Cartridges

The Audio-Technica AT311EP phono cartridge offers P-mount T4P convenience, superb performance and high accuracy. It is one of the top P-mount cartridges available from Audio-Technica and a favorite by those who value sound quality and who know how to listen well. Furthermore, since the Audio-Technica AT311EP phono cartridge uses a very high quality elliptical stylus that is housed in an industry standard holder, you have assured availability of stylus replacements for many, many years.

Audio-Technica AT311EP Phono Cartridge Specifications
- Output voltage @ 1kHz,5cm/sec: 5mV
- Channel balance: 1.25dB
- Channel separation @ 1kHz/10kHz: 26/18dB
- Frequency response: 15Hz-27kHz
- Tracking force: 1 - 1.5 g
- Stylus type: .03 x .07 mil elliptical
- Cantilever construction: Thin-wall tube
- Recommended load resistance: 47k ohms
- Color: Black/White
- Mounting: P-mount with a separate adapter for 1/2 inch mount

Upgrade your stereo system with the Audio-Technica AT101EP cartridge. Its special elliptical needle offers increased record groove contact thus improving frequency response and accuracy. The Audio-Technica AT101EP cartridge replaces many cartridges that were originally fitted to turntables.

Audio-Technica AT101EP Phono Cartridge Specifications
- Type: Moving magnet
- Frequency range: 20Hz-22kHz
- Channel separation @ 1kHz: 25dB
- Output balance @ 1kHz: 0.5dB
- Stylus pressure: 1 - 1.5 g
- Recommended load resistance: 47k ohms
- Stylus tip: 0.4 x 0.7 mil elliptical
- Cantilever: Aluminum alloy
- Weight: 6 g
- Stylus replacement: Audio-Technica ATN-101EP
- Accessories included: 1/2 mount adapter (as shown in photo), screws and nuts

The new LP Tunes AT95SE phono cartridge improves on the sonic achievement of the best inexpensive cartridge, the AT95E, by offering a higher level of natural sound quality with more fidelity, clarity and harmonic richness graced from the record grooves.

We use the same exact and proven AT95E cartridge body. The difference is the highly polished special elliptical diamond stylus with .0003 x .0007 inch scanning radii bonded to a thin wall Zualum cantilever which enables the rejuvenated unit to recover more fidelity and natural sound quality from the record grooves.

LP Tunes AT95SE Phono Cartridge Details
- Output voltage @ 1kHz, 5cm/sec.: 3.5mV
- Channel balance: Within 2dB
- Channel separation @ 1kHz: > 20dB
- Frequency response: 20Hz-21kHz
- Load resistance: 47k ohms
- Load capacitance 100 - 200 pf
- Stylus type: Special elliptical diamond .0003 x .0007 tracing radii
- Tracking force range: 1.5-2.5 g
- Tracking force recommended: 2 g (20 mN)
- Vertical tracking angle: 20
- Coil impedance @ 1kHz: 2.8k ohms
- Coil inductance @ 1kHz: 400 mH
- Color: Black/Dark Green
- Weight: 6.6 g
- Dimensions (mm): 30.5l x 17w x 17.20h
- Stylus replacement: LP Tunes ATN95SE

Note: Details are subject to change without notice.

If you have lost or broken your stylus guard, we're selling replacements!

Compatible with all Ortofon 2M Series cartridges & styli. 

Have a question? Contact us here!

If you have lost or broken your stylus guard, we're selling replacements!

Compatible with all Ortofon 2M Series cartridges & styli. 

Have a question? Contact us here!

The LP Tunes AT95C phono cartridge is designed for the fastidious turntable owner who aspires for extraordinary musical results, minimal price and an easy upgrade path towards further musical discovery. In this manner, one can have instant gratification and when the listener is ready for further musical enjoyment, all that needs to be done is to upgrade the stylus. You can save from the start and in the future. With the LP Tunes AT95C phono cartridge, you can hear high fidelity captured right from the record grooves. Start listening to what you've been missing!

LP Tunes AT95C Phono Cartridge Specifications
- Output voltage @ 1kHz,5cm/sec.: 4mV
- Channel balance: within 2dB
- Channel separation @ 1kHz: > 20dB
- Frequency response: 20Hz-20kHz
- Load resistance: 47k ohms
- Load capacitance 100-200 pf
- Stylus type: Polished conical diamond stylus
- Tracking force range: 2.0-3.0 g
- Tracking force recommended: 2.5 g (25 mN)
- Vertical tracking angle: 20°
- Coil impedance @ 1kHz: 2.8k ohms
- Coil inductance @ 1kHz: 400 mH
- Color: Black/Red
- Weight: 6.6 g
- Dimensions (mm): 30.5l x 17w x 17.20h
- Stylus replacement: LP Tunes ATN95C

The Denon DL-301 II phono cartridge is the updated version of the popular Denon DL-301. The body style has been changed and output performance has been improved to provide a more detailed and articulate sound. In addition the output level of this standard output moving coil cartridge is slightly higher than most thus providing a strong response with plenty of punch.

