Audio-Technica Needles / Stylus

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-216EP AT216EP CARTRIDGE

Out of stock. Discontinued. Please see the 100% compatible LP Tunes Conical Replacement Stylus for the Audio-Technica AT-216EP AT216EP Cartridge and Others.

The Audio-Technica stylus for the Audio-Technica AT-216EP AT216EP phono cartridge features a highly polished elliptical diamond with a .0003 x .0007 inch radii. It offers precision tracing and tracking of record grooves and superior rendition of voice, music and harmonics. The color of the stylus varies. The stylus is made in Japan by Audio-Technica.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-2214SH AT2214SH CARTRIDGE

Discontinued. Please see the 100% compatible NSS/e LP Tunes Improved Stylus for the Audio-Technica ATS13 Stylus.

The Audio-Technica ATS-14 ATS14 needle stylus for the Audio-Technica AT-2214SH AT2214SH phono cartridge features a Shibata diamond for superlative tracing of record grooves and reduced distortion and record wear. It results in excellent musical accuracy, naturally sweet tone and complete harmonic integrity. The stylus is made in Japan by Audio-Technica.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-221EP AT221EP CARTRIDGE

Out of stock. Discontinued. Please see the 100% compatible LP Tunes Conical Replacement Stylus for the Audio-Technica AT-221EP AT221EP Cartridge and Others.

The Audio-Technica ATN-216EP ATN216EP needle stylus for the Audio-Technica AT-221EP AT221EP phono cartridge features a highly polished elliptical diamond with a .0003 x .0007 inch radii. It offers precision tracing and tracking of record grooves and superior rendition of voice, music and harmonics. The color of the stylus varies. The stylus is made in Japan by Audio-Technica.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-231LP AT231LP CARTRIDGE

Out of stock. Discontinued. Please see the 100% compatible LP Tunes Conical Replacement Stylus for the Audio-Technica AT-231LP AT231LP Cartridge and Others.

The Audio-Technica stylus for the Audio-Technica AT-231LP AT231LP phono cartridge features a highly polished elliptical diamond with a .0003 x .0007 inch radii. It offers precision tracing and tracking of record grooves and superior rendition of voice, music and harmonics. The color of the stylus varies. The stylus is made in Japan by Audio-Technica.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-2500S AT2500S CARTRIDGE

The Audio-Technica ATN-12S ATN12S needle stylus for the Audio-Technica AT-2500S AT2500S phono cartridge features the highly acclaimed Shibata diamond tip for superior tracking and tracing of record grooves. It offers excellent rendition of voice and music with harmonically complete sound quality. The stylus is made in Japan by Audio-Technica.

Stylus Alternative and Options
- For stylus alternative and accessories that enhance sound quality and fidelity, refer to Related Products.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-2500SX AT2500SX CARTRIDGE

The Audio-Technica ATN-12S ATN12S needle stylus for the Audio-Technica AT-2500SX AT2500SX phono cartridge features the highly acclaimed Shibata diamond tip for superior tracking and tracing of record grooves. It offers excellent rendition of voice and music with harmonically complete sound quality. The stylus is made in Japan by Audio-Technica.

Stylus Alternative and Options
- For stylus alternative and accessories that enhance sound quality and fidelity, refer to Related Products.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-26S AT26S CARTRIDGE

The Audio-Technica ATN-12S ATN12S needle stylus for the Audio-Technica AT-26S AT26S phono cartridge features the highly acclaimed Shibata diamond tip for superior tracking and tracing of record grooves. It offers excellent rendition of voice and music with harmonically complete sound quality. The stylus is made in Japan by Audio-Technica.

Stylus Alternative and Options
- For stylus alternative and accessories that enhance sound quality and fidelity, refer to Related Products.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-29SX AT29SX CARTRIDGE

Out of stock. Please see the 100% compatible Audio-Technica Shibata ATS-12S ATS12S Replacement Stylus (without guard), or the recommended Product Option below.

The Audio-Technica ATN-12S ATN12S needle stylus for the Audio-Technica AT-29SX AT29SX phono cartridge features the highly acclaimed Shibata diamond tip for superior tracking and tracing of record grooves. It offers excellent rendition of voice and music with harmonically complete sound quality. The stylus is made in Japan by Audio-Technica.

Stylus Alternative and Options
- For stylus alternative and accessories that enhance sound quality and fidelity, refer to Related Products.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-30E AT30E CARTRIDGE

The Audio-Technica ATN-30E ATN30E needle stylus for the highly regarded low-output moving coil Audio-Technica AT-30E AT30E phono cartridge is deactivated and is no longer available. The stylus was made in Japan by Audio-Technica.

