Audio-Technica AT-OC9/III cartridge

Audio-Technica AT-OC9/III cartridge

SKU: ATOC9III

  • $499.95
  • Save $629

AUDIO-TECHNICA AT-OC9/III AT OC9/III ATOC9/III CARTRIDGE
- Musical excellence with a great balance of dynamics, natural harmonics and detail retrieval

The Audio-Technica AT-OC9/III is the latest evolution of the Audio-Technica AT-OC9 cartridge originally launched in 1987. Over the years the Audio-Technica AT-OC9 series has undergone a number of model changes both inside and outside Japan, and it has continued to be a best seller for over 20 years. While drawing on the basic design of the Audio-Technica AT-OC9ML/II which has been available exclusively in overseas markets and which has received critical acclaim all these years, the Audio-Technica AT-OC9/III is the result of a fresh approach based on a thorough review of the stylus tip, cantilever, magnetic circuit parts, damper and other aspects designed to track and reproduce the highest sound quality. With the new Audio-Technica AT-OC9/III cartridge you will experience musical opulence and expressiveness of sound layered on depths of silence.

AT-OC9/III Special Features
- Special line contact stylus with solid boron cantilever
- Neodymium magnet and permendur yoke for increased magnetic concentration and energy
- PCOCC used for coils and terminal pins for pure electrical transmission
- Dual moving coil for high separation and wide response
- Especially strong and rigid VC mold holds the coils in place for minimized vibration
- Precision-crafted aluminum alloy body and hard resin structure designed for high rigidity, minimized vibration and improved signal to noise ratio
- Brass mounting screws designed to optimally produce high sound quality for the cartridge

Audio-Technica AT-OC9/III Cartridge Specifications
- Tonearm mount: 1/2 inch
- Type: Moving coil
- Frequency response: 15Hz-50kHz
- Output voltage @ 1kHz,5cm/sec: 0.4mV
- Tracking force: 1.8-2.2 g (2.0 g standard)
- Recommended load impedance: Minimum 100 ohms
- Coil impedance: 12 ohms
- DC resistance: 12 ohms
- Channel separation @ 1kHz: 30dB
- Channel balance @ 1kHz: >0.5dB
- Dynamic compliance: 18.0 x 10-6cm/dyne (100Hz)
- Static compliance: 35 x 10-6cm/dyne
- Stylus type: Contact line diamond 0.0016 0.00028 inch
- Cantilever: 0.26 solid boron
- Vertical tracking angle: 23
- Dimensions (mm): L25.7 x W16.8 x H17.3
- Weight: 8 g
- Accessories included: Nonmagnetic Screwdriver, washers, stylus protector, screws, nuts, stylus brush, PCOCC lead wire set

Please note: Moving coil cartridges require receivers and pre amps with special compatible inputs. Their stylus assemblies are not user-replaceable.

________________________________________________

Footnote 1: HiFi New & Record Review, " Audio-Technica AT-OC9/III"



JOIN OUR NEWSLETTER

Stay in the loop with LP Tunes sales, promotions & deals!

★ Reviews ★

Let customers speak for us

1284 reviews
94%
(1207)
6%
(73)
0%
(1)
0%
(3)
0%
(0)
Grado 8MZ for my older ZF1 Grado cartridge

Grado 8MZ for my older ZF1 Grado cartridge Fits like a charm and sounds awesome, clarity and great bass and highs and lows. Great choice for alternative stylus .

All good

Great service!!

Waiting still.

The belt just crossed the Canadian border today. It may take another week before getting to my home. Wait and see...

I haven’t receive my order yet. Still waiting

Saved a wonderful turntable and cartridge

I found a Dual CS508 ULM turntable at the local Thrift Store. It still had the AT cartridge installed utilizing the Dual 1/2" adapter. I made a simple repair but upon testing, the cartridge had no output. I removed the headshell adapter and found that "fatigue" had cause the adapter to crack causing a loss of contact with the tonearm connection. I had bought to 1/2" adapters from ebay and transferred the AT cartridge to the new adapter and mounted it back on the tonearm. The turntabled played perfectly. As a matter of protocol, I ordered a new stylus from LP Tunes that fit perfectly. Thank you for still having this stylus in stock.