The new LP TUNES is live as a pre-release. Product options are presented on a single page so you can make the best purchase decision.

Zenith MC-9030 MC 9030 MC9030 turntable belt replacement
Vendor:Zenith

Zenith MC-9030    MC 9030    MC9030 TURNTABLE BELT REPLACEMENT

The Zenith MC-9030 turntable belt replacement is designed for higher torque, smooth rotational speed and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

Zenith MC-9040 MC 9040 MC9040 turntable belt replacement
Vendor:Zenith

Zenith MC-9040   MC 9040    MC9040 TURNTABLE BELT REPLACEMENT

The Zenith MC-9040 turntable belt replacement is designed for higher torque, smooth rotational speed and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

Zenith MC-9045 MC 9045 MC90405 turntable belt replacement
Vendor:Zenith

Zenith MC-9045   MC 9045   MC9040 TURNTABLE BELT REPLACEMENT

The Zenith MC-9045 turntable belt replacement is designed for higher torque, smooth rotational speed and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

Zenith MC-9055 MC 9055 MC9055 turntable belt replacement
Vendor:Zenith

Zenith MC-9055    MC 9055    MC9055 TURNTABLE BELT REPLACEMENT

The Zenith MC-9055 turntable belt replacement is designed for higher torque, smooth rotational speed and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.



Zenith MH-2605 MH 2605 MH2605 console turntable belt replacement
Vendor:Zenith

Zenith MH-2605    MH 2605   MH2605 CONSOLE  TURNTABLE BELT REPLACEMENT

The Zenith MH-2605 console turntable belt replacement is designed for higher torque, smooth rotational speed and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

Zenith ML-2670 ML 2670 ML2670 turntable belt replacement
Vendor:Zenith

Zenith ML-2670   ML 2670   ML2670  TURNTABLE BELT REPLACEMENT

The Zenith ML-2670  turntable belt replacement is designed for higher torque, smooth rotational speed and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

 

Zenith MM-2640 MM 2640 MM2640 turntable belt replacement
Vendor:Zenith

Zenith MM-2640   MM 2640  MM2640 TURNTABLE BELT REPLACEMENT

The Zenith MM-2640 turntable belt replacement is designed for higher torque, smooth rotational speed and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

Zenith MM-2650 MM 2650 MM2650 turntable belt replacement
Vendor:Zenith

Zenith MM-2650   MM 2650   MM2650  TURNTABLE BELT REPLACEMENT

The Zenith MM-2650 turntable belt replacement is designed for higher torque, smooth rotational speed and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

Zenith MM-2670 MM 2670 MM2670 turntable belt replacement
Vendor:Zenith

Zenith MM-2670   MM 2670     MM2670 TURNTABLE BELT REPLACEMENT

The Zenith MM-2670 turntable belt replacement is designed for higher torque, smooth rotational speed and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.



Zenith SFH 2025T (SFH2505T) turntable belt
Vendor:Zenith

ZENITH SFH 2025t TURNTABLE BELT REPLACEMENT

Zenith SFH 2025T (SFH2505T) turntable belt by LP Tunes designed for rotational accuracy, quiet operation, and long-playing life

5.0
Zerostat 3 Anti-Static Pistol by Milty
Vendor:Milty
ZEROSTAT3 ANTI-STATIC PISTOL BY MILTY
- Proven efficacy in the laboratory, studio and home. See demo and instructional video here.

Effective at neutralizing static charges on virtually any surface without the need for sprays, the Zerostat 3 by Milty helps keep LP phonograph records, vinyl, CDs, DVDs, film, negatives, lenses, glass, and plasticware static-free, dust-free and lint-free. It is the latest development and incarnation of the renowned Zerostat piezo-electric pistol that has been proven worldwide in neutralizing static electricity found in the laboratory, office, and home. Each Zerostat 3 comes with complete instructions including a test procedure to confirm that the unit is working properly.

FAQ

How do I use it?
Hold the Zerostat 3 within 12" (30.5 cm) of the surface or object to be treated. Squeeze the trigger slowly for about two seconds, to emit a stream of positive ionized air over the surface of the object. As the trigger is slowly released, a negative flow of air ions is produced resulting in static neutralization. Repeat this procedure at several points across the surface of the object.

How much charge is given off?
Each squeeze of the trigger results in a discharge, when stated in units of charge, is 1.5 Coulumbs.

How long will it last?
One can reasonably expect on the order of 10,000 such "squeeze cycles" during the lifetime of a Zerostat 3 unit, although the typical Zerostat 3 will last much longer, sometimes as long as up to 50,000 trigger squeezes. The Zerostat 3 needs no batteries or electrical supply nor does it contain any radioactive components.

Where can it be used?
The Zerostat gun, in theory, will work in any atmosphere but great caution must be exercised before using it with or in flammable or combustible gases.

Are there replacement parts?
The Zerostat 3 is designed to be a disposable product. It is not built to be taken apart and there are not replacement parts.

Is it safe?
The Zerostat is "safe" but we would still advise keeping it out of the reach of children who could easily see it as a toy. One should never press the "muzzle" against their skin and squeeze the trigger, it could cause quite a sting. We also advise never to carry this product as carry-on luggage on a plane flight. It could be mistaken for a lethal object! You could be held up to the point of missing your flight while explaining to security personnnel just what is a Zerostat. This cautionary note is directed to many service engineers who carry a Zerostat 3 as part of their tool kit.

How much does it weigh?
The net weight of the Zerostat gun is 135 g (0.30 lbs). The typical packaging used for the shipment of a single Zerostat results in a shipping weight of 200 g (0.44 lbs). The unit is highly portable and easy to control and handle.

What is the size of it?
4.5" x 6.5"

What colors does it come in?
The Zerostat 3 originally came in red. The new Zerostat 3 comes in blue.

Zenith 169-335 169 335 169335 turntable belt replacement
Vendor:Zenith

Zenith 169-335    169 335   169335 TURNTABLE BELT REPLACEMENT

The Zenith 169-335 turntable belt replacement is designed for higher torque, smooth rotational speed and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

 

5.0
ZUPREME 10G Headshell made in Japan
Vendor:LP Tunes
ZUPREME 10G
<p>
The enchanting LP Gear Zupreme&#8482; 10G headshell is designed for supreme fidelity and compatibility with most turntables equipped with a standard half-inch mount tonearm &mdash; so now, in LP GEAR-style many more can enjoy more music.
Engineered and then Hand-assembled and polished to satin perfection by artisans in Japan, the LP Gear 10G headshell features a 3.0mm thick Zupreme Magnesium alloy 12.7mm &times; 51.5mm frame for structural strength & low resonance.
</p>
<p>
For supreme electrical transfer, heavily plated gold plugs and very high purity copper twisted wires are used as base material. Each twisted wire is exquisitely cocooned and silk-wrapped to maintain the conductive unitary integrity of high purity copper.
</p>
<p>
The LP Gear 10G headshell is also horizontally adjustable (azimuth) via an slotted head screw. This is a critical feature exclusive to the most technically advanced headshells. It enables the user to horizontally align the diamond tip of a stylus
for correct minute tracing of record grooves thus resulting in highest fidelity. An allen wrench is supplied with the package.
</p>
<p>
Tonearm friendly 10.1g total weight for use with most turntables without need for additional counterweight.