For the Audio-Technica ATN-31E ATN31E needle stylus, refer to the Related Products.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-30HE AT30HE CARTRIDGE

The Audio-Technica ATN-30HE ATN30HE needle stylus for the highly regarded high-output moving coil Audio-Technica AT-30HE AT30HE phono cartridge features an elliptical diamond with a .0003 x .0007 inch scanning radii. It offers superb tracing of record grooves, long playing life and excellent reproduction and rendition of voice, music and harmonics. The stylus assembly may be disconnected and replaced more than 2,000 times with no appreciable increase in output noise. The stylus is made in Japan by Audio-Technica.

Audio-Technica ATN30HE Stylus Specifications
- Frequency Response: 15Hz-25kHz
- Output voltage @ 1kHz,5cm/sec: 2.0mV
- Channel separation @ 1kHz: Minimum 29dB
- Channel balance @ 1kHz: Within 1dB
- Tracking force: 1.4 - 1.8 g (Nominal force 1.5 g)
- Static compliance: 32 x 10-6 cm/dyne
- Load resistance: 47k ohms

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-312EP AT312EP CARTRIDGE

The Audio-Technica ATN-312EP ATN312EP stylus for the T4P P-mount Audio-Technica Dual Moving Coil AT-312EP AT312EP phono cartridge features a highly polished elliptical diamond for superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality. The stylus is made in Japan by Audio-Technica.

Audio-Technica ATN312EP Specifications
- Type: Moving Coil
- Frequency response: 15 ~ 50,000 Hz
- Output voltage: 0.4 mV
- Output impedance: 10 Ω
- Stylus: Elliptical 0.3 x 0.7 mil
- Dynamic compliance: 10 10-6 cm/dyne
- Tracking force: 1.0-1.5g (1.25g standard)

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-312HEP AT312HEP CARTRIDGE

The Audio-Technica ATN-312EP ATN312EP needle stylus for the Audio-Technica AT-312HEP AT312HEP phono cartridge features a highly polished elliptical diamond for superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality. The stylus is made in Japan by Audio-Technica.

Audio-Technica ATN312EP Specifications
- Type: Moving Coil
- Frequency response: 15 ~ 50,000 Hz
- Output voltage: 0.4 mV
- Output impedance: 10 Ω
- Stylus: Elliptical 0.3 x 0.7 mil
- Dynamic compliance: 10 10-6 cm/dyne
- Tracking force: 1.0-1.5g (1.25g standard)

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-312P AT312P CARTRIDGE

The Audio-Technica ATN-312EP ATN312EP needle stylus for the Audio-Technica AT-312P AT312P phono cartridge features a highly polished elliptical diamond for superb tracking and tracing of record grooves. It results in finer detail and harmonically complete sound quality. The stylus is made in Japan by Audio-Technica.

Audio-Technica ATN312EP Specifications
- Type: Moving Coil
- Frequency response: 15 ~ 50,000 Hz
- Output voltage: 0.4 mV
- Output impedance: 10 Ω
- Stylus: Elliptical 0.3 x 0.7 mil
- Dynamic compliance: 10 10-6 cm/dyne
- Tracking force: 1.0-1.5g (1.25g standard)

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-312S AT312S CARTRIDGE

The Audio-Technica ATN-12S ATN12S needle stylus for the Audio-Technica AT-312S AT312S phono cartridge features the highly acclaimed Shibata diamond tip for superior tracking and tracing of record grooves. It offers excellent rendition of voice and music with harmonically complete sound quality. The stylus is made in Japan by Audio-Technica.

Stylus Alternative and Options
- For stylus alternative and accessories that enhance sound quality and fidelity, refer to Related Products.

AUDIO-TECHNICA STYLUS FOR AUDIO-TECHNICA AT-31E AT31E CARTRIDGE

The Audio-Technica ATN-31E ATN31E needle stylus for the highly regarded low-output moving coil Audio-Technica AT-31E AT31E phono cartridge features a nude elliptical diamond with a .0003 x .0007 inch scanning radii. It offers superb tracing of record grooves, long playing life and excellent reproduction and rendition of voice, music and harmonics. The stylus assembly may be disconnected and replaced more than 2,000 times with no appreciable increase in output noise. The stylus is made in Japan by Audio-Technica.

Audio-Technica ATN31E Stylus Specifications
- Frequency response: 15Hz-50kHz
- Output voltage @ 1kHz, 5 cm/sec: 0.4mV
- Channel separation @ 1kHz: Minimum 30dB
- Channel balance @ 1kHz: Within 1.0dB
- Tracking force: 1.2 - 1.8 g (Nominal force 1.5 g)
- Dynamic compliance: 8.5 x 10-6 cm/dyne (100 Hz)
- Static compliance: 32 x 10-6 cm/dyne
- Load resistance: More than 10 ohms
- Load capacitance: 100 - 200 pf
- Stylus: 0.15 mm nude square, 0.3 x 0.7 mil elliptical diamond