We are currently experiencing an additional 2-3 day delay in shipping. Thank you for your patience! >>> 7/21/2026: LP Tunes starts new platform—Unified Solutions Platform (USP)™. It unifies upgrade options on a single page, simplifying customers' search for high-fidelity turntable component compatibility—such as turntable styli, cartridges, and belts.

enable_marquee::true
AIN20SE Stylus LP Tunes Replacement for Audio-Technica ATN120E AT120E Cartridge Stylus

AIN20SE STYLUS LP TUNES REPLACEMENT FOR AUDIO-TECHNICA ATN-120E ATN120E STYLUS

 Latest special Elliptical replacement for Audio-Technica ATN120E stylus
 Traces the grooves with peerless accuracy and exquisite sound quality
 Crafted by Japanese shokunin seeking to create perfection with each stylus
 Diamond tip r/R radii: 7/75 µm (.0003 x .0007 inch) bonded to high grade cantilever
 LP TUNES® stylus - Above and beyond copies, types, and generics

Specified for the Audio-Technica AT120E AT120E/T cartridges and stylus replacements for the VMN20SE and VMN30NE, The AIN20SE is LP Tunes's Artificial Intelligence (AI) inspired special elliptical replacement for the Audio-Technica ATN120E stylus.

Endowed with advanced materials selected for their positive contribution to sound quality, a highly polished special elliptical diamond tip and kindled by the shukonin's spirit for perfection, each stylus has the innate ability to trace the minute contours of the grooves with sublime accuracy.

Upgrade Stylus Replacements
- Upgrade stylus: Audio-Technica VMN40 Stylus
- Ultimate stylus: LP Tunes AIN60SLC Stylus

AIN3600SLC Stylus

AIN3600SLC Stylus

$350.00

LP TUNES AIN3600SLC STYLUS
- Lifts the sound quality of the the AT3600L to its highest level and music articulation. Music that makes you want to listen®.

Cultural Icon of the Turntable Renaissance
Introduced in the 1970's (~ 50 years ago), the Audio-Technica AT3600L gained notoriety as a throwaway cartridge, a reputation it received as it was factory fitted to the least expensive turntables of that era, a practice that continues even today! In 2000, LP Tunes experimented with it and found that its sound quality could be improved with the installation of higher quality styli, which LP Tunes introduced with finely crafted Japanese models. Rega followed and raised the status of the AT3600L with the introduction of the Rega Carbon cartridge and Rega Carbon stylus. Not to be outdone, LP Tunes released in 2015 the highly esteemed Carbon Fidelity CF3600LE cartridge with its special elliptical CFN3600LE stylus. Stereophile rates the CF3600LE cartridge as a Class C Recommended Component — In the same class as the Ortofon 2M Black ($695), Denon DL103 ($349), Ortofon 2M Blue ($239), and Audio-Technica AT-VM95C, E, H, ML & SH (up to $199).

With ten million estimated former and present users, it has achieved significance and influence as a cultural icon of the turntable renaissance and the 2000s.

For Forever Enjoyment
At LP TUNES®, our philosophy runs counter to conventional wisdom. We believe that the AT3600 should offer multigenerational lifetimes of enjoyment or much longer like the Guarneri violin. Older than the USA — 273 years old to be exact, the Vieuxtemps Guarneri Del Gesu-1741 named for its most famous owner the leading Belgian virtuoso and composer who esteemed it so much he wanted to be buried with it, recently became the most expensive violin in the world, selling for an estimated $16 million. Its new owner anonymously donated the historic instrument to violinist Anne Akiko Meyers, on loan for the rest of her life.

Thus we curated this cartridge as celebration and esteem for the historic Audio-Technica AT3600L cartridge; so devoted and new owners will continue to hear this gem at its best for lifetimes to come. It is a lofty goal — we believe its new soul transcends its original self. It has incredible chemistry and emotion with vinyl playing that connects, is heard, felt and enjoyed!

Aligned to music listeners with an abundance and growth mindset, seeking to be the best they can be, the AIN3600SLC is LP Tunes's Limited production Artificial Intelligence (AI) Special Line Contact replacement for the Audio-Technica ATN3600L stylus and its many variants. Using stringently selected materials and handcrafted to physical, mental, and spiritual perfection by Japanese shukonin, each stylus divines the grooves with ultimate precision and intimacy. It delivers celestial sound quality formerly the firmament of exorbitant MM and MC cartridges.

