Products

78 RPM STYLUS FOR TEAC LP-U200 LP U200 LPU200 TURNTABLE

The Teac LP-U200 LP U200 LPU200 turntable was fitted with a Teac needle stylus. A photo of the stylus replacement is supplied above. The stylus features a 3.0 mil polished diamond for long playing life and correct tracing of 78 RPM record grooves. It offers minimal groove wear and accurate rendition of voice and music. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

78 RPM STYLUS FOR TEAC MC-D800 MC D800 MCD800 TURNTABLE

The Teac MC-D800 MC D800 MCD800 turntable was fitted with a Teac needle stylus. A photo of the stylus replacement is supplied above. The stylus features a 3.0 mil polished diamond for long playing life and correct tracing of 78 RPM record grooves. It offers minimal groove wear and accurate rendition of voice and music. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

78 RPM STYLUS FOR TEAC MC-D800-B MC D800 B MCD800B TURNTABLE

The Teac MC-D800-B MC D800 B MCD800B turntable was fitted with a Teac needle stylus. A photo of the stylus replacement is supplied above. The stylus features a 3.0 mil polished diamond for long playing life and correct tracing of 78 RPM record grooves. It offers minimal groove wear and accurate rendition of voice and music. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

78 RPM STYLUS FOR TEAC MC-D800-CH MC D800 CH MCD800CH TURNTABLE

The Teac MC-D800-CH MC D800 CH MCD800CH turntable was fitted with a Teac needle stylus. A photo of the stylus replacement is supplied above. The stylus features a 3.0 mil polished diamond for long playing life and correct tracing of 78 RPM record grooves. It offers minimal groove wear and accurate rendition of voice and music. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

78 RPM STYLUS FOR TEAC SL-A200 SL A200 SLA200 TURNTABLE

The Teac SL-A200 SL A200 SLA200 turntable was fitted with a Teac SPL-102 SPL102 needle stylus. A photo of the stylus replacement is supplied above. The stylus features a 3.0 mil polished diamond for long playing life and correct tracing of 78 RPM record grooves. It offers minimal groove wear and accurate rendition of voice and music. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

If the stylus above differs from what you have, then it means you no longer have the fitted cartridge. For us to assist you further, we need the cartridge brand and model number. This info is usually inscribed on the cartridge and stylus.

78 RPM STYLUS FOR TECHNOSONIC AEW-620 AEW 620 AEW620 TURNTABLE

The 78 RPM stylus for the Technosonic AEW-620 AEW 620 AEW620 turntable features a 3.0 mil polished diamond designed specifically for the correct tracing of the wide grooves of 78 RPM records. It results in minimal groove wear and accurate rendition of voice and music. The stylus is made in Japan by a world-class manufacturer with a reputation for crafting musically excellent and high-quality replacement styli.

A very common misconception is that you can use an LP stylus for playing 78 RPM records. This is one quick and sure way to damage the 78 RPM record grooves. To maintain the playback fidelity of your 78 record, you really need to use a stylus designed for 78 RPM records, otherwise with just a single playing, you could ruin the fidelity of the record grooves. Moreover, the LP stylus is much narrower than the 78 RPM record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high-surface noise.

78 RPM STYLUS FOR VESTAX HANDY TRAX TURNTABLE

The Vestax Handy Trax turntable was fitted with a 78 RPM stylus. A photo of the stylus replacement is supplied above. The stylus features a 3.0 mil highly polished diamond for long playing life and correct tracing of 78 RPM record grooves. It offers minimal groove wear and accurate rendition of voice and music. The color of the stylus varies. Please verify and use this as a guide only since the cartridge and stylus may have been changed through the years.

To maintain the playback fidelity of your 78 RPM records you really need to use a stylus designed for 78RPM records. A very common misconception is that you can use a LP stylus for playing 78 records. This is one quick and sure way to damage the 78 record grooves. Moreover, the LP stylus is much narrower than the 78 record groove hence the tip will slide to the bottom of the groove where debris has collected for many decades. This results in extraordinarily high surface noise.

Do not order this stylus if it looks different from what you have. It will not fit if the original cartridge is missing or has been changed. Please contact us if you need assistance or prefer a new cartridge. If possible, provide us with the markings on the existing cartridge and stylus (look for the brand and model number). Photos will be helpful.

Upgrade Options
- For upgrades and accessories that enhance sound quality and fidelity, refer to Related Products.

88-100Q/ATS-12S SHIBATA STYLUS

The 88-100Q is a Jico replacement needl that can be used for the Audio_Technica ATS12S and KENWOOD / Trio N-42 stylus and has the same performance as original.

 

ACCUTECH AMC-4914   AMC 4914   AMC4914 TURNTABLE BELT REPLACEMENT

The Accutech AMC-4914 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

 

 

ACOS REGA TURNTABLE BELT REPLACEMENT

The ACOS REGA turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

ACOUSTIC SIGNATIRE MANFRED TURNTABLE BELT REPLACEMENT

LP TUNES REPLACEMENT BELT FOR ACOUSTIC SIGNATURE WOW XL 

The LP Tunes turntable belt replacement for the Acoustic Signature Wow XL is designed for rotational accuracy, tranquil operation and long-playing life.

ACOUSTIC SOLID WOOD MPX TURNTABLE ROUND BELT REPLACEMENT

The Acoustic Solid Wood MPX round turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here.

ACOUSTICAL 2600 TURNTABLE BELT REPLACEMENT

The ACOUSTICAL 2600 turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.

ACOUSTICAL 2800 TURNTABLE BELT REPLACEMENT

The ACOUSTICAL 2800  turntable belt replacement is designed for higher torque, smooth rotational speed, and reduced resonance transmissions into the platter.

If you are unsure if this is the correct belt, please use our free belt matching service here 

For upgrades and enhancements to sound quality and fidelity please refer to the Related Products below.