Features
1. Vibrating system with rigidity and light weight. The structure of the vibrating system, which is the most important element in determining the performance of the cartridge, employs a double layer tapered cantilever, a cruciform armature, and a minute solid diamond stylus. The use of this rigid and lightweight vibrating system results in proper damping, outstanding trace capability, dynamic sound and light tracking force. You get to enjoy music enormously while preserving the life of your cherished LPs.

2. Rigid body construction. In order to eliminate unnecessary resonance, not only has the structure of the frame been unified with high-strength resin to include the magnet and terminal pins, but also, a light-alloy precision-engineered case has been incorporated. As a result, rigidity of the body's structure has been improved thus resulting in a crystal clean and accurate sound quality.

3. Denon's unique 2-way dumping system. The unique Denon two-way dumping system has been employed to suppress tonal variations due to changes in room temperature and at the same time to obtain level frequency characteristics.

Denon DL-301 II Phono Cartridge Specifications
- Type: Moving coil
- Output voltage: 0.4mV
- Frequency response: 20Hz-60kHz
- Recommended load impedance: Over 100 ohms
- Channel balance @ 1kHz: < 1db
- Channel separation @ 1kHz: > 28dB
- Stylus tip: Special elliptical solid diamond with 0.07 x 0.14 mm rectangular cross section
- Compliance: 13 x 10-6 cm/dyne
- Recommended tracking force: (1.4g +/- 0.2g)
- Color: Gold/Black
- Weight:6 g

Stanton has reintroduced the Pickering NP/AC cartridge. When you order the NP/AC cartridge, you will instead receive the Stanton 400.V3 cartridge.

The NP/AC cartridge is Pickering's "mouse that roared" with a whopping 10mV output level. It's durable, cost-effective, and the loudest cartridge on earth! It can be used in varied applications such as high fidelity home listening, recording to CD, and for jukebox. In addition, when used with the optional D1527 stylus, the NP/AC metamorphoses into a superior 78 RPM phono cartridge.

Pickering NP/AC Phono Cartridge Specifications
- Stylus type: 0.7 mil spherical
- Tracking force: 3 - 7 g
- Frequency response: 20Hz-15kHz
- Output voltage: 10mV
- Weight: 5.5 g
- DC resistance: 535 ohms nominal
- Channel separation @ 1kHz: 20dB
- Inductance: 400 mH nominal

LP Tunes introduces the T4P Reference Series VS phono cartridge for those seeking the best reference quality P-mount phono cartridge.

By preference and conviction the LP Tunes T4P Series of cartridges offer world-class craftsmanship, excellent performance, exemplary value, natural and clean tone and musicality in a simple extraordinary package. They are fitted for P-mount or T4P tonearms. Each is crafted with tolerances held to mere thousandths of an inch. Stringent quality control assures that tolerances and performance criteria are maintained for each product. As in other series within the LP Tunes magnetic phono cartridge range, your investment in a cartridge does not become obsolete. When your appreciation of music and critical listening develop and your demands for sophisticated electronics grow, you can easily and sensibly upgrade performance by installing a better stylus within the series.

The LP Tunes T4P Reference Series VS offers pinnacle performance, musicality and fidelity. It uses a newly reincarnated Shibata diamond each exquisitely polished with precision and then carefully mounted on a thin metal alloy tubular cantilever for long playing life and exceptional tracing of record grooves. Due to the Shibata's exceptional extractive prowess, it was recommended for quadraphonic, quad, CD-4 audio systems and was used in highly acclaimed phono cartridges such as the Grace F9E, Stanton 881S, and Audio-Technica AT20SS. (In 2008, the Shibata diamond was employed by another cartridge manufacturer and is offering a cartridge of similar stature in excess of $600.00.)

The result - excellence in musical accuracy and faithfulness to the original recording. While there are newer designs under different nomenclatures promising better parametric performance, we believe based on our ears that our Shibata-based Series VS cartridge elevates music with faithful accuracy, purity and harmonic completeness. We believe it is a world-class performer and the finest P-mount cartridge crafted today.