 Flagship limited production AIN3600SLC stylus for Audio-Technica AT3600L cartridge
 Handcrafted by master Japanese shokunin seeking to create perfection with each stylus
 Ultimate Sound quality (SQ) and performance beyond any stylus replacement!
 Special Line Contact (SLC) diamond tip fastened to a custom alloy cantilever
 Tracking force: 2.5 - 3.5g | Output voltage: 4.25 mV
 Each stylus undergoes QC and listening test as final inspection
 LP TUNES® stylus - Above and beyond copies, types, originals, and generics

AIN440MR High-Grade Stylus for Audio-Technica AT440MLa AT440Mlb AT140LC AT150MLX Cartridges
Vendor:LP Gear

LP GEAR AIN440MR STYLUS
- High-Grade stylus for Audio-Technica AT440ML, AT440MLa AT440Mlb, AT140LC, VM540ML, VM740ML, AT150MLX compatible cartridges

The Audio-Technica AT440MLa, AT440MLb and At150MLX were highly rated cartridges that have been discontinued - victims of the consumer electronics product life cycle where the product life cycle is around 2-3 years which means a product has to be revised or updated every two years or so. On one side, this is beneficial to the industry and consumers since it forces constant research and innovation. On the other hand, it is wasteful and counterproductive. This fosters short-term quality and product thinking - products that have a short-term life on the shelf. They break or sound old after a few years!

 High-Grade N440MR stylus for AT440ML, AT440MLa AT440MLb AT150MLX cartridge
 Made by master artisans perfecting works of art with each stylus
 Special precision polished nude Micro Ridge diamond tip for supreme fidelity
 MicroRidge tip dimensions: 2.5µm × 75µm
 Sound quality and performance beyond current production substitutes
 Low-mass alloy cantilevered fulcrum for groove tracing accuracy and fidelity
 Weight: 0.4 gram
 Tracking force range: 1.8 ~ 2.2 g (2.0 g standard)
 LP GEAR® stylus - Above and beyond copies and generics

AT LP GEAR®, our philosophy runs counterculture. We believe that products created for perfection should last a lifetime of enjoyment or much longer like the Guarneri violin. Older than the USA— 273 years old to be exact, the Vieuxtemps Guarneri Del Gesu-1741 named for its most famous owner, the leading Belgian virtuoso and composer who esteemed it so much he wanted to be buried with it, recently became the most expensive violin in the world, selling for an estimated $16 million. Its new owner anonymously donated the historic instrument to violinist Anne Akiko Meyers, on loan for the rest of her life.

Thus we curated this stylus as testament of our esteem for the Audio-Technica AT440mL and AT150MLX cartridges so devoted owners can continue to hear their gem at its best for many decades to come. It is a lofty goal — we believe its new soul transcends its former self. It has incredible chemistry that is heard, felt and enjoyed!

COMPATIBLE AUDIO-TECHNICA CARTRIDGES: AT100, AT120E/T, AT160ML, VM530EN, VM540ML, VM740, VM750SH, CM960SLC, VM520EB, AT150MLX, AT150SA, AT140LC, AT155LC, AT125LC, AT130E and more (Inquire for more.)

AIN440MR LP Tunes Stylus Replacement for Audio-Technica VMN40ML Stylus

AIN440MR LP TUNES STYLUS REPLACEMENT FOR AUDIO-TECHNICA VMN40ML STYLUS

High-Grade AIN440MR stylus replacement for for Audio-Technica VMN40 stylus
 Made by master artisans perfecting works of art with each stylus
 Special precision polished nude Micro Ridge diamond tip for supreme fidelity
 MicroRidge tip dimensions: 2.5µm × 75µm
 Sound quality and performance beyond current production substitutes
 Low-mass alloy cantilevered fulcrum for groove tracing accuracy and fidelity
 Weight: 0.4 gram
 Tracking force range: 1.8 ~ 2.2 g (2.0 g standard)
 LP GEAR® stylus - Above and beyond copies and generics

The AIN440MR stylus is the inspired replacement conceived by LP Tunes for the Audio-Technica VMN40ML stylus. The AIN440MR features a high-performance capability, making it an excellent upgrade stylus for other Audio-Technica styli that use the same form factor. The stylus features a MicroRidge diamond for superlative performance with less wear and distortion than elliptical or conventional linear contact styli. The small curving rate of the stylus enables it to track and playback the inner part of the record groove that other styli can hardly maintain. Accordingly, the stylus has a much longer average playing life.

LP Tunes AIN440MR Stylus Details
- Type: VM
- Tracking force: 1.8 ~ 2.2 g (2.0 g standard)
- Stylus: Nude MicroRidge (2.5µm × 75µm)
- Cantilever: Aluminum alloy pipe
Note: Specifications are subject to change without notice.

