically vivid and eloquent sound quality. While there are many designs with different and exotic nomenclatures, our Vivid Line stylus graces music with effortless clarity, faithful accuracy and natural sound quality. The stylus is made in Japan by a world-class manufacturer with a reputation for crafting musically excellent and high-quality replacement styli.

For a lower performance and less expensive replacement stylus refer to Related Products.sound quality, refer to Related Products.

JVC DT-X1 IIE DT X1 IIE DTX1IIE STYLUS REPLACEMENT

The replacement for the JVC DT-X1 IIE DT X1 IIE DTX1IIE stylus specified for use with the JVC X1 IIE cartridge features a highly polished special elliptical natural diamond with r/R radii of .0003 x .0007 inch and carefully mounted on a thin-wall metal alloy tubular cantilever for long playing life and very accurate tracing of record grooves. It offers harmonically detailed, vivid and rich sound quality. The stylus is made in Japan by a world-class manufacturer with a reputation for crafting musically excellent and high-quality replacement styli.

For a stylus replacement that offers superior fidelity and sound quality, refer to Related Products.

The replacement for the JVC 4DT-10X 4DT10X needle stylus is used with the JVC MD-1016Z, 4MP10X and other cartridges within the MD-1016 series and variants. The stylus features a highly polished Shibata diamond for superior tracing of record grooves and superb musical reproduction. The stylus was originally designed for quadraphonic record playing and for audiophiles seeking higher fidelity for their cherished LP records.

The original manufacturer replacement for the JVC 4DT-30X 4DT30X stylus features a special Shibata diamond for superlative tracing of record grooves and reduced distortion and record wear. It results in excellent musical accuracy, naturally sweet tone and complete harmonic integrity. The stylus is made in Japan by a world-class manufacturer with a reputation for crafting musically excellent and high-quality replacement styli.

The original manufacturer replacement for the JVC 4DT-35X 4DT35X stylus features a special Shibata diamond for superlative tracing of record grooves and reduced distortion and record wear. It results in excellent musical accuracy, naturally sweet tone and complete harmonic integrity. The stylus is made in Japan by Audio-Technica.

The replacement for the JVC DT-16 DT16 needle stylus features a highly polished conical diamond for long playing life and effective tracing of record grooves thus resulting in fine detail and clarity.

The original manufacturer replacement for the JVC DT-200E DT200E stylus is used with the JVC MC-200E MC200E moving coil phono cartridge. The stylus features a highly polished special elliptical diamond with a .0003 x .0007 inch scanning radii. It offers superior tracing characteristic and excellent rendition of voice, music and harmonic detail. The stylus is made in Japan by a world-class manufacturer with a reputation for crafting musically excellent and high-quality replacement styli.

The replacement for the JVC DT-21H DT21H needle stylus features a highly polished conical diamond for long playing life and effective tracing of record grooves thus resulting in fine detail and clarity.

The replacement for the JVC DT-21S DT21S needle stylus features a highly polished conical diamond for long playing life and effective tracing of record grooves, thus resulting in fine detail and clarity.