LP Tunes T4P Reference Series VS Phono Cartridge Specifications
- Frequency response: 15Hz-29kHz
- Output voltage @ 1kHz, 5cm/sec.: 3mV
- Channel separation @ 1kHz/10kHz: 29/18dB
- Channel balance: 1.5dB
- Vertical tracking force: 1.0-1.6 g
- Stylus shape: Shibata
- Cantilever: Thin-wall tube
- Recommended load impedance: 47k ohms
- Weight: 6 g
- Dimensions (mm): 34l x 10w x 17h
- Stylus replacement: LP Tunes ATNSERIESVS

The Audio-Technica AT110E is a cartridge that captures and conveys the sound and emotion of music that most of its peers overlook. The Audio-Technica AT110E has been around for decades without revision for a very good reason - and that should tell you something about its enduring musicality. Manufactured to Audio-Technica's world class quality standards, each cartridge is completely hand assembled with tolerances held to just thousands of an inch.

The Audio-Technica AT110E phono cartridge LC-OFC Improved delivers a wide sound stage, rich full, natural tone, tight bass, vibrant performance, more musical detail and nuance at a best buy price. It sounds so good and so affordable, a rare combination in high end audio.

Please note: The Audio-Technica AT110E LC-OFC requires about 50-100 hours of actual playing time before it will deliver its musical excellence.

Audio Technica AT110E Phono Cartridge Specifications
- Type: Moving magnet
- Output voltage: 4.5mV
- Frequency response: 20Hz-22kHz
- Load impedance: 47k ohms
- Channel separation @ 1kHz: 26/17dB
- Channel balance @ 1kHz: 1.5dB
- Stylus tip: 0.4 x 0.7 mil elliptical
- Stylus construction: Bonded
- Cantilever construction: Thin-wall tube
- Tracking force: 1-2 g
- Weight: 7.2g
- Stylus replacement: Audio-Technica ATN110E

Reviews & Feedback
A customer's quote: "I must say, the sound quality is SUPERB! The cartridge seems to filter out any scratching noises! How does it do that?..."

Positive Feedback
In Audio Asylum by star man

ORTOFON OMB 10 OMB10 CARTRIDGE
- New old stock in plastic case and LP Tunes packaging. Screws, nuts, and stylus guard included.

The Ortofon OMB 10 OMB-10 phono cartridge is the version of the OM 10 cartridge offered to turntable manufacturers for their use as original equipment with their turntables. Their popularity stems from three compelling reasons: (1) it plays music with authenticity, refinement, and artful competence that makes it endearing; (2) it is sensibly priced; and (3) it offers an upgrade path to highest fidelity. By simply replacing the stylus, an Ortofon OMB 10 owner can upgrade its performance to the highly rated Ortofon OM20, OM30 or OM40 cartridge.

There is a discontinued Super OM cartridge version. The current 2M is a further extension of it. Both illuminate the high frequencies to make it sound livelier — hotter. We prefer the original OM as it delivers an organic, natural, faithful, and honest sound of the recorded material.

Super Upgradeable
All OM models have the same body, construction, and magnetic circuitry. The only difference is the interchangeable stylus unit. Thus, when your level of musical sophistication improves, you can simply switch the existing stylus to the Ortofon Stylus 20, 30 or for pinnacle performance the Ortofon Stylus 40. The Ortofon Stylus 40 offers pinnacle performance for the most demanding listener.

Ortofon OMB 10/ OM 10  Phono Cartridge Specifications
- Output voltage @ 1kHz: 4mV
- Channel balance @ 1kHz: 2.0dB
- Channel separation: 22dB @ 1kHz; 15dB @ 15kHz
- Frequency range: 20Hz-22kHz
- Frequency response: 20Hz-20kHz +3/-1dB
- FIM distortion @ recommended tracking force, DIN 45.542: <1%
- Tracking ability @ 315Hz @ recommended tracking force: 70 µm
- Compliance dynamic lateral: 25 µm/mN
- Stylus type: Elliptical
- Stylus tip radius: r/R 8/18 µm
- Stylus tip mass: 0.5 mg
- Tracking force: 1.25 - 1.75 g (12.5 - 17.5 mN)
- Recommended tracking force: 1.5 g (15 mN)
- Tracking angle: 20°
- Internal impedance DC resistance: 750 ohms
- Internal inductance: 450 mH
- Recommended load resistance: 47k ohms
- Recommended load capacitance: 200 - 500 pF
- Color: Black
- Weight: 5 g

Stylus Replacements
- Standard stylus: Ortofon Stylus 10
- Upgrade stylus: Ortofon Stylus 20

Mono True 78 RPM Cartridge
The AT-MONO3/SP is a true mono 78 RPM cartridge - one of a select few in the world! A true mono cartridge is designed, wired and built only to retrieve signals from the record grooves in the horizontal plane. The groove of a monaural recording is modulated only in the horizontal plane. Stereo recordings, on the other hand, are cut into the vinyl at a forty-five degree angle with a separate channel of information on each of the grove walls, thus requiring the stylus to pick up signals in both the horizontal and vertical plane. As a stereo cartridge sums the channels internally, it picks up noise from the vertical plane of the record grooves. Interestingly, in a mono record much of the surface noise is in the vertical plane, so avoiding this plane is beneficial. By not even picking up or amplifying this information you eliminate a lot of the noise from mono records that you hear when played back through a stereo cartridge.

High Output Moving Coil Mono Cartridge
The Audio Technica AT-MONO3/SP cartridge is special. A high output moving coil cartridge of excellent production quality and wound with PCOCC coil for signal purity, it is designed to deliver excellent fidelity and superb clarity when playing 78 RPM mono records. With its high output of 1.2mV, it can be used without additional pre-preamplification or a MC transformer.

As a Moving Coil mono cartridge of superior design and execution, the AT-MONO3/SP offers a listening experience that is close to musical truth with the detail, high frequency extension, sound stage, harmonic layering, and low frequency response that make other cartridges seem flat and constricted.

Proven in use for many years in Japan, the Audio-Technica AT-MONO3/SP 78 RPM cartridge in now available in the U.S. It brings back the pure joy of discovery and listening pleasure for 78 record playing.

Audio-Technica AT-MONO3/SP Cartridge Specifications
- Tonearm mount: 1/2 inch
- Type: Moving coil, mono 78 RPM mono cartridge
- Frequency response: 45Hz-7kHz¹
- Output voltage @ 1kHz,5cm/sec: 1.2mV
- Tracking force: 3 - 7 g (5 g standard)
- Recommended load: 40 ohms - 47K ohms (determine best value by listening)
- Cantilever: Aluminum alloy
- Stylus: Highly polished special conical 2.5 mil diamond
- Dynamic compliance: 7.0 x 10-6 cm/dyne
- Static compliance: 20.0 x 10-6 cm/dyne
- Dimensions (mm): H16.0 x W16.6 x L26.5
- Weight: 6.8 g
- Accessories included: Screwdriver, screws, washers, nuts, spacer/weight, stylus brush

_______________________________________
Footnote 1: Old 78RPM records were recorded using different equalizations (EQ) depending on the recording label. In listening, we surmise that the narrow specification possibly reflects the difficulty in publishing an accurate extended low and high frequency response range even though this cartridge has this capability.

World-class quality construction, alloy tube cantilever and a highly polished conical diamond tip are hallmarks of the Audio-Technica AT300P phono cartridge. Now, you can upgrade the performance of your turntable and hear music and voice with improved clarity and detail by simply replacing the original cartridge installed in your turntable.

Audio-Technica AT300P Phono Cartridge Specifications
- Output voltage @ 1kHz,5cm/sec: 5mV
- Channel balance: 1.5dB
- Channel separation @ 1kHz/10kHz: 26/16dB
- Frequency response: 20Hz-22kHz
- Stylus type: Conical
- Stylus construction: Bonded
- Cantilever construction: Alloy tube
- Tracking force range: 1 - 1.5 g
- Recommended load resistance: 47k ohms
- Color: Black/White
- Mounting: P-mount with a separate adapter for 1/2 inch mount

The Audio-Technica AT301EP phono cartridge offers P-mount T4P convenience, high performance and musical accuracy. It is a top quality P-mount cartridge and very popular with those seeking an affordable upgrade from the mundane. Furthermore, since the Audio-Technica AT301EP phono cartridge uses an elliptical stylus that is an industry standard, you have assured availability of stylus replacements for many decades.

Audio-Technica AT301EP Phono Cartridge Specifications
- Output voltage @ 1kHz, 5cm/sec: 5mV
- Channel balance: 1.25dB
- Channel separation @ 1kHz/10kHz: 26/17dB
- Frequency response: 15Hz-25kHz
- Stylus type: 0.4 x 0.7 mil elliptical
- Stylus construction: Bonded
- Cantilever construction: Alloy tube
- Tracking force range: 1 - 1.5 g
- Recommended load resistance: 47k ohms
- Color: Black/White
- Mounting: P-mount with a separate adapter for 1/2 inch mount