AIN50SS LP Gear Shibata Stylus for AT150MLX VM750SH and Compatible Cartridges
Vendor:LP Gear

AIN50SS LP GEAR SUPERB SHIBATA STYLUS
- Superb Shibata stylus for Audio-Technica AT440MLa, AT440Mlb, AT150MLX, AT150SA, VM750SH, and compatible cartridges

The Audio-Technica AT150MLX is a highly rated cartridge that has been discontinued and superseded by the VM750SH - a victim of the consumer electronics product life cycle where the product life cycle is around 2-3 years which means a product has to be revised or updated every two years or so. On one side, this is beneficial to the industry and consumers since it forces constant research and innovation. On the other hand, it is wasteful and counterproductive. This fosters short-term quality and product thinking - products that have a short-term life on the shelf. They break or sound old after a few years!. On one side, this is beneficial to the industry and consumers since it forces constant research and innovation. On the other hand, it is wasteful and counterproductive. This fosters short-term quality and product thinking - products that have a short-term life on the shelf. They break or sound old after a few years!

 Made by master artisans creating works of art with each stylus
 Special precision polished nude Superb Shibata diamond tip for organic sound quality
 Nude Shibata tip dimensions: .00016 x .0028 inch
 Sound quality and performance beyond current production substitutes
 Low-mass alloy cantilevered fulcrum for groove tracing accuracy and fidelity
 Tracking force: 1.00 -1.75 g
 LP GEAR® stylus - Above and beyond copies and generics

Multigenerational
At LP GEAR®, our business philosopjy prioritizes long-term excellence over short-term gain. We believe that exceptional phono cartridges should offer multigenerational lifetimes of enjoyment or much longer like the Guarneri violin. Older than the USA — 273 years old to be exact, the Vieuxtemps Guarneri Del Gesu-1741 named for its most famous owner the leading Belgian virtuoso and composer who esteemed it so much he wanted to be buried with it, recently became the most expensive violin in the world, selling for an estimated $16 million. Its new owner anonymously donated the historic instrument to violinist Anne Akiko Meyers, on loan for the rest of her life.

Thus we curated the AIN50SS stylus as testament of our esteem for the Audio-Technica AT150MLX cartridge so avid and loyal owners will continue to hear their magic at its best for many decades to come. It is a lofty goal — we believe its new soul transcends its former and latest self. The AIN50SS is LP Gear's Artificial Intelligence (AI) Superb Shibata replacement for the Audio-Technica ATN150MLX and VMN50SH stylus. and spiritual perfection by Japanese shukonin, each stylus divines the grooves with ultimate precision. It has incredibly realistic tone and chemistry that are heard, felt and enjoyed! Using stringently selected materials and handcrafted to physical, mental,

COMPATIBLE AUDIO-TECHNICA CARTRIDGES: AT100, AT7V, AT9V, AT120E/T, VM530EN, VM540ML, VM740, VM750SH, CM960SLC, VM520EB, AT150MLX, AT150SA, AT140LC, AT155LC, and more. Inquire for more.

AIRLINE 6350A  turntable belt replacement
Vendor:Airline

AIRLINE 6350A TURNTABLE BELT REPLACEMENT

The AIRLINE 6350A turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AIWA AF-5050 turntable belt replacement
Vendor:Aiwa

AIWA AF-5050 AF 5050  AF5050 TURNTABLE BELT REPLACEMENT

The AIWA AF-5050 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AIWA AF-5300 turntable belt replacement
Vendor:Aiwa

AIWA AF-5300 AF 5300 AF5300  TURNTABLE BELT REPLACEMENT

The AIWA AF-5300  MODEL turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AIWA AP-2100-HE turntable belt replacement
Vendor:Aiwa

AIWA AP-2100 HE   AP 2100 HE  AP2100HE TURNTABLE BELT REPLACEMENT

The AIWA AP-2100 HE  turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

 

5.0
AIWA AP-D35 turntable belt replacement
Vendor:Aiwa

AIWA AP-D35 AP D35 APD35 TURNTABLE BELT REPLACEMENT

The AIWA AP-D35 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AIWA AP-D35H turntable belt replacement
Vendor:Aiwa

AIWA AP-D35H AP D35H APD35H TURNTABLE BELT REPLACEMENT

The AIWA AP-D35H turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AIWA LP-3000K turntable tonearm belt replacement
Vendor:Aiwa

AIWA LP-3000K    LP 3000K  LP3000K  TURNTABLE TONEARM BELT REPLACEMENT

The AIWA LP-300K turntable tonearm belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AIWA LP-3000U turntable tonearm belt replacement
Vendor:Aiwa

AIWA LP-3000U   LP 3000U   LP3000U TURNTABLE TONEARM BELT REPLACEMENT

The AIWA LP-3000U turntable tonearm belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AIWA LX-11 replacement drive belt for linear turntable
Vendor:Aiwa

AIWA LX-110   LX 110   LX110 REPLACEMENT DRIVE BELT FOR LINEAR TURNTABLE 

The AIWA LX-110 REPLACEMENT DRIVE BELT FOR LINEAR TURNTABLE is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

AIWA LX-110 turntable tonearm belt replacement
Vendor:Aiwa

AIWA LX-110    LX 110  LX110   TURNTABLE TONEARM BELT REPLACEMENT

The AIWA LX-110 turntable tonearm belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.