LP Gear CARBON FIDELITY CFNT4PSE stylus
- Music that makes you want to listen.
Listen to the new voice of music. Carbon fiber composites offer 10 times the strength of steel at half the weight. Codeveloped and designed with LP GEAR by Audio-Technica's best engineers, the new Carbon Fidelity T4P Spectra Elliptical (CFNT4PSE) stylus benefits from the latest quality parts and materials technology that includes a carbon fiber cantilever that seriously upgrade performance. The updated design, tight specifications, Twin-Flux magnets, high-quality moving system fulcrum and radial damping ring allied with a Spectra elliptical diamond tip produce music that makes you want to listen.
Existing CFT4PSE cartridge owners will continue to enjoy their elevated sound quality with this stylus. Owners of the AT3472 cartridge and its many models can also elevate sound quality by simply swapping their existing stylus with the CFNT4PSE stylus.
Mastered to illuminate against lofty cartridges the majority of listeners wouldn't encounter, the CFT4PSE touches and endears the more you listen. You won't want to go back to your underperforming or pricey cartridge. You'll hear, feel and sense the music exquisitely rendered harmonically full-bodied, refractive and refreshingly crystal clean with luminous detail spatially radiating with realness. You'll experience remarkable note clarity, projection and nuanced tonal complexity previously unheard and unappreciated. 1
CFNT4PSE Stylus Details
- Type: Moving Magnet VM Dual Magnet Stereo
- Output voltage @ 1kHz,5cm/sec.: 2.5 mV
- Channel balance at 1kHz: 2.0 dB or less
- Channel separation @ 1kHz: over 18 dB
- Frequency response: 20Hz-20kHz
- Load resistance: 47k ohms
- Stylus type: 0.3 0.7 mil Spectra Elliptical diamond
- Cantilever: Super Carbon Fiber
- Tracking force range: 1.25 0.25 g (12.26 mN)
- Recommended break-in duration: 30 hours
- Color: Indigo, White LP GEAR logo
____________________________________
Footnote 1: A high resolution system is needed to experience the Full Spectra Sound of the CFT4PSE. LP Gear Music listening equipment: Graham Slee Reflex M phono preamp, Graham Slee Elevator EXP headamp, Denon AU-300LC Step-up transformer, Graham Slee Proprius mono amps, Quicksilver Silver 88 mono amps, Roadrunner Digital Turntable Tachometer, Sota Sapphire turntable, Technics SL-3 turntable, Audience SE Phono Cable, Audience Ohno speaker cables, Rogers LS3/5A speakers, Audience ClairAudient 1+1 Loudspeakers, Krell LAT 2 speakers, Yamaha NS1000M speakers, LP Gear CF3600LE cartridge, Ortofon 2M Red cartridge, Ortofon 2M Blue cartridge, Ortofon 2M Bronze cartridge, Rega Carbon, Supex SD 901 Super cartridge, Denon DL-103 cartridge, Denon DL-110 cartridge, Grace F-9E cartridge.
Customer Reviews
Very satisfied
Great sound quality totally was surprised better than rxp3 Shure replacement highly recommend ⭐⭐⭐⭐⭐
Sounds really good without breaking the bank! Fit my old Audio Technica TM-3 cartridge!
Purchased this after customer support confirmed this stylus would work with my old audio technica cartridge. Also confirmed that this stylus may sound better than the recommended audio technica stylus.
Both needles work well but this stylus does sound a bit better. Crisp, clean sound all around.
As budget styli go, this is a decent performer. The sound is smooth though not as full as my more expensive cartridge/stylus that I also use. Probably not the fault of the stylus entirely, it is an old budget cartridge.
Clear, direct sound without appreciable artifact- great sound in all ranges. Great purchase!
Very satisfied
Replaced the stylus on a 1985 Technics linear tracking turntable. Very noticeable improvement in the sound quality. Very happy with the product. Had forgotten how good vinyl